Skip to content
Technician servicing a wall-mounted boiler
Assurance HVAC Heating & Cooling of Mississauga

Boiler installation in Mississauga homes

(647) 492-6590Open 24/7, day or night

Assurance HVAC Heating & Cooling of Mississauga does boiler installation in Mississauga for homes that heat with hot water, including some older houses in Streetsville and Port Credit and some custom homes with in-floor heat. A TSSA-certified gas technician sizes the new boiler to your home’s heat loss, handles the piping and venting, and gives you a flat-rate price first. Furnaces and cooling are on our HVAC contractor in Mississauga page.

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 492-6590Used only to book your visit. Privacy

Key takeaways

  • Condensing and combi boilers installed for radiator and radiant floor homes across Mississauga.
  • Sizing follows your home’s heat loss and radiators, not the old boiler’s rating.
  • TSSA-certified gas technicians do the gas, venting and commissioning, with WSIB coverage and insurance.
  • You approve a flat-rate price before work starts, with a written workmanship warranty.
  • Cast iron radiators can stay, and we explain what changes at the chimney.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of Mississauga service team.

On this page
  1. Boiler installation in Mississauga: signs it’s time
  2. Which Mississauga homes heat with a boiler?
  3. Condensing boilers: what 90% AFUE and higher really needs
  4. Combi boiler or heat-only boiler with an indirect tank?
  5. Boiler installation in Mississauga sized to the home, not the old boiler
  6. Near-boiler piping, air separation and the expansion tank
  7. Outdoor reset and controls that make the boiler efficient
  8. Cast iron radiators keep working, and the chimney changes
  9. Radiant floor heating from a new boiler
  10. Older streets in Streetsville and Meadowvale Village
  11. Boiler installation in Mississauga: what installation day looks like
  12. Gas work, permits and carbon monoxide safety
  13. What affects the cost of boiler installation in Mississauga?
  14. Boiler installation questions from Mississauga homeowners

Boiler installation in Mississauga: signs it’s time

A Mississauga boiler is ready for replacement when it is old, leaking from the heat exchanger, locking out repeatedly or needs parts that are no longer available. Any one of these makes a repair less sensible, and two together usually settle it.

Age is a guide, not a rule. A well-kept boiler can run for decades, but older units are less efficient than a modern condensing model and lose more heat up the chimney. A leak from the heat exchanger itself cannot be patched.

For smaller faults, a circulator or a zone valve, our boiler repair in Mississauga page explains what we fix first. When the repair bill, the lockouts and the gas bill all point the same way, we price replacement.

Which Mississauga homes heat with a boiler?

Most Mississauga houses heat with forced air, but some older homes still have hot water radiators and some custom homes use in-floor radiant heat. A boiler also heats additions and basements with in-floor loops in some houses.

Streetsville and Port Credit have older streets where radiator systems can still be found. Some custom homes in the city have radiant floors fed by a boiler.

We look at what your Mississauga house has, not what a typical house has. If you are not sure whether your home heats with a boiler, look for radiators or baseboard pipes, a floor manifold in the basement, or a boiler beside the water heater.

Condensing boilers: what 90% AFUE and higher really needs

A condensing boiler in a Mississauga home reaches 90% AFUE or higher by cooling the exhaust until the water vapour condenses, and it only does that when the system is designed for it. That means low return water temperatures, a condensate drain and plastic venting.

The condensate is mildly acidic, so it runs through a neutralizer before it reaches a drain. Venting is PVC or polypropylene as the maker specifies, usually through a side wall, so the routing outside matters.

If the return water stays too hot, the boiler never condenses and its efficiency falls toward that of an older model. That is why we look at radiator size, water temperature and controls before choosing, not just the box.

Combi boiler or heat-only boiler with an indirect tank?

A combi boiler heats the house and makes domestic hot water on demand in one unit, while a heat-only boiler pairs with an indirect tank that stores hot water. The right choice depends on space, hot water use and the size of the home.

Combi boiler compared with a heat-only boiler and indirect tank
CompareCombi boilerHeat-only boiler with indirect tank
Hot waterOn demand, with flow limited by the unitStored in a tank, ready for several fixtures
SpaceCompact, often replacing a boiler and a water heaterNeeds room for the tank beside the boiler
Best forSmaller households and tight mechanical roomsLarger households and busy mornings
Water heaterCan replace a separate oneTank is fed by the boiler

If you are weighing a separate gas tank, see our water heater installation in Mississauga page for the comparison.

Boiler installation in Mississauga sized to the home, not the old boiler

The right boiler size for a Mississauga house comes from a heat-loss calculation and a look at the radiators or floor loops, not from the old boiler’s rating. Old boilers were often oversized, and homes change after new windows and insulation.

An oversized boiler cycles on and off, wastes fuel and can stop condensing. A boiler that is too small cannot keep up on a cold night. We calculate what the house loses, then check what the radiators can deliver at a given water temperature.

If the radiators are too small for the heat loss at low water temperature, we say so and discuss options such as larger panels or an added loop, instead of oversizing the boiler to compensate.

Near-boiler piping, air separation and the expansion tank

The piping around a Mississauga boiler decides how well it works, so a good installation includes the near-boiler piping, air separation and a correctly sized expansion tank. These parts are small, but they keep flow steady and prevent noise.

Larger or multi-zone systems often use primary and secondary loops, so the boiler sees steady flow while the zones call for heat on their own. A hydraulic separator or a closely spaced tee does that job.

An air separator removes air that causes noise and cold radiators, and the expansion tank absorbs the water’s growth as it heats. We flush the system, add inhibitor where suited and set the pressure before the new boiler runs.

Outdoor reset and controls that make the boiler efficient

Outdoor reset lowers the boiler’s water temperature on mild Mississauga days, which keeps a condensing boiler in its efficient range and the house steady. It is one of the most useful controls in a modern installation.

A sensor outside tells the boiler how cold it is, and the control sets the supply water temperature to match. On a mild day in March the water may be well below its winter peak, and the radiators stay gently warm.

Zone controls and a thermostat for each area finish the system. We show you how to set them up, and we leave the settings written down so you are not left guessing.

Cast iron radiators keep working, and the chimney changes

In Mississauga homes, cast iron radiators can usually stay when a boiler is replaced, because they hold heat well and last for decades. What changes is the venting, since a condensing boiler no longer uses the old chimney in the same way.

Older boilers vent through a masonry chimney. A condensing boiler vents through plastic pipe, often out a side wall, and the old chimney may be left empty or lined for another use, such as a water heater.

We check the chimney and its condition and tell you what the new venting involves. If the radiators have been bled and balanced over the years, we keep what works and fix what does not.

Radiant floor heating from a new boiler

In-floor heat needs lower water temperatures than radiators, so it suits a condensing boiler well, but it needs the right mixing controls. Some custom homes in Mississauga have floor loops in basements or additions.

A mixing valve or a variable-speed injection control keeps the floor loops at a gentle temperature while the boiler runs hotter if it also feeds radiators or a tank. That protects flooring and keeps the system efficient.

We check the manifold, the loops and the pump during the quote. If the system is mixed, with radiators upstairs and floors below, each part gets its own water temperature and its own control.

Older streets in Streetsville and Meadowvale Village

Boiler installation in Mississauga’s older neighbourhoods has some extra steps, because venting a condensing boiler means a pipe through an exterior wall. In the historic cores of Streetsville and Meadowvale Village, check with the City first.

The City of Mississauga (opens in a new tab) is the place to ask about heritage approvals before exterior changes. We plan the vent location with you, so the pipe stays as discreet as the rules and the physics allow.

Older houses also have tight basements and low ceilings. We measure the space for the boiler, the neutralizer and any tank before ordering, and we tell you if a wall-hung model fits better than a floor-standing one.

Boiler installation in Mississauga: what installation day looks like

A boiler replacement in Mississauga usually takes more than a single visit when the piping changes, and we tell you the plan up front. The crew protects floors, shuts off and drains the system, removes the old boiler and sets the new one.

They connect the gas, the venting, the condensate drain and the piping, then fill and purge the system. The boiler is fired, the combustion is analyzed, and each zone is tested for flow and heat.

Before leaving, we show you the controls and the pressure gauge, and what to do if the relief valve discharges. A written workmanship warranty is provided, and you can call us if anything seems off.

Gas work, permits and carbon monoxide safety

Gas appliances in Mississauga and across Ontario must be installed by certified technicians, and our boiler installers are TSSA-certified gas technicians. We handle the permits and inspections the job needs, and the work is WSIB covered and insured.

The TSSA (opens in a new tab) is the regulator for fuel safety. Any Ontario home with an attached garage, a fireplace or a fuel-burning appliance must have CO alarms next to the sleeping areas and, as of January 1, 2026, on every storey, so check yours after the installation. If you smell gas, leave the house at once and call Enbridge Gas at 1-866-763-5427 from outside the building. If an alarm sounds, get everyone outside and call 911.

What affects the cost of boiler installation in Mississauga?

The cost of a new boiler in Mississauga depends on the type of boiler, the condition of the piping and the venting route, so we quote a flat rate after seeing the house. The price you approve is the price you pay.

What changes the price of a boiler installation
FactorHow it affects the job
Boiler typeCombi, heat-only with an indirect tank and larger models differ in cost.
VentingA longer vent run or a masonry chimney change adds work.
PipingNear-boiler piping, loops and zone valves may need replacing.
ControlsOutdoor reset and zone controls add parts and setup time.
Radiators and floorsHeat-loss gaps may call for added emitters or loops.

When you compare quotes, check that each includes the same boiler, venting, piping and controls.

FAQ

Boiler installation questions from Mississauga homeowners

How long does a boiler last before it needs replacing?

A well-kept boiler can last a long time, often for decades, but efficiency, parts availability and leaks matter more than the date. A leak from the heat exchanger or repeated lockouts usually point to replacement. We price a repair and a replacement so you can compare the two.

Will my cast iron radiators work with a replacement boiler?

Usually, yes. Cast iron radiators hold heat well and often outlast the boiler. We check that they can deliver enough heat at the water temperature a condensing boiler needs, and we flush and bleed the system. If some are too small, we discuss options before sizing the boiler.

What is the difference between a combi and a heat-only boiler?

A combi boiler heats the house and makes hot water on demand, so it can replace a separate water heater. A heat-only boiler heats the house and can feed an indirect tank for stored hot water. Combis suit smaller households and tight spaces, while tanks suit busy homes.

Will a condensing boiler work with my old chimney?

Usually not as it did before. A condensing boiler vents through plastic pipe, often out a side wall, because its exhaust is cool and wet. The old chimney may be left or relined for another appliance. We check the chimney and explain the new venting plan before you commit.

Do I need City approval to vent a boiler in Streetsville?

We handle the permits and inspections the job needs. In the historic cores of Streetsville and Meadowvale Village, heritage rules may affect exterior changes, so check with the City of Mississauga about approvals. We plan the vent location with you so it works and stays discreet.

Can a boiler heat my basement floors and my upstairs radiators together?

Yes, with the right controls. Floor loops need lower water temperatures than radiators, so a mixing valve or injection control gives each zone its own supply temperature. We check the manifold, the loops and the pump, and set the controls so both parts work well.

What does outdoor reset do?

Outdoor reset uses a sensor outside to lower the boiler’s water temperature on mild days. That keeps a condensing boiler in its efficient range and holds the house steadily warm. It is a common control in modern boiler installations, and we set it up and show you how it works.

Is a boiler installation covered by a warranty?

Yes. Every installation we do comes with a written workmanship warranty. The boiler itself is covered by its maker’s warranty, which may ask for registration and proof of regular service, so keep your paperwork. We explain both when we give you the flat-rate price.

Book a visit

Need boiler installation in Mississauga? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 492-6590

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 492-6590Used only to book your visit. Privacy