Skip to content
Gas furnace and water heater in a home basement
Brands we repair

Luxaire furnace repair in Toronto

(647) 692-0819Open 24/7, day or night

Luxaire furnace repair starts with knowing which kind of furnace you have, because single-stage, two-stage and modulating units fail in different ways. This page covers what Luxaire’s own model list tells a technician, the repairs we see most, and what you can check safely. For the wider service, see furnace repair in Toronto.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Our technicians work on Luxaire furnaces across Toronto and the GTA.
  • Stage and efficiency decide which parts can fail, so we start from your model.
  • Check the thermostat, filter, breaker and door switch before booking.
  • Gas smell means leave and call Enbridge. A CO alarm means everyone out, call 911.
  • We never close, and you approve a flat-rate price before work begins.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Luxaire furnace repair in Toronto and the GTA
  2. Who makes Luxaire furnaces?
  3. What Luxaire’s model list tells a technician
  4. Is your Luxaire furnace condensing? Why it changes the checks
  5. Variable-speed blowers and zoning on Luxaire models
  6. Common Luxaire furnace repairs
  7. Checks to make before booking a visit
  8. Reading your Luxaire model and fault codes
  9. Luxaire furnace blinking light codes
  10. Repair or replace a Luxaire furnace?
  11. Warranty and paperwork
  12. Safety and booking a Luxaire furnace repair visit
  13. Luxaire furnace repair questions

Luxaire furnace repair in Toronto and the GTA

Our technicians work on Luxaire gas furnaces in Toronto, North York, Richmond Hill, Markham and the rest of the GTA. Gas work is done by TSSA-certified technicians, and the price is a flat rate you approve before anything starts. Emergency calls are answered 24/7.

Who makes Luxaire furnaces?

Luxaire’s furnace page carries the footer “JC Residential and Light Commercial LLC”, and Johnson Controls’ 2024 announcement of the sale of its residential business to Bosch lists Luxaire among that business’s brands. The same announcement names York and Coleman, so those are sister brands.

Sister brand does not mean identical furnace. We do not assume Luxaire and York share parts, so the model on your plate is what we work from.

What Luxaire’s model list tells a technician

Luxaire’s website lists furnaces from 80% AFUE up to a modulating model at up to 98%, and the stage and blower type change what we test first. These figures are Luxaire’s own. The page does not say which models are sold in Canada, so we confirm yours on site.

Furnace types Luxaire’s site lists, and what each means on a repair call
Type (per Luxaire)Efficiency statedWhat we pay attention to
Single-stage, such as the Z9ES96% AFUEIgnition parts, pressure switch, condensate drain
Two-stage, such as the TM9Y and Z9ET96% and 97% AFUETwo-stage gas valve and control board
Two-stage, variable-speed, such as the Z9VT97% AFUEBlower motor and its control signals
Modulating, such as the LP9CUp to 98% AFUEModulating gas valve, sensors, blower speed
80% AFUE models80% AFUEMetal flue, draft and heat exchanger condition

Is your Luxaire furnace condensing? Why it changes the checks

A 90%+ AFUE furnace condenses its exhaust and drains water, while an 80% unit vents hot gas through a metal flue. That one difference changes the common faults, so the first thing we establish is which kind you have.

On a condensing furnace, plastic vent pipes outside can freeze over and a blocked condensate trap can stop the burner. On an 80% unit, we look harder at the flue, draft and heat exchanger.

Variable-speed blowers and zoning on Luxaire models

Luxaire lists a modulating 80% AFUE model with a variable-speed ECM fan motor that works with its Hx3 Communicating Zoning System. A furnace like that has more to check than a basic one, because the blower and controls exchange signals.

If your home has zoned heating, tell us which rooms are affected. A zone that stays cold while the furnace runs points to a different problem than a furnace that will not start at all.

Common Luxaire furnace repairs

Most calls come down to a small set of parts that wear out on any gas furnace. Which ones apply depends on your model and its age, and we confirm that on site.

  • Flame sensor cleaning when the burner lights for a few seconds and quits.
  • Hot surface igniter replacement on units that glow but do not light.
  • Inducer motor or pressure switch faults that keep the burner from firing.
  • Limit switch trips from restricted airflow, with the cause fixed too.
  • Blower or ECM motor repair for weak airflow or noise.
  • Control board replacement and condensate trap cleaning.

Checks to make before booking a visit

Five minutes of checking can sometimes save a service call, and none of it needs tools or opening the furnace. Stop straight away if anything seems unsafe or unclear, and call us instead.

  • Thermostat set to Heat with fresh batteries.
  • Furnace service switch on and the breaker not tripped.
  • Filter clean, and furnace door fully closed.
  • Outdoor vent pipes clear of snow and ice, cleared by hand.
  • Note any blinking light or display message, and photograph it for the technician.

Reading your Luxaire model and fault codes

The model and serial label on the furnace tells a technician exactly what you have, and a photo of it saves time. If the label says TM9Y, the blink codes in the next section apply.

For other Luxaire models, the code list is in that furnace’s own manual, and the technician reads the light on site against it.

Luxaire furnace blinking light codes

The control board in a Luxaire TM9Y talks through one small light. Green blinking slowly is normal with no call from the thermostat, and amber blinking slowly is normal heating. A problem shows as red blinks in a repeating group, each group followed by a 2 second gap, and the number of blinks in a group is the code.

This list is from the TM9Y installation manual (opens in a new tab) published by Johnson Controls Ducted Systems, 5750144-UIM-H-0423, April 2023, for the TM9Y two-stage furnace that Luxaire lists. Other Luxaire models can differ. A code says what to test, not what to replace.

TM9Y blink codes and their meaning, from the installation manual
CodeWhat it meansWhat to do
1 red flashThe control saw flame without a call for heatCall a technician right away
2 red flashesPressure switch contacts already closed at the start of a cycle, so ignition stopsBook a repair
3 red flashesPressure switch contacts open when they ought to be closedBook a repair
4 red flashesMain limit opened; a dirty filter is one listed causeSwap a dirty filter, then call a technician
5 red flashesRollout switch opened, or the limit stayed open over 15 minutesCall a technician
6 red flashesPressure switch opened four times during one call for heatBook a repair
7 red flashesThree ignition trials passed without a flameBook a repair
8 red flashesFlame lost five times in a heating cycleBook a repair
9 red flashesPolarity, grounding or low voltage transformer wiring problemBook a repair
10 red flashesGas valve powered without a heat callCall a technician right away
11 red flashesLimit open more than 5 minutes, usually a failed blower motor or wheelCall a technician
13 red flashesSecond-stage pressure switch open during a call for high fireBook a repair
Continuous amber flashFlame sense current below 0.35 micro ampsBook a repair

Count the blinks across two groups to be sure, and note whether the furnace was starting or already heating. Our TSSA-certified gas technicians read the light, recall the five stored faults and test the part the code names before any replacement.

Repair or replace a Luxaire furnace?

A gas furnace typically lasts 15 to 20 years, so the repair-or-replace question depends on age, fault and efficiency. A newer condensing unit with a failed sensor is worth repairing. An old 80% unit with a damaged heat exchanger usually is not.

How we weigh a repair against replacement
SituationUsual advice
Under 15 years, one failed partRepair
15 to 20 years, repeated faultsCompare repair and replacement
Cracked heat exchanger at any ageReplace, for safety
80% unit near or past 20 yearsReplacement is worth pricing

Warranty and paperwork

Warranty terms for Luxaire are not something we can state, so check the maker’s Canadian warranty page and your installation papers. Keep service records, since many warranties ask for proof of regular maintenance.

A maintenance plan creates that record each year. We do not perform warranty work on any maker’s behalf.

Safety and booking a Luxaire furnace repair visit

If you smell gas, leave the house and call Enbridge Gas at 1-866-763-5427 from outside. If a carbon monoxide alarm sounds, get everyone out and call 911. The Luxaire furnace page (opens in a new tab) lists the maker’s current models.

For everything else, book a visit with a two-hour arrival window and a text when we are on the way. Homes in Oakville and Mississauga get the same service as Toronto ones, day or night.

Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Luxaire. Brand names are trademarks of their owners.

FAQ

Luxaire furnace repair questions

Do you repair Luxaire furnaces in Toronto?

Yes. Our technicians work on Luxaire gas furnaces across Toronto and the GTA, from single-stage units to modulating ones. We are an independent contractor, so any Luxaire furnace in your home is fair game, and you approve a flat-rate price before any repair begins.

Are Luxaire and York the same company?

Johnson Controls’ 2024 announcement lists Luxaire, York and Coleman among the brands of its residential business, which it sold to Bosch. That makes them sister brands. We do not assume they share parts, so we identify each furnace by its own model label.

Does a modulating furnace cost more to repair?

It can, because there is more to diagnose: a modulating gas valve, extra sensors and a variable-speed blower. Simple faults such as a dirty flame sensor cost the same to clear either way. We quote a flat rate once we know the fault, and you approve it first.

Why does my Luxaire furnace blow cold air?

Usually the burner has shut down and the blower is still running. Causes include a dirty flame sensor, a tripped limit switch or an ignition fault. Check the filter and thermostat settings first. If the burner will not stay lit, a gas technician needs to find out why.

What does a Luxaire furnace blinking light mean?

Slow green or slow amber blinking is normal. Red blinks in a counted group mean a fault: on the TM9Y, the installation manual lists 3 red flashes as the pressure switch open when it should be closed and 7 as no flame after three ignition trials. Check the filter and thermostat, then call us if it returns.

Where is the model number on a Luxaire furnace?

Furnaces carry a rating label with model and serial numbers, and the owner’s manual shows where yours sits. We cannot give a Luxaire-specific location, so if you cannot find it, we read it on site. Please do not remove covers yourself to look.

Is a Luxaire furnace worth repairing at 15 years old?

Often, yes, if the fault is a single part and the heat exchanger is sound. Gas furnaces typically last 15 to 20 years, so we compare repair cost with the remaining life. If several parts are failing, we lay out replacement as an option too.

Book a visit

Need Luxaire furnace repair? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy