Skip to content
Technician testing an HVAC unit with gauges
Homeowner guides

Furnace making noise: what each sound means

(647) 692-0819Open 24/7, day or night

A furnace making noise is telling you something, and the type of sound and when it happens usually narrow down the cause. Some sounds are part of a normal heating cycle. Others point to a worn motor, a loose part, restricted airflow or, in a few cases, a safety problem that means the furnace should be off. This guide walks through each sound, what you can safely check, and when it’s time to book furnace repair with a TSSA-certified gas technician.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Soft clicks, a whoosh at ignition and a steady blower are normal furnace sounds.
  • A boom at start-up, grinding metal or a burning smell means turn it off and call.
  • Whistling often comes from a clogged filter or closed registers, which you can fix yourself.
  • Gas smell: leave and call Enbridge Gas from outside. CO alarm: everyone out, call 911.
  • Note when the sound happens, at start-up, during the run or after shut-off.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Is a furnace making noise always a problem?
  2. Furnace making noise: what each sound points to
  3. A bang or boom when the burners light
  4. Popping and ticking from the ducts
  5. Squealing, screeching or a high whine
  6. Grinding, scraping or rattling inside the cabinet
  7. Humming, buzzing and clicking
  8. Whistling or rushing air at the registers
  9. Gurgling from a high-efficiency furnace in winter
  10. When a furnace making noise should be turned off
  11. What you can check before you call
  12. How a technician fixes a furnace making noise
  13. Furnace making noise: common questions

Is a furnace making noise always a problem?

No. Every furnace makes some sound as it moves through its cycle, and a furnace making noise you’ve heard every winter for years is usually fine. What matters is a new sound, a sound that’s getting louder, or one that comes with less heat, a smell, or the furnace shutting itself down.

  • A click as the thermostat calls for heat and relays switch on
  • A whir from the inducer motor before the burners light
  • A soft whoosh as the burners ignite
  • The blower ramping up, then running briefly after the burners shut off
  • Light ticking from metal ducts as they warm and cool

Furnace making noise: what each sound points to

Matching the sound to its likely cause tells you whether to fix it yourself, book a visit or turn the furnace off now. Timing helps too: start-up noises usually come from the inducer, ignitor or burners, while noises during the run tend to come from the blower motor or ductwork.

Furnace sounds, what they usually mean and what to do
SoundUsually meansWhat to do
Loud bang or boom at start-upDelayed ignitionTurn it off at the service switch and call
Popping or ticking in the wallsDucts expanding, cooling or flexingMention it at your next visit
Squeal or high whineWorn motor bearings or a blower beltBook a repair
Grinding or scraping metalBlower wheel rubbing or failed bearingsTurn it off and call
Rattle or vibrationA loose part, duct or vent pipe hangerBook a repair
Loud hum or buzz with no airflowWeak capacitor, failing motor or relayTurn it off and call
Repeated clicking, no heatIgnition or control problemOne reset, then call
Whistling at the registersRestricted airflowReplace the filter, open registers
GurglingBlocked or frozen condensate drainBook a repair
Hissing with a gas smellPossible gas leakLeave, call Enbridge Gas from outside

A bang or boom when the burners light

A loud bang right as the furnace starts is usually delayed ignition. Gas builds up for a moment before it lights, then catches all at once. Dirty burners, a weak ignitor or gas pressure that’s out of adjustment can cause it, and each hard light-off stresses the heat exchanger, so it shouldn’t keep happening.

Turn the furnace off at the service switch and call. If the house is getting cold, our emergency furnace repair line is open 24/7, with technicians out day or night.

Popping and ticking from the ducts

Popping, ticking or a dull bang from the walls and ceilings, rather than from the furnace itself, usually comes from the ductwork. Thin sheet metal expands as warm air hits it and contracts as it cools, and on long cold-snap cycles that movement gets more noticeable.

A loud pop each time the blower starts or stops is different. It often means a flat duct panel flexing under pressure, sometimes from closed registers or too few returns. A technician can measure the static pressure and stiffen or modify the noisy section.

Squealing, screeching or a high whine

A squeal or high whine almost always comes from a motor. If it starts in the first seconds of a cycle, before the burners light, the inducer motor’s bearings are the likely source. If it starts when the blower comes on, look to the blower motor, or the belt on older belt-driven blowers.

Worn bearings get louder over time and can seize, which leaves you without heat. A technician replaces the belt or the motor, and checks the capacitor that helps the motor start.

Grinding, scraping or rattling inside the cabinet

Grinding or scraping metal is a sound to act on right away. It usually means the blower wheel has come loose and is rubbing its housing, or a motor’s bearings have failed. Running the furnace that way can destroy the motor, so turn it off at the service switch and call.

Rattling is usually less urgent. A loose screw, a duct section, a vent pipe hanger or something caught in the blower can all rattle. Since the source can be inside the cabinet, leave the doors on and let a technician find it.

Humming, buzzing and clicking

A low, steady hum from the transformer is normal. A loud hum or buzz when the blower should start, with little or no air coming out, usually means a weak capacitor or a failing motor. A buzzing relay or loose wiring can sound similar, and electrical faults are always a technician’s job.

One or two clicks at start-up are normal. Clicking that repeats while the furnace tries and fails to light points to an ignition or control problem. If the clicks come with the furnace starting and stopping every few minutes, see our guide to furnace short cycling.

Dry winter air means many GTA homes have a humidifier on the furnace. Its water valve clicks or buzzes as it opens, which is normal. A noisy or leaking one is part of our humidifier and indoor air quality service.

Whistling or rushing air at the registers

Whistling usually means air is being forced through a gap or a restriction. A clogged filter, a filter that doesn’t fit its slot, closed registers or blocked return grilles all make the blower work harder and push air through smaller openings, which whistles. This is one noise you can often fix yourself.

Replace the filter with the size printed on the old frame, open the registers and clear the returns. If the whistle stays, the ducts may be undersized or leaking at a joint, which a technician can check.

Gurgling from a high-efficiency furnace in winter

High-efficiency furnaces produce water as they run, and it drains through a trap and a small hose to a floor drain or pump. A soft trickle is normal. Loud gurgling, especially during a deep freeze, usually means the condensate trap or drain line is partly blocked or freezing.

Water can also collect in a sagging plastic exhaust pipe and gurgle as exhaust pushes through it. If the drain backs up, the pressure switch shuts the furnace down. The trap and drain are technician work, but you can keep the outdoor pipes clear, as our frozen furnace vent pipe guide explains.

When a furnace making noise should be turned off

Most furnace noises can wait for a booked visit, but some mean you should turn the furnace off at its service switch and call: a boom at ignition, grinding metal, a loud buzz with a burning smell, or a rumble that carries on after the burners should be off. A gas smell or a CO alarm comes first.

  • Gas smell or a hiss near the gas line: leave the home right away. Don’t touch light switches, use a match or lighter, or make a call inside. Call Enbridge Gas at 1-866-763-5427 from outside.
  • Carbon monoxide alarm: get everyone, pets included, outside and call 911.
  • Lockouts after a reset: leave it off. A safety control is stopping the furnace on purpose.

Enbridge explains how to recognize a gas leak on its safety page (opens in a new tab).

What you can check before you call

Only a few noises have causes you can fix yourself, mainly whistling from restricted airflow and stop-start noise from blocked vent pipes. Leave the furnace’s doors and covers where they are, and keep your hands off the burners, ignitor, flame sensor, wiring, gas valve and condensate trap. Those are jobs for a gas technician.

  • Filter: swap a dirty one for a clean filter that fits the slot snugly.
  • Registers and returns: open closed registers and clear the return grilles.
  • Thermostat: set to Heat, above room temperature, with working batteries.
  • Outdoor pipes: clear snow, ice and frost from the plastic intake and exhaust by hand or with a soft brush.
  • Power: check the service switch and the furnace breaker.
  • Reset once: turn the service switch off for about 30 seconds, then on. Locks out again? Leave it off.

Before you call, note when the sound happens: at start-up, while the blower runs, or after the furnace shuts off. That timing saves diagnostic time.

How a technician fixes a furnace making noise

A technician listens through a full heating cycle and matches the sound to the stage it happens in, then tests the suspect part instead of guessing. That might mean checking motor bearings and the capacitor, inspecting the burners and ignition, measuring gas pressure, or tracing a rattle to a loose duct or hanger.

Our TSSA-certified gas technicians (G2 and G1) work on all major brands. You approve a flat-rate price before any work, and every repair carries our written workmanship warranty. A fall furnace maintenance visit catches worn bearings and dirty burners before they get loud. If the noisy part is on an older furnace, our guide to repair or replace a furnace can help you decide.

FAQ

Furnace making noise: common questions

Why does my furnace make a loud bang when it starts?

A bang at start-up is usually delayed ignition: gas collects for a moment before it lights, then ignites all at once. Dirty burners, a weak ignitor or incorrect gas pressure are common causes. It stresses the heat exchanger, so turn the furnace off at the service switch and have a gas technician look at it.

Is it normal for a furnace to make noise after it shuts off?

Some is. The blower usually keeps running briefly to push out the last of the heat, and ducts tick as they cool. A rumble that continues after the burners should be off is not normal, because it can mean gas is still burning. Turn the furnace off at the service switch and call.

Why does my furnace squeal when the blower comes on?

A squeal when the blower starts usually points to worn blower motor bearings, or a worn or loose belt on an older belt-driven blower. If the squeal comes earlier, before the burners light, the inducer motor is more likely. Either way, book a repair before the motor seizes and leaves you without heat.

What does a humming or buzzing furnace mean?

A quiet hum from the transformer is normal. A loud hum when the blower should start, with little air at the registers, usually means a failing capacitor or motor. Buzzing can also come from a relay or loose wiring. Electrical faults need a technician, and if you notice a burning smell, turn the furnace off.

Why do my heating ducts pop or bang?

Metal ducts expand when warm air hits them and contract as they cool, which makes popping and ticking. A loud pop every time the blower starts or stops often means a duct panel is flexing under pressure, sometimes from closed registers or too few returns. A technician can measure the pressure and quiet the section.

Can I keep running a noisy furnace?

It depends on the sound. Whistling, light ticking or a mild rattle can usually wait for a booked visit. A boom at ignition, grinding metal, a loud electrical buzz, a burning smell or a rumble after shut-off means turn it off and call. If you smell gas, leave the home and call Enbridge Gas from outside.

Why is my furnace louder in very cold weather?

In a cold snap the furnace runs longer and more often, so worn bearings and loose parts get more chances to be heard, and ducts expand and contract more. Frost on the plastic vent pipes and a freezing condensate drain can add gurgling and stop-start noise. Keep the outdoor pipes clear and book a visit if it continues.

Who can fix a noisy furnace in the GTA?

We repair noisy furnaces across Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville, on all major brands. Booked visits get a two-hour arrival window and a text before the technician arrives, and you approve a flat-rate price before any work. We’re open 24/7 if the furnace has stopped heating.

Book a visit

Still no heat? We’ll call you back to book a technician.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy