Skip to content
Gas furnace and water heater in a home basement
Assurance HVAC Heating & Cooling of North York

Furnace repair in North York homes

(647) 584-3959Open 24/7, day or night

Our TSSA-certified gas technicians handle furnace repair in North York for every kind of house, from the 1950s bungalows of Bathurst Manor and Lawrence Manor to the rebuilt custom homes of York Mills and Bayview Village. We track down the part that actually failed, quote one flat price before touching it, and put the repair under a written workmanship warranty. Assurance HVAC Heating & Cooling of North York works across the district as an HVAC contractor in North York, with common furnace parts on every truck.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 584-3959Used only to book your visit. Privacy

Key takeaways

  • Repairs for bungalows, split-levels, townhouses and custom homes in every North York neighbourhood.
  • Furnace repairs are done by TSSA-certified gas technicians, WSIB covered and insured.
  • A flat diagnostic fee quoted on the phone, then a repair price you approve.
  • Booked repairs get a two-hour arrival window and a text when we’re on the way.
  • Heat gone at night? Call the North York line on this page, answered 24/7.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of North York service team.

On this page
  1. Warning signs that call for furnace repair in North York
  2. Quick checks before you book a repair
  3. Furnace repair in North York bungalows and split-levels
  4. Repairs in York Mills and Bayview Village custom homes
  5. The furnace parts that fail most often
  6. High-efficiency furnace repair: vents and condensate
  7. What to expect from furnace repair in North York
  8. Repair or replace a furnace from the early 2000s?
  9. What sets the price of furnace repair in North York homes?
  10. Furnace brands we repair in North York basements
  11. Gas smells, CO alarms and when not to repair
  12. No heat in a North York home after hours
  13. Serving every North York neighbourhood
  14. Furnace repair questions from North York homeowners

Warning signs that call for furnace repair in North York

Book furnace repair in North York when the house stops warming up, the furnace runs in short bursts, or it starts making sounds it didn’t make last winter. A furnace not working properly usually warns you first, and acting on those early signs tends to mean a smaller repair and fewer cold hours.

  • Furnace blowing cold air while the thermostat is calling for heat
  • Burners that light, then go out a few seconds later
  • Short cycling, where the furnace starts and stops every few minutes
  • A new squeal, rattle or hum from the blower or inducer
  • Water on the floor beside a high-efficiency furnace

In a finished North York basement, the furnace may hide in a closet behind a louvred door, so these signs are easy to miss. Open the closet door now and then and listen through a full cycle.

Quick checks before you book a repair

Five simple checks can bring the heat back without a visit: the filter, the thermostat, the power, whether the front panel is seated and, on a condensing furnace, the condensate drain. They take about ten minutes with a flashlight, and if the heat stays off, you’ll have details to pass on.

  • Filter: if no light shows through it, replace it, because a choked filter makes the furnace overheat.
  • Thermostat: Heat mode, a few degrees above room temperature, fan on Auto, fresh batteries.
  • Power: the furnace breaker, plus the light-style switch near the furnace that gets bumped in crowded storage rooms.
  • Front panel: if it looks ajar, mention it when you call rather than taking it off.
  • Condensate: a full pump or water around the trap can stop a high-efficiency furnace cold.

Before switching anything off, note how the status light is blinking if you can see it without opening the furnace. Losing power can erase the code.

Furnace repair in North York bungalows and split-levels

Many bungalows, split-levels and backsplits in Bathurst Manor, Lawrence Manor, Don Mills and Victoria Village still move air through the original ducts, laid out for an unfinished basement and often undersized for today’s furnace. That mismatch is behind a lot of the repairs we make in these homes: overheating, tripped limit switches and blower motors that wear out early.

When the ducts can’t carry enough air, heat builds up inside the furnace and the high limit switch cuts the burners. The blower keeps going, the house cools, and the cycle starts over. A new switch won’t cure that, so we measure temperature rise and static pressure, and look for return grilles lost behind basement renovations, before quoting.

Repairs in York Mills and Bayview Village custom homes

The large rebuilds in York Mills, Bayview Village, Hogg’s Hollow and Armour Heights tend to run more complex equipment: two-stage or modulating furnaces, variable-speed ECM blowers, zone dampers and sometimes a second furnace for the upper floor. Repairs there start with working out which piece of the system is really at fault before any part is replaced.

In a North York home with two furnaces, one can end up covering for the other. If the main-floor unit keeps tripping its limit switch while the upstairs one runs almost nonstop, the cause may be a stuck damper starving one furnace of air, or thermostats wired to the wrong units. We read the board’s stored fault history and test each damper before naming a failed part.

The furnace parts that fail most often

Most gas furnace repair comes down to a short list of furnace parts, and each one has a symptom that points to it. We test them in the order the furnace uses them during start-up, so you pay for the part that failed rather than a guess.

Common furnace parts, their job and the usual sign of trouble
PartWhat it doesUsual sign of trouble
Control boardRuns start-up and stores fault codesNo response to the thermostat, or a board error
Inducer motorDraws combustion gases into the ventA whine or rattle at start-up, or no start at all
Pressure switchProves the vent is drawing before ignitionInducer spins but the burners never try to light
Hot surface igniterGlows to light the gasInducer runs, no flame appears, then a lockout
Flame sensorConfirms the burners are litFlame catches, then drops out within seconds
Blower or ECM motorPushes warm air through the ductsBurners run but little air reaches the rooms
Limit switchCuts the burners if the furnace overheatsHeat comes on briefly, then stops while the fan carries on
Condensate trap and drainDrains the water a condensing furnace makesPuddles, gurgling or a pressure fault code

One finding ends the repair talk: a cracked heat exchanger can leak carbon monoxide into the air stream, so that furnace stays off.

High-efficiency furnace repair: vents and condensate

High-efficiency furnace repair often starts outside the house. Condensing furnaces vent through plastic pipes, usually a pair on a side wall, and where those pipes end near a North York driveway, snow from a shovel or a snow blower can cover them and trip the pressure switch. Clearing them gently by hand is often enough.

Inside, the condensate trap collects sludge every season, and a condensate pump tucked into a basement closet can fail quietly until the furnace shuts off. We clean the trap, test the pump and make sure the exhaust pipe pitches back toward the furnace so water can’t pool in it.

What to expect from furnace repair in North York

Every visit runs the same way. You book, we call back with a two-hour arrival window, and you get a text as the technician heads over. They test the furnace, show you the fault and give you one flat price. Nothing is repaired until you agree to that price, and it doesn’t change once work begins.

  • Share the symptoms, the furnace’s rough age and brand, and any fault code when you book.
  • Get a flat repair price, plus a replacement figure for an older furnace.
  • See complete heating cycles run after the fix, with the safety controls confirmed.

If a repair we made doesn’t hold, our written workmanship warranty brings us back to put it right.

Repair or replace a furnace from the early 2000s?

Plenty of North York furnaces date from the early 2000s and are now near the 15 to 20 years most gas furnaces last. At that age a small part like a flame sensor is still worth fixing, but a failed heat exchanger or control board usually tips the decision toward a new furnace.

When a repair makes sense and when replacement is the better spend
What you’re weighingLean toward repairLean toward replacement
Furnace ageUnder about 15 yearsNear or past 15 to 20 years
The failed partIgniter, flame sensor, switch or capacitorHeat exchanger, or a board or blower on an older unit
Recent historyFirst breakdown in several wintersA repair call most winters
EfficiencyAlready a condensing furnaceA mid-efficiency furnace venting into the chimney

You see both prices together, along with the option we’d choose ourselves. If replacing wins, our page on furnace installation in North York explains how we size the new one.

What sets the price of furnace repair in North York homes?

Furnace repair cost in a North York home comes down to four things: the failed part, the furnace’s brand and age, how hard it is to reach, and whether we carry the part. Because those vary so much, we don’t publish prices. You hear the diagnostic fee before booking and approve the repair price before work.

What changes the cost of a furnace repair
FactorHow it affects the price
Which part failedCleaning a flame sensor is quick. An inducer, ECM motor or control board takes more parts and time.
Brand and modelPremium modulating furnaces often use model-specific boards and motors.
AccessA furnace boxed into a finished closet or under a stairwell takes longer to work on.
Related faultsA blocked return or undersized duct may need attention too, or the new part fails again.

The price you approve is the price you pay for that repair, start to finish.

Furnace brands we repair in North York basements

We repair all the major brands found in North York basements, including Carrier, Lennox, Goodman, Trane, York, Rheem, Napoleon, Daikin, Amana and Bryant. A builder-grade furnace in a Downsview bungalow gets the same careful diagnosis as a modulating unit in a Lansing rebuild, and the same flat price agreed before any work.

Gas smells, CO alarms and when not to repair

Some furnace problems are safety problems first. If you smell gas, leave the house without touching switches, lighting a match or using your phone, then call Enbridge Gas’s emergency line, 1-866-763-5427, from the sidewalk. If a carbon monoxide alarm goes off, get everyone, pets included, outside and call 911. Once the home is cleared, we’ll deal with the furnace.

Under Ontario’s Fire Code, a home with a fuel-burning appliance such as a gas furnace, a fireplace or an attached garage needs working CO alarms next to each sleeping area and, since January 1, 2026, on every storey; the province’s carbon monoxide safety guide (opens in a new tab) has the details. Some North York houses now have a basement suite, so test the alarms on every level. We won’t restart a furnace with a cracked heat exchanger, a blocked flue or a gas leak, and all gas work is done by G2 or G1 technicians certified under the TSSA (opens in a new tab).

No heat in a North York home after hours

If the furnace quits at 2 a.m. in January, you don’t have to wait for morning. No-heat calls from North York are answered 24/7 and moved to the front of the line, and a technician comes out that night. Our page on emergency furnace repair covers what to do while you wait.

Serving every North York neighbourhood

We provide furnace repair in North York from Newtonbrook and Willowdale along Yonge Street to Downsview in the west and Parkwoods and Victoria Village in the east, with Bedford Park, Lansing and Armour Heights in between. We also fix furnaces in Vaughan, Markham, Richmond Hill and Toronto.

FAQ

Furnace repair questions from North York homeowners

Why is my furnace blowing cold air between cycles?

Look at the thermostat first. With the fan set to On, the blower keeps running after the burners stop, and the air feels cool. If the fan is on Auto and nothing warm ever comes out, the flame isn’t catching or holding. In older North York bungalows that’s often an overheating furnace tripping its limit switch, a worn igniter or a coated flame sensor.

Is a burning smell from the furnace normal?

A dusty smell for the first few hours of the season is normal, as dust on the heat exchanger burns off. A smell that lasts past the first day, or any sharp electrical or plastic odour, isn’t. Turn the furnace off at its service switch and book a repair. If it smells like gas instead, skip the switch: leave without touching any switches or flames and call Enbridge Gas at 1-866-763-5427 from outside.

Can you repair a furnace boxed into a finished basement closet?

Yes. Many finished North York basements put the furnace in a small room, and we’re used to working in them. If the furnace sits behind a narrow door or under a stairwell, mention it when you book so the technician arrives ready to protect the space around it.

Is it worth repairing a furnace that’s nearly 20 years old?

It depends on the part. A flame sensor, igniter or capacitor on an old furnace is usually a sensible fix to get through the season. A heat exchanger, control board or blower motor usually isn’t. On a furnace that age we always give you a replacement price next to the repair price.

What does the blinking light on my furnace mean?

Most modern furnaces have a small status light on the control board that blinks a pattern when something goes wrong, such as a pressure switch fault or a failed ignition. The code chart is usually printed on the furnace door or in the owner’s manual, so there’s no need to take a panel off. Jot the pattern down before the power goes off, and tell us when you book.

Do you offer furnace repair in Newtonbrook or Downsview?

Call the North York number on this page or send the request form. We cover every neighbourhood, from Newtonbrook and Bayview Village to Downsview, Don Mills and Bedford Park. Booked repairs get a two-hour arrival window and a text when the technician is on the way, and no-heat calls are answered 24/7.

How do I stop the same part failing again next winter?

Fix the cause, not only the part. A limit switch that keeps tripping usually points to an airflow problem, and a flame sensor that keeps coating up points to dirty combustion air, such as laundry products, sprays or renovation dust near the furnace, or a poor ground. A yearly visit for furnace maintenance in North York catches wear early, and the technician can check your ducts and returns at the same time.

Do you repair modulating and two-stage furnaces?

Yes. Many custom homes in York Mills, Hogg’s Hollow and Bayview Village run modulating or two-stage furnaces with variable-speed blowers, and we repair all major brands. When a part isn’t on the truck, you hear that before approving anything, and we leave the furnace in a safe state until it arrives.

Book a visit

Need furnace repair in North York? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 584-3959

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 584-3959Used only to book your visit. Privacy