
Boiler leaking water can be a slow drip from a fitting or a sign that the boiler itself is failing, and it is hard to tell which from the puddle alone. Where the water comes from, how fast it appears and what the pressure gauge says all matter. This guide covers the common sources, the safe first steps and the leaks that need a technician now, so you know when to book boiler repair.
Key takeaways
- A leak can come from a valve, pipe joint, pump, relief valve, condensate drain or the boiler body.
- Look, photograph and note the pressure gauge, but don’t touch the boiler’s parts.
- Water near electrical parts, a fast leak or a gauge in the red means call now.
- A leak from the heat exchanger usually means the boiler needs replacing.
- Gas smell or a carbon monoxide alarm comes first. Leave and call.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- First steps when you find a boiler leaking water
- Where a boiler leaking water usually leaks from
- Leaks at radiator valves, joints and pipes
- A leak around the circulator pump
- Boiler leaking water from the relief valve pipe
- Water from a condensing boiler’s drain
- Boiler leaking water from the body or heat exchanger
- Boiler leaks that need a call straight away
- What not to do with a leaking boiler
- Gas and carbon monoxide safety around a leaking boiler
- How a technician finds and fixes the leak
- Boiler leaking water: common questions
First steps when you find a boiler leaking water
When you find a boiler leaking water, stay calm and keep yourself away from the water and the electrical parts. The first job is to see how serious it is, not to fix it. A few minutes of careful looking gives a technician most of what they need.
- Look without touching: where is the water coming from, and is it dripping or running?
- Put a towel and a shallow tray or bucket under a slow drip.
- Read the pressure gauge, and take a photo of it and of the leak.
- Keep children, pets and anything electrical away from the wet floor.
- If water is spraying, pooling fast or reaching the boiler’s controls, call right away.
Hot water can scald, so don’t reach under or behind the boiler while it is running or just after it has been.
Where a boiler leaking water usually leaks from
A leaking boiler has a handful of usual sources, and the location of the water narrows the list quickly. Some of these are small repairs. Others point to a part that is failing or a boiler near the end of its life, which is why it matters to find the true source.
| Where you see water | Usual cause | How serious |
|---|---|---|
| At a radiator valve or pipe joint | A worn seal or loose fitting | Repair soon |
| Around the pump | A worn pump seal or gasket | Repair soon |
| From the relief valve pipe | Pressure too high, or a worn valve | Call now |
| From a small pipe near the bottom, with a condensing boiler | Condensate drain, which carries normal condensation | Check, then call if blocked |
| From the filling valve or fittings | A worn washer or a stuck valve | Repair soon |
| From the body of the boiler | A cracked heat exchanger or a failed joint between cast iron sections | Call now |
Leaks at radiator valves, joints and pipes
The most common leaks are small ones at radiator valves, bleed screws and pipe joints. A valve spindle seal wears with age, a joint loosens as pipes expand and cool, and a seep starts. The water may dry before you see it, leaving a stain or a crust of mineral on the fitting.
A slow drip like this is usually a repair, not an emergency, but it matters because it lets water out of the system and the pressure falls. Our guide to boiler pressure explains why a falling gauge is worth tracking. Don’t tighten fittings with a wrench, since over-tightening can crack them.
A leak around the circulator pump
The circulator pump moves hot water around the loop, and the seals and gaskets on its housing wear out over the years. A leak here shows up as a drip or damp patch right under the pump, sometimes with a rusty or mineral stain on the casing.
Pump seals can’t be fixed with tape or sealant, and the pump sits close to electrical connections. A technician replaces the gasket, the seal or the whole pump after testing the flow. If the leak is steady, switching the heating off and calling is the safe choice.
Boiler leaking water from the relief valve pipe
Water coming from the pipe attached to the relief valve means the valve has opened, or is worn and weeping. The valve opens when pressure climbs too high, so a boiler leaking water from this pipe is a call-now problem. Keep people and pets away, because the water is hot.
Never plug, cap or tie off the valve or its pipe. The valve is the safety device that stops an over-pressured boiler from failing, and blocking it removes that protection. A technician finds out why the pressure rose, which is often a worn expansion tank or a filling valve fault. Our guide to a boiler relief valve leaking goes into the detail.
Water from a condensing boiler’s drain
A high-efficiency condensing boiler makes water as it works, because the exhaust is cooled until the moisture in it turns to liquid. That water leaves through a small plastic condensate pipe to a drain, so some wetness there can be normal. A puddle that grows is not.
A blocked, frozen or disconnected condensate drain can back up and spill. You can look at the pipe for a visible kink or a clear blockage at the end, and see whether water is flowing to the drain. A technician clears it and checks the neutraliser, if the boiler has one.
Boiler leaking water from the body or heat exchanger
Water running from the boiler body, or from inside the cabinet, is the most serious kind of leak. The heat exchanger can crack or corrode, particularly in an older boiler or one that has kettled or run with poor water for years. These leaks seldom stay small.
A cracked heat exchanger usually can’t be repaired in a way that makes sense, so the boiler is replaced. Don’t run the boiler with a leak like this. A gas boiler with a damaged heat exchanger is also a carbon monoxide risk. Our boiler installation page explains a replacement.
Boiler leaks that need a call straight away
Some leaks can wait for a booked visit, and some can’t. Call at once if the water is coming fast, if it reaches the boiler’s electrical parts, if the gauge is in the red or if the relief valve is discharging. These point to an unsafe boiler.
- Water spraying or running steadily, not dripping
- A puddle reaching the boiler’s controls, wiring or a nearby outlet
- A pressure gauge in the red, or a relief valve that is discharging
- Water coming from inside the boiler’s cabinet
- A leak together with a lockout, banging or no heat
We’re open 24/7, and technicians go out day or night for a boiler leak that can’t wait until morning.
What not to do with a leaking boiler
Some well-meant fixes make a leak worse or put you at risk. Boilers combine hot water, gas and electricity, and the safe approach is to look, limit the damage and call. Resist the urge to seal anything, and never run the boiler dry to see if the leak stops.
- Don’t plug, cap or tie off the relief valve or its pipe.
- Don’t open the boiler’s covers or touch its wiring and controls.
- Don’t pour sealant or leak-stop additive into the system.
- Don’t keep topping up a boiler that keeps losing water.
- Don’t use the boiler if the leak is from its body.
Gas and carbon monoxide safety around a leaking boiler
A water leak is bad enough, but gas and carbon monoxide are the risks that can’t wait. At the first smell of gas, get out of the house. Use no switches and no phone inside, and call Enbridge Gas at 1-866-763-5427 once you’re outdoors.
If a carbon monoxide alarm goes off, everyone leaves, pets too, and 911 gets called. Ontario requires a CO alarm next to every sleeping area and, since January 1, 2026, on every storey of a home with a fuel-burning appliance, a fireplace or an attached garage, and Enbridge’s gas safety pages (opens in a new tab) list the signs to know.
How a technician finds and fixes the leak
A technician starts by finding the true source of the water, because it often runs along a pipe before it drips. They check the pressure, test the safety valves and look at the pump, joints, valves and condensate drain, then explain what the repair involves.
You get a flat-rate price to approve before any work begins. Small leaks are often fixed on the visit when the part is on the truck, and repairs carry our written workmanship warranty. The yearly boiler service on our maintenance plan tests the relief valve and expansion tank before the heating season. Contact us to book.
Boiler leaking water: common questions
Is a boiler leaking water dangerous?
It can be. Water near electrical parts, a fast leak, a gauge in the red or hot water from the relief valve pipe needs a call right away. A slow drip from a fitting is less urgent, but it still lets pressure drop and should be repaired soon.
Why is there water under my boiler?
Common sources are a leaking valve or joint, a worn pump seal, the relief valve pipe, a condensate drain or the boiler body. Where the water appears and how fast it comes help narrow it down. Take photos, note the gauge and let a technician trace it.
Should I turn my boiler off if it’s leaking?
If the leak is heavy, near electrical parts or from the boiler body, call a technician and follow their advice about shutting it down. For a slow drip, put a tray under it and book a repair. Don’t open any covers or touch the controls.
Can a boiler leak be fixed without replacing the boiler?
Often yes. Worn valve seals, pipe joints, pump seals and condensate drains are repairable. A cracked heat exchanger or a leak from the boiler body usually means replacement. A technician can tell which you have once they find the source of the water.
Why does my boiler lose pressure but I can’t see a leak?
The leak may be small, hidden under a floor or behind a wall, or evaporating before it collects. Falling pressure after you’ve ruled out recent bleeding is a clue. A technician can trace it by pressure testing the system and checking the valves and pump.
Is a little water from a condensing boiler’s drain normal?
Yes. A condensing boiler makes water from its exhaust, and it leaves through a small plastic pipe to a drain. A steady flow into a drain is normal. A puddle on the floor, or a pipe that is blocked or frozen, is not, and needs a technician.
Can I use a leak sealant in my boiler?
No. Additives can clog the pump, valves and small passages, and they hide a problem that is still getting worse. A leak should be traced and repaired properly, and a technician can advise on the right treatment for the system.
Who fixes a leaking boiler in the GTA?
Assurance HVAC Heating & Cooling sends TSSA-certified gas technicians to homes in Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville. You approve a flat-rate price first, and work is covered by a written workmanship warranty. The phones are answered 24/7.
Still no heat? We’ll call you back to book a technician.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
