Skip to content
Technician adjusting heating controls during a tune-up
Assurance HVAC Heating & Cooling of Markham

Furnace maintenance in Markham, every fall

(647) 496-5598Open 24/7, day or night

Assurance HVAC Heating & Cooling of Markham provides furnace maintenance in Markham for every type of gas furnace, from the original builder-grade units in older subdivisions to the high-efficiency furnaces in newer homes. A TSSA-certified gas technician cleans, measures and safety-checks the furnace in about one to two hours, tests for carbon monoxide and walks you through what they found. Book a one-off visit, or join our HVAC maintenance plan and we’ll schedule it each fall.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 496-5598Used only to book your visit. Privacy

Key takeaways

  • Fall tune-ups across Markham, from Buttonville and Unionville to Box Grove and Cornell.
  • Each visit takes about one to two hours with a TSSA-certified gas technician.
  • A flat-rate price up front, and any repair is quoted separately for your approval.
  • The maintenance plan includes two tune-ups a year and priority booking.
  • Booked visits get a two-hour arrival window and a text when we’re on the way.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of Markham service team.

On this page
  1. Furnace maintenance in Markham: the tune-up checklist
  2. Why fall is the time for a Markham furnace tune-up
  3. How long a furnace maintenance visit takes
  4. What a tune-up watches for in different Markham homes
  5. Jobs for Markham homeowners between tune-ups
  6. Choosing and changing a furnace filter
  7. Keeping vent pipes clear through a Markham winter
  8. Signs your furnace needs service before the next tune-up
  9. Booking one tune-up or joining the maintenance plan
  10. Manufacturer warranties and your service records
  11. Furnace maintenance in Markham and carbon monoxide
  12. When a tune-up turns up a repair or a replacement
  13. What affects the price of furnace maintenance in Markham?
  14. Furnace maintenance in Markham, neighbourhood by neighbourhood
  15. Furnace maintenance questions from Markham homeowners

Furnace maintenance in Markham: the tune-up checklist

A furnace tune-up combines cleaning, measurements and a full furnace inspection. Starting at the burners and ending at the thermostat, the technician covers the heat exchanger, venting, safety switches and blower along the way, then tests for carbon monoxide before the furnace goes back into service.

  • Clean the burners and look at the flame pattern
  • Clean the flame sensor and check the hot surface igniter for hairline cracks
  • Look over the heat exchanger for cracks, rust or heat damage
  • Take gas pressure and temperature rise readings, and check the blower
  • Test the high limit, rollout and pressure switches and the inducer motor
  • Check the flue or the plastic intake and exhaust for blockages and loose joints
  • Flush the condensate trap and test the drain line and any pump
  • Fire the furnace for a full cycle from the thermostat while checking CO levels

Furnace cleaning covers the burners, sensor, blower compartment and trap, which isn’t the same as duct cleaning. Any repair gets a flat-rate price before it’s done.

Why fall is the time for a Markham furnace tune-up

Aim for a date between late August and early October, ahead of any real cold. That leaves time to order and fit any part the inspection turns up while the house doesn’t need heat yet, and you’re not competing with every furnace across Markham and York Region firing up the same week.

A furnace that sat idle all summer often shows its faults on the first cold start: a flame sensor that dulled over the off season, an igniter that cracks on its first hot cycle, or dust and spider webs in the burners.

How long a furnace maintenance visit takes

Most tune-ups take about one to two hours. A mid-efficiency furnace in an open basement is quicker; add a condensate pump, a humidifier or a few years of skipped service and the visit runs longer. A home with two furnaces needs two full checklists.

We confirm a two-hour arrival window when you book and text you when the technician is on the way.

What a tune-up watches for in different Markham homes

Furnace maintenance in Markham follows one checklist, but the house decides where the technician looks hardest: wear parts on original furnaces in the 1990s and 2000s subdivisions, condensate and venting on high-efficiency furnaces in newer homes, and the chimney draft in older heritage homes.

Original furnaces in Markham’s 1990s and 2000s subdivisions

Many original furnaces there are now 20 or more years old, so the heat exchanger, inducer bearings and control board get the closest look. If the end is near, we say so, and you can plan a replacement on your own schedule.

High-efficiency furnaces in newer homes

In newer homes in Cathedraltown, Wismer and Cornell, the furnace is often a condensing model with plastic venting and a condensate pump. We flush the trap, check the pump’s float and inspect the vent ends outside.

Older homes in Unionville and Markham Village

Where the furnace still vents into a chimney, we check the draft and flue connector for signs of spillage, and clear storage away from the burners in tight basements.

Milliken and Thornhill

Houses here from the 1960s to the 80s often run a later replacement furnace on the original ducts. We watch the temperature rise and the filter closely, because restricted airflow makes a furnace run hot and trip its limit switch.

Jobs for Markham homeowners between tune-ups

Five jobs belong to you between visits: the filter, the humidifier pad, the outdoor vent pipes, the space around the furnace and your CO alarms. Filters get their own section below. Leave the burners, gas valve and gas piping to a licensed gas technician, since a mistake inside the furnace can lead to a gas leak or carbon monoxide.

  • Humidifier pad: replace the water panel at least once a heating season, since a scaled pad stops adding moisture.
  • Vent pipes: after a storm, brush snow and ice off the plastic intake and exhaust pipes by hand.
  • Around the furnace: keep paint, cleaners, boxes and laundry piles away from the burners.
  • CO alarms: press the test button every month and replace any alarm past the end-of-life date on its label.

Choosing and changing a furnace filter

The right furnace filter is one your furnace can breathe through. Most furnaces do well with a filter rated MERV 8 to 11. Going denser in a thin filter, such as MERV 13 at 1 inch, can restrict airflow enough to make the furnace run hot, so match the filter to the furnace, not just the box.

Furnace filter choices and how often to change them
FilterChange itNotes
1-inch pleated, MERV 8 to 11Every 1 to 3 monthsEasy to find, but fills fast in a busy house
4- or 5-inch media cabinetEvery 6 to 12 monthsHolds far more dust with less airflow restriction

Pets, a basement renovation or construction nearby fill a filter faster, so check it monthly in winter. If allergies or smoke are the worry, a thicker media filter or a HEPA bypass beats a denser 1-inch one.

Keeping vent pipes clear through a Markham winter

A high-efficiency furnace breathes through plastic vent pipes, usually two on a side wall. If snow, ice or frost blocks either one, the pressure switch shuts the furnace down. After a heavy storm or a night of drifting, walk around and check them, especially where the pipes end low on a wall or beside a deck.

On Cornell lots with rear lanes, and along townhome rows where shovelled snow gets piled between houses, the pipe ends can vanish under a snowbank. Clear them by hand or with a soft brush, without bending the pipes. If the furnace still won’t run once they’re clear, the condensate drain may have frozen too, so call us.

Signs your furnace needs service before the next tune-up

Some problems shouldn’t wait for the fall visit. New noises, short cycling, a house that takes longer to warm up or a smell that lingers past the first day of heating all point to a part that is wearing out, and fixing it now is usually simpler than dealing with a midwinter breakdown.

  • It’s been more than a year, or you don’t know when it was last serviced
  • The burners light and go out within seconds
  • Water around the furnace, or a condensate pump that runs constantly
  • A yellow, lazy flame, or soot around the furnace or vent

Soot or a yellow flame can mean poor combustion, so shut the furnace off and call. A sounding CO alarm, or anyone feeling ill, means everyone, pets included, goes outside and someone dials 911. For anything already broken, see furnace repair in Markham.

Booking one tune-up or joining the maintenance plan

A one-time furnace tune-up works if you’re happy to book it yourself each year. The plan covers a fall furnace visit and a spring AC visit, two tune-ups a year, plus priority booking, which helps most in the first cold week when it seems all of Markham calls at once.

Both follow the same checklist; the plan simply handles the timing for you.

Manufacturer warranties and your service records

No Ontario law says a homeowner must service a furnace every year. Warranties are a different story: many manufacturers want to see a record of regular servicing before they cover a failed part, so read the terms that came with your furnace and keep each tune-up invoice with them.

That matters most for furnaces still inside their warranty period, such as those in newer Markham homes or an original furnace replaced in recent years. If the paperwork is gone, ask the technician at your tune-up to note the model and serial number so you can look up the terms with the manufacturer.

Furnace maintenance in Markham and carbon monoxide

You can’t see or smell carbon monoxide, and poor combustion, a blocked vent or a cracked heat exchanger can each let it into the living space. Each tune-up looks at the heat exchanger, follows the venting from furnace to outdoors and measures CO, and working alarms cover the months between visits.

By provincial law, homes with a fuel-burning appliance, a fireplace or an attached garage need working CO alarms next to each sleeping area and, since January 1, 2026, on every storey, and Ontario’s carbon monoxide safety page (opens in a new tab) explains the rule. If you ever smell gas, leave without touching switches or lighting anything, and phone Enbridge Gas at 1-866-763-5427 once you’re outdoors. If a CO alarm sounds, get everyone outside and call 911.

When a tune-up turns up a repair or a replacement

Sometimes a tune-up finds more than dust: an inducer motor with worn bearings, a condensate pump failing behind a finished-basement panel or, on an original builder-grade furnace, a cracked heat exchanger. You see the problem for yourself, hear what it means for safety and get a flat-rate price before any repair is made.

A cracked heat exchanger means the furnace stays off, since it can leak carbon monoxide. On a furnace that’s 15 to 20 years old, you get repair and replacement prices side by side, and if a new furnace makes sense, our page on furnace installation in Markham shows how we size one.

What affects the price of furnace maintenance in Markham?

The price of a tune-up depends on the type of furnace, how long it’s been since the last service, the equipment attached to it and how easy it is to reach. The tune-up price is set before work begins, and anything the inspection turns up is quoted separately for you to approve.

What changes the price of a furnace tune-up
FactorWhy
Furnace typeCondensing models add a trap, drain, pump and PVC vents to check
Last serviceA furnace that has gone several years without a visit needs more cleaning
Attached equipmentA humidifier, media filter cabinet or condensate pump adds time
AccessA furnace in a tight closet or behind finished walls takes longer to open up

Furnace maintenance in Markham, neighbourhood by neighbourhood

Our technicians do tune-ups all over the city, including Unionville, Markham Village, Buttonville, Angus Glen, Box Grove, Greensborough, Milliken and Markham Centre, and nearby in Richmond Hill, North York and Toronto. Booking early in the fall gives you the widest choice of dates.

For cooling, heat pumps and everything else, see our HVAC contractor in Markham page.

FAQ

Furnace maintenance questions from Markham homeowners

How often should a Markham furnace be serviced?

Every year, and the best window is late August to early October, before you need steady heat. Older furnaces, homes with pets or renovations under way, and furnaces with repeat problems gain the most from that visit. Between visits, look at the filter monthly and keep the outdoor vent pipes clear after snowfalls.

Is a tune-up worth it on a 20-year-old furnace?

Yes, arguably more than on a new one. At that age the heat exchanger, inducer and control board are the parts most likely to fail, and a cracked heat exchanger is a carbon monoxide risk. A tune-up checks all three and gives you an honest read on the furnace’s condition, so a replacement can be planned instead of rushed.

Is annual furnace maintenance required by law in Ontario?

No. Annual furnace maintenance is recommended, not required. The legal requirement in Ontario is working carbon monoxide alarms next to each sleeping area and on every storey of any home with a fuel-burning appliance, a fireplace or an attached garage. Warranties are where records matter: many manufacturers want proof of regular servicing before they pay for a part, so check your terms and file every tune-up invoice with them.

We just bought a resale home in Box Grove. Should we book a tune-up?

Yes. When you don’t know a furnace’s service history, a tune-up is the quickest way to learn its condition. The technician checks the heat exchanger, safety controls and venting, reads the age off the rating plate and tells you what to expect. It’s also a good time to learn the filter size and test the CO alarms.

What does a tune-up add for a high-efficiency furnace?

Condensing furnaces get a few extra checks. We flush the condensate trap, make sure the drain line runs freely and the condensate pump switches on, check the collector box and condensate trap area for corrosion, and look over the plastic intake and exhaust outside for damage, nests or sagging joints. In finished basements, where a pump failure can wet flooring, those checks matter even more.

Do I need to be home for the whole tune-up?

It helps to have someone there from start to finish, which is usually about one to two hours. The technician needs access to the furnace, the thermostat and the outdoor vent pipes, and at the end walks you through what was cleaned, what was measured and anything that needs attention.

Can I book furnace maintenance in Wismer or Cathedraltown?

The request form and the Markham number on this page reach the same booking team. We cover both, along with Cornell, Milliken and the rest of the city, plus nearby Richmond Hill and North York. A real person calls back to set up a two-hour arrival window, and you see a flat-rate price before work starts.

Should the humidifier be serviced at the same visit?

Yes, it’s easiest to do both at once. A furnace-mounted humidifier needs its water panel replaced, its drain cleared and its humidistat checked before the dry season starts. A scaled pad stops adding moisture, and a blocked drain can drip into the furnace.

Book a visit

Need furnace maintenance in Markham? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 496-5598

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 496-5598Used only to book your visit. Privacy