Skip to content
Gas furnace and water heater in a home basement
Brands we repair

Carrier furnace repair in Toronto

(647) 692-0819Open 24/7, day or night

Carrier furnace repair is something we do every winter across Toronto and the GTA. Our technicians work on Carrier furnaces of every line, from single-stage units to modulating Infinity models, and we’re an independent contractor. This page covers what to check first and what usually fails. For the general process, see furnace repair in Toronto.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Carrier Canada lists Infinity, Performance and Comfort furnace lines, and each repairs a little differently.
  • Check the thermostat, filter, breaker and furnace door before calling. Try only one reset.
  • Gas smell: leave, then call Enbridge Gas from outside. CO alarm: everyone out, call 911.
  • Open 24/7, and you approve a flat-rate price before any repair starts.
  • Our technicians work on Carrier furnaces and are TSSA-certified gas technicians.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Carrier in brief: who makes it and its sister brands
  2. Infinity, Performance and Comfort: what changes on a repair call
  3. Carrier furnace repair on modulating and variable-speed models
  4. Carrier furnace repair: the common jobs
  5. Carrier furnace troubleshooting you can do safely
  6. Finding the rating plate and model number
  7. Carrier furnace codes: what code 33 and the others mean
  8. Warranty and registration on a Carrier furnace
  9. When Carrier furnace repair makes sense and when to replace
  10. Gas smell, CO alarm and a Carrier furnace that won’t stop
  11. What a Carrier furnace visit looks like in the GTA
  12. Carrier furnace repair questions

Carrier in brief: who makes it and its sister brands

Carrier is part of Carrier Global, and Carrier Global’s brands also include Bryant, Tempstar and KeepRite. That makes those three sister brands of Carrier under one parent company. We don’t claim they share factories or parts, so each one is diagnosed from the unit in front of us.

Carrier Canada (opens in a new tab) lists three furnace lines: Infinity, Performance and Comfort. We also see older units from lines the maker no longer markets.

Infinity, Performance and Comfort: what changes on a repair call

The line on your furnace decides which parts we expect to test. Carrier’s Canadian furnace page lists Infinity models with modulating or two-stage gas valves and variable-speed blowers, Performance models as two-stage or single-stage, and Comfort as single-stage.

Carrier Canada’s furnace lines as the maker describes them, and what each means for a repair
LineWhat Carrier listsWhat it means on our visit
InfinityUp to 98.5% AFUE (98), 96.7% (96) and 97.0% (97); modulating or two-stage; variable-speed blowerMore sensors and controls to test, and a system control may sit on the wall
PerformanceTwo-stage or single-stage, with a variable 25-speed blowerStaged gas valve and ECM blower motor checks, plus the usual ignition and venting tests
ComfortSingle-stage, with a multi 18-speed blowerA simpler start-up sequence, so faults are often quicker to isolate

Carrier marks these as 90%+ models, up to 96.7% to 97% AFUE for Performance and Comfort. Any of them may have the plastic intake and exhaust pipes that need clearing of snow in January.

Carrier furnace repair on modulating and variable-speed models

Modulating and variable-speed Carrier furnaces fail in the same places as simpler ones, but the symptoms can look different, and the cause of weak heat can be a control rather than a part.

Carrier says the Infinity 98 modulating gas valve moves in steps of about 1% between 40% and 100% capacity when run by the Infinity control, under the name Greenspeed. That is why a Carrier Infinity furnace repair starts with how the furnace and its system control are talking, and not only with the burners.

  • A blower that ramps up and down slowly is normal on a variable-speed motor. A blower that hunts, hums or stops mid-cycle is not.
  • Carrier says humidity control on the Infinity 98 needs an Infinity system control plus an Infinity air conditioner or heat pump.
  • If a smart thermostat was swapped in later, tell us. Mismatched controls are a common reason a furnace seems to ignore the thermostat.

Carrier furnace repair: the common jobs

Most Carrier furnace problems come back to a short list of parts: ignition, airflow, the safety switches and the condensate system. We test in order, from the thermostat call to the exhaust, so we replace what has failed rather than what is nearby.

  • Hot surface igniter or flame sensor: the furnace tries to start, then shuts off after a few seconds.
  • Inducer motor and pressure switch: the small fan runs or starts, but burners never light.
  • Limit switch: the furnace overheats and stops, often from restricted airflow.
  • Blower motor, ECM module or capacitor: warm air at the furnace but weak or no air at the vents.
  • Control board: erratic behaviour, repeated lockouts, or no response to a good thermostat signal.
  • Condensate trap and drain: a clogged line that trips the pressure switch on a high-efficiency model.

Carrier furnace troubleshooting you can do safely

A few checks take five minutes and need no tools. Start with the thermostat on Heat and a temperature above the room reading, then the furnace switch and the breaker. A switch that looks like a light switch usually sits on or near the furnace.

  • Replace a dirty filter. A clogged one is the most common reason a furnace overheats and cuts out.
  • Close the front door fully. The door switch cuts power if it isn’t seated.
  • Clear snow or ice from the outdoor intake and exhaust pipes by hand, on high-efficiency furnaces.
  • Open supply registers and clear return grilles in rooms that run cold.
  • Try one reset only. If the furnace locks out again, a safety control is doing its job. Call us.

Don’t open the burner compartment, bypass a switch or hold the gas valve open. Those jobs belong to a licensed gas technician.

Finding the rating plate and model number

Carrier’s owner FAQ (a US site) says the rating plate on a furnace sits inside the front door panel. On an air conditioner or heat pump it is on the back, near the service valve connections. Taking a clear photo of the plate helps us bring the right parts.

Carrier furnace codes: what code 33 and the others mean

On the Carrier 59SC6A, the Comfort 96 single-stage furnace, the status light behind the sight glass in the blower door flashes a two-digit code: short flashes for the first digit, long flashes for the second. The board’s display adds a third digit, as in 33.1. The meanings below come from Carrier’s 59SC6A installation instructions (opens in a new tab), pages 58 and 76.

Carrier’s owner’s manual says to record the code before taking off the blower door or switching off power. Other Carrier models can use a different list, so check the label inside your own door.

Carrier 59SC6A codes only, copied from Fig. 61 of the installation instructions
CodeWhat it meansWhat to do
Rapid flash (10.1)Incoming 115 volt power has its polarity reversed, so the furnace will not runBook a repair
13 (13.1)Limit lockout: a switch in the main limit circuit stayed open over 3 minutes; it resets itself after 3 hoursCall a technician
14 (14.1)Ignition lockout after 4 tries in a row; it resets itself after 3 hoursMake sure the gas shut-off valve to the furnace is open, then book a repair
24 (24.1)Blown fuse from a short in the 24 volt wiring, thermostat wires includedBook a repair
31 (31.2)Secondary pressure switch open; wind, a restricted vent or a blocked condensate drain are listed causesCheck the outdoor vent termination for snow or debris, then book a repair
32 (32.1)Main pressure switch open; the inducer rests 15 minutes before it retriesClear the outdoor vent pipes by hand; book a repair if it returns
33 (33.1)A switch opened in the main limit circuit, the limit or flame rollout, often linked to a dirty filter or restricted ductsReplace a dirty filter, then call a technician
34 (34.1)No flame proved during four ignition trialsBook a repair
46 (46.1)A brief loss of power; heating restarts once power is steadyNo action needed; book a repair if it keeps coming back

The board keeps its last seven faults even after a power cut. Our TSSA-certified gas technicians read that history on site, then test the switch or part the code points to before anything is replaced.

Warranty and registration on a Carrier furnace

Warranty terms depend on the model, the install date and whether the unit was registered, so we don’t quote lengths. Check Carrier Canada’s warranty page and your install paperwork. Many manufacturer warranties ask for proof of regular maintenance, which our maintenance plan covers with two tune-ups a year.

Keep your invoices and a photo of the rating plate. Our own repairs carry a written workmanship warranty.

When Carrier furnace repair makes sense and when to replace

Repair usually makes sense for a furnace under 15 years old with one failed part. Past 15 to 20 years, or after a cracked heat exchanger, replacement is the better path. We give the repair price first and you decide.

Repair or replace a gas furnace
SituationUsuallyWhy
Under 15 years, one failed partRepairA single part is a small share of a new furnace
Repairs every seasonReplaceRepeat failures point to wider wear
Cracked heat exchangerReplaceA safety problem that does not repair well
15 to 20 years, major part failedCompare bothGas furnaces typically last 15 to 20 years

Gas smell, CO alarm and a Carrier furnace that won’t stop

If you smell gas, leave the house and call Enbridge Gas at 1-866-763-5427 from outside. If a carbon monoxide alarm sounds, get everyone out and call 911. Ontario requires CO alarms beside each sleeping area and, since January 1, 2026, on every storey of a home with a fuel-burning appliance such as a gas furnace, a fireplace or an attached garage.

Don’t restart a furnace that triggered either alarm until a technician has checked it.

What a Carrier furnace visit looks like in the GTA

We book a two-hour arrival window and send a text. The technician tests the furnace, explains the fault, and gives a flat-rate price that you approve before any work begins. We work in Toronto, North York, Vaughan, Richmond Hill, Markham, Mississauga and Oakville.

No heat at night or on a weekend is an emergency. We’re open 24/7 and technicians go out day or night. For a local page, see furnace repair in Vaughan.

Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Carrier. Brand names are trademarks of their owners.

FAQ

Carrier furnace repair questions

Are Carrier and Bryant furnaces the same?

They are sister brands under Carrier Global. That does not mean they share parts or a factory, and we don’t assume it. Each furnace is diagnosed from its own rating plate and condition, and we confirm any replacement part against the unit before ordering.

Why is my Carrier furnace not heating?

Common causes are a dirty filter, a tripped switch, a failed igniter or flame sensor, a pressure switch blocked by a clogged drain or snow on the vent pipes, or a control fault. Try the checks above and one reset. If it still won’t heat, call us and we will diagnose it.

Do you work on Carrier Infinity furnaces?

Yes. Our technicians work on Carrier furnaces across the Infinity, Performance and Comfort lines, including modulating and variable-speed models. We are an independent contractor, not affiliated with Carrier. We test the furnace and its control together, because on Infinity units the two work as a system.

Can I use any thermostat with a Carrier Infinity furnace?

Carrier says the Infinity 98 pairs with an Infinity system control, and Carrier Canada also lists an ecobee and a Carrier Smart Thermostat. Compatibility depends on the model and the furnace’s wiring. Ask us before you buy a thermostat, and we will check what your unit supports.

Where is the model number on my Carrier furnace?

Carrier’s owner FAQ says the rating plate is inside the front door panel of the furnace. We suggest asking your technician to photograph it during a visit. Keep that photo with your paperwork, since the model and serial numbers are what we use to match parts.

Is the blower running but the air is cold?

That can be a failed igniter or flame sensor, a limit switch that stopped the burners, a gas valve problem, or a thermostat set to fan only. Check the thermostat first. If the furnace is on Auto and the air stays cold, turn it off and call us for a repair.

What does a Carrier furnace flashing light mean?

On a 59SC6A, the light flashes a two-digit code through the sight glass: short flashes, then long ones. Code 33 means a switch in the main limit circuit opened, often from a dirty filter, and code 14 is an ignition lockout. The table above lists the rest; other Carrier models have their own label inside the door.

How much does Carrier furnace repair cost?

It depends on the part and the model, so we give a flat-rate price after diagnosing the furnace and before any work. Parts like igniters and sensors are usually smaller jobs than motors or control boards. You approve the price first.

Book a visit

Need Carrier furnace repair? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy