Skip to content
Gas furnace and water heater in a home basement
Brands we repair

York furnace repair in Toronto

(647) 692-0819Open 24/7, day or night

If you need York furnace repair because the heat has stopped, the unit short cycles or it won’t start, our technicians can help. This page explains who owns the York name today, what usually goes wrong with a gas furnace, what you can safely check and when an older unit is worth saving. For the full service, see our furnace repair in Toronto page, or book any hour of the day.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Our technicians work on York furnaces across Toronto and the GTA.
  • Check the thermostat, filter, breaker and furnace door switch before you call.
  • Photograph the model and serial label; it tells us what you have.
  • Smell gas? Get out and call Enbridge. CO alarm sounding? Go outside, call 911.
  • Open around the clock, with the price agreed before work starts.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. York furnace repair in Toronto and the GTA
  2. Who owns York now?
  3. What is your York furnace telling you?
  4. Common York furnace repairs
  5. Quick checks you can do first
  6. Finding your York furnace’s model, serial number and age
  7. York furnace flashing red light: what the codes mean
  8. Repair or replace an older York furnace?
  9. Warranty and paperwork for a York furnace
  10. Gas smell and carbon monoxide safety
  11. How a York furnace repair visit works
  12. York furnace repair questions

York furnace repair in Toronto and the GTA

Our TSSA-certified gas technicians repair York gas furnaces in Toronto, North York, Vaughan, Richmond Hill, Markham, Mississauga and Oakville. The price is a flat rate, and you approve it before work begins. Emergency calls are answered 24/7, and technicians go out day or night when the heat is off.

Being independent, we can repair a York furnace no matter who installed it, including one that came with the house.

Who owns York now?

York has been a Johnson Controls brand since August 2005. A 2025 trade report says Bosch completed its purchase of Johnson Controls’ residential and light commercial HVAC business on July 31, 2025, and that Bosch acquired long-term licences to use the York and Hitachi brand names.

Johnson Controls’ 2024 announcement said that business would carry on under York, Hitachi, Coleman, Champion, Luxaire and other names. That makes York, Luxaire and Coleman sister brands of one business. We never assume two brands share parts, so we check the model in front of us.

What is your York furnace telling you?

Most furnace faults show up as one of a few symptoms, and the symptom points to a short list of causes. The table below is general gas furnace guidance, since York’s own series names are not something we can list here. Your model and age decide which parts apply.

Common furnace symptoms, likely causes and who fixes them
SymptomLikely causeWho fixes it
Blank thermostat or no responseDead batteries, tripped breaker or open door switchYou first, then us
Starts, then shuts off within minutesDirty flame sensor, overheating or a blocked ventTechnician
Clicking but no flameFailed igniter, gas valve or control boardTechnician
Blower runs, air stays coolIgnition lockout or a tripped limit switchTechnician
Loud squeal or rattleWorn blower or inducer motor bearingsTechnician
Water around the baseBlocked condensate trap or drain lineYou (clear the drain), then us

Common York furnace repairs

The parts that fail most on a gas furnace are small, and most can be replaced in one visit. Which ones your York has depends on its age and model, so we confirm on site before we quote.

  • Flame sensor cleaning or replacement, the usual cause of a furnace that lights and then quits.
  • Hot surface igniter replacement when the furnace clicks and glows but never lights.
  • Inducer motor and pressure switch faults that stop a furnace before it fires.
  • Limit switch replacement after overheating, plus the airflow problem behind it.
  • Blower and ECM motor repair when air is weak or noisy.
  • Control board replacement, and condensate trap and drain cleaning on high-efficiency units.

Quick checks you can do first

A few checks take about five minutes and sometimes bring the heat back, so they are worth doing before you book a visit. Stop the moment you are unsure of anything, and never touch gas lines or wiring.

  • Set the thermostat to Heat, a few degrees above room temperature, and replace its batteries.
  • Check the furnace service switch and the breaker for the furnace.
  • Replace a clogged filter, and make sure the furnace door is fully seated.
  • Clear snow or ice from outdoor intake and exhaust pipes by hand.
  • Try a single reset. If it locks out again, a safety control has tripped for a reason.

Finding your York furnace’s model, serial number and age

The rating plate is a label on the furnace itself, and it carries the model and serial numbers a technician needs. Photograph it before you call if you can reach it safely without taking anything apart.

We don’t work out a furnace’s age from the name alone. The plate, your installation paperwork and what we find on site give the full picture. For a Y91E, the flash codes are in the next section; for other York models, the list is in that furnace’s manual and the technician reads it on site.

York furnace flashing red light: what the codes mean

York’s Y91E furnaces report faults with an LED on the control board that can flash red, green or amber, and York’s user manual places it behind a clear view port in the blower compartment door. A slow green flash means standby and a slow amber flash means a normal call for heat. Red flashes come in counted groups with a 2 second pause between them.

The meanings below are from York’s Y91E installation manual (opens in a new tab), 6125049-UIM-C-0624, June 2024, for the Y91E single-stage condensing furnace. Other York models have their own lists. A flash code tells you where testing starts, not which part to buy.

Y91E flash codes from York’s installation manual
CodeWhat it meansWhat to do
1 red flashFlame sensed when there was no call for heatCall a technician right away
2 red flashesPressure switch closed when it should be open, so ignition will not continueBook a repair
3 red flashesPressure switch contacts open when they should be closedBook a repair
4 red flashesMain limit switch has opened; York lists a dirty filter first among the causesReplace a dirty filter, then call a technician
5 red flashesRollout switch opened, or the limit has been open over 15 minutes; hard lockoutCall a technician
6 red flashesPressure switch opened five times in one call for heat; 1-hour lockoutBook a repair
7 red flashesNo flame after three ignition trials; 1-hour lockoutBook a repair
8 red flashesFlame lost five times in one heating cycle; 1-hour lockoutBook a repair
9 red flashesReversed line voltage polarity, a grounding problem or reversed transformer wiresBook a repair
10 red flashesGas valve energized with no call for heatCall a technician right away
11 red flashesMain limit open more than 5 minutes, usually a failed blower motor or wheelCall a technician
Rapid amber flashLow flame signal warningBook a repair
Steady on, any colourPossible control failureBook a repair

Count the flashes twice before you call and note what the furnace was doing. Our TSSA-certified gas technicians can read the last five stored codes from the control, and they test the part a code points to before replacing anything.

Repair or replace an older York furnace?

A gas furnace typically lasts 15 to 20 years, so age is the first thing we weigh against the size of the repair. A furnace in its teens with a failed igniter is a fair repair. One near 20 with a cracked heat exchanger usually is not.

How age and fault type usually steer the decision
Furnace ageSmall repair (sensor, igniter)Major repair (heat exchanger, board and motor together)
Under 10 yearsRepairUsually repair
10 to 15 yearsRepairCompare against replacement
15 to 20 yearsUsually repairReplacement often makes more sense
Over 20 yearsRepair only if minor and safeReplace

If replacement is closer, our guide on how to repair or replace a furnace sets out how we weigh it.

Warranty and paperwork for a York furnace

Check your installation papers and the maker’s Canadian warranty page before you assume anything is covered. The York name and the company behind it have changed hands recently, so it is worth confirming who answers warranty questions today.

Keep your service records too, since many warranties ask for proof of regular maintenance. We do not do warranty work on any maker’s behalf, but we can document what we find.

Gas smell and carbon monoxide safety

If you smell gas, leave the house at once and call Enbridge Gas at 1-866-763-5427 from outside. Do not flip switches, light anything or use your phone indoors, and do not go back in until Enbridge says it is safe.

If a carbon monoxide alarm sounds, get everyone outside and call 911. Ontario law has required CO alarms on every storey since January 1, 2026, on top of one next to each sleeping area, wherever a home has a fuel-burning appliance, a fireplace or an attached garage, and the Ontario CO safety page (opens in a new tab) explains where they belong.

How a York furnace repair visit works

Booked visits come with a two-hour arrival window and a text as we head over. The technician tests the furnace, explains the fault in plain terms and quotes a flat rate. The repair waits for your yes.

Middle of the night? Call anyway. We never close, and emergency calls go to the front of the line. North of the city, we also cover furnace repair in Vaughan.

Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by York. Brand names are trademarks of their owners.

FAQ

York furnace repair questions

Do you repair York furnaces in Toronto?

Yes, we repair York gas furnaces throughout Toronto and the GTA, including North York, Vaughan, Richmond Hill, Markham, Mississauga and Oakville. Who installed the unit does not matter to us, and you approve our flat-rate price before any repair starts.

Who owns York furnaces now?

A 2025 trade report says Bosch completed its purchase of Johnson Controls’ residential and light commercial HVAC business on July 31, 2025, with long-term licences to use the York name. For service questions, we look at the model plate on your furnace rather than relying on the brand name alone.

Why does my York furnace keep shutting off?

A furnace that lights and then quits is usually protecting itself. Typical causes include a coated flame sensor, a filter so clogged the unit overheats, or blocked intake and exhaust pipes. Try a fresh filter and clear any snow from the pipes. If it keeps happening, a technician should find the cause.

Can I reset my York furnace myself?

You can try one reset: switch the furnace off at the service switch, wait about a minute and switch it back on. If it locks out again, stop. Repeated lockouts mean a safety control has found a problem, and forcing restarts can hide something that needs a gas technician.

What does a York furnace flashing red light mean?

Rapid red flashes mean the furnace has found a fault. Count the flashes in one group: on York’s Y91E, 3 red flashes means the pressure switch is open when it should be closed, and 4 means the main limit switch has opened, with a dirty filter among the listed causes. Check the filter, then call us if it repeats.

How old is my York furnace?

The model and serial label on the furnace, together with your installation paperwork, is how we estimate age. We do not guess from the brand name. Send us a photo of the label if you can reach it safely, and we will read it on site and tell you what it means for repair or replacement.

Is my York furnace worth repairing?

Age and the type of fault decide it. Gas furnaces typically last 15 to 20 years, so a small repair on a younger unit is usually worthwhile. A cracked heat exchanger or several failures at once on an older unit often points to replacement. We explain both options before you decide.

Book a visit

Need York furnace repair? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy