Trusted HVAC services in Oakville

Most cooling breakdowns start at the outdoor unit, where capacitors, contactors and fan motors are the usual suspects, followed by refrigerant leaks and clogged drains. A 313A-certified mechanic tests the system under load, finds any leak before adding refrigerant, and gives you a flat price before the repair begins.

Big homes often have two air conditioners, one for the main floor and one for the bedrooms. When the upstairs unit struggles on hot afternoons, the cause is usually airflow, a dirty coil or a low charge rather than size.

Air conditioner installation in Oakville begins with a cooling load calculation; we also check the line set and indoor coil, and match the condenser to the furnace or air handler. Older units may still run on R-22, now out of production, so a heat pump is worth pricing when one of those fails.

Heat pumps suit two very different kinds of home. In newer houses with ductwork, a cold-climate heat pump replaces the central air conditioner and shares the heating with the gas furnace. In older boiler-heated homes near the lake, ductless mini-splits add efficient cooling and shoulder-season heating without any new ductwork.

In a dual-fuel setup the heat pump carries most of the heating and the furnace takes the coldest days. We size it for January, not October, and compare HSPF2 and SEER2 ratings with you.

In a boiler home, the radiators or radiant floors stay in charge of winter heat while the heat pump handles cooling and the milder months.

Eligible heat pumps can earn rebates under the Home Renovation Savings Program, which Save on Energy and Enbridge Gas run together. How much a home can receive depends on the house and its current heating fuel, and we confirm eligibility first. Our heat pump installation page and rebates guide explain more.

Boilers and radiant heat matter here. Some older homes in Old Oakville and Bronte still heat with radiators, and some large custom homes run zoned in-floor radiant heat. We service and replace both, along with water heaters of every type and the equipment that keeps indoor air comfortable.

Boilers, radiators and in-floor heat

We repair circulator pumps, zone and mixing valves, expansion tanks and controls, and replace aging cast iron boilers with condensing or combi models. These work with most existing radiators, and we check piping and venting before quoting.

Water heaters for bigger households

Homes with several bathrooms can outrun a standard tank. A tankless unit, or a combi boiler that heats both the house and the taps, keeps up with back-to-back showers if the gas supply allows. Tanks last about 8 to 12 years, tankless units about 20 with yearly descaling.

Indoor air quality

Big rooms with high ceilings dry out quickly in January. A furnace-mounted humidifier with humidistat control, better filtration and an HRV or ERV in a tight newer home keep every zone comfortable.

When something fails, our HVAC services in Oakville include 24/7 answering for no-heat and no-cooling emergencies, and those calls go to the front of the line. Safety comes first if you smell gas or a CO alarm sounds, and a few quick checks can sometimes solve the problem before we arrive.

• If you smell gas: get everyone out, leave switches alone, and phone Enbridge Gas at 1-866-763-5427 once you’re outside. Their gas safety page (opens in a new tab) explains what happens next.
• If a carbon monoxide alarm sounds: leave and call 911. CO alarms are required in Ontario homes with fuel-burning appliances.
• If the furnace gives no heat: check the thermostat mode and setting, the furnace power switch, the breaker and the filter.
• If the radiators go cold: look at the boiler’s pressure gauge. A reading in the red, or water from the relief valve, means call us now.
• If the AC stops cooling: check the breaker and filter, and if the lines are iced, switch it off to protect the compressor.

Oakville’s houses cover a wide range. Near the lake, the old town, Bronte and Eastlake include older and heritage homes, some still on boilers, while Glen Abbey, River Oaks, West Oak Trails and Joshua Creek are mostly 1980s to 2000s subdivisions of big two-storey houses, most with finished basements.

Parts of the old town are heritage districts, and the Town of Oakville (opens in a new tab) can tell you whether a new condenser, vent or wall unit visible from the street needs approval.

College Park, Falgarwood and Iroquois Ridge date mostly from the 1960s through the 80s, and many homes there have replaced the furnace once or twice but kept the original ducts. Morrison and Eastlake have large estate homes, often with several systems and zoned radiant floors.

Bronte Creek, Palermo and the newer neighbourhoods north of Dundas Street usually have high-efficiency furnaces and HRVs from the start.

The problems we see tend to split along the age of the house: radiators that won’t heat evenly in older lakeside homes, zoning and multi-system faults in large newer homes, and ordinary furnace and AC wear in between. Each is diagnosed, explained and priced flat before work starts.

• Cold radiators: trapped air, a failed circulator pump or a stuck zone valve leaves rooms cold at the top or all over.
• Boiler pressure problems: a waterlogged expansion tank or failing fill valve pushes pressure too high or too low.
• One zone not heating: a bad zone valve, damper motor or thermostat often looks like an equipment failure.
• Upstairs AC can’t keep up: a dirty coil, low refrigerant or poor airflow on the second-floor unit.
• Short cycling: an oversized furnace, a dirty flame sensor or a clogged filter makes the burner start and stop too often.
• Condensate leaks: a clogged drain or failed condensate pump can damage a finished basement.

Repairing makes sense early in a system’s typical lifespan, when the fault is limited to one part. Replacing makes sense near the end of that lifespan, after a major failure such as a cracked heat exchanger or dead compressor, or when repairs have become a yearly event. You get both prices.

In multi-system homes, the units often went in together and age together. We can stagger replacements, one system now and the next when it’s due, so you aren’t replacing everything at once.

What you pay depends on how many systems and zones the home has, the equipment and efficiency you choose, the size of the house, and any venting, piping or electrical work. We look at the house before quoting and give you one flat-rate price for the whole job.

However many systems are involved, our HVAC services in Oakville come with one flat-rate price before work starts. Choosing an HVAC contractor in Oakville? Ask who does the gas work, whether a 313A-certified mechanic handles cooling, and whether the warranty is written.

HVAC maintenance in Oakville means a heating check in the fall and a cooling check in the spring, covering every furnace, boiler and air conditioner in one visit. Our maintenance plan includes two tune-ups a year and priority booking, so no unit gets skipped because it sits in a separate mechanical room.

Furnace visits cover the burners, flame sensor, heat exchanger and safety controls. Boiler visits test the relief valve and expansion tank and check combustion and venting. Cooling visits wash the outdoor coil, measure refrigerant pressures and flush the drain. See the details of our maintenance plan.