
Indoor air quality in Markham
(647) 496-5598Open 24/7, day or night
Assurance HVAC Heating & Cooling of Markham approaches indoor air quality in Markham one house at a time, from heritage homes in Unionville and Markham Village to the 1990s and 2000s subdivisions of Berczy Village, Angus Glen and Cathedraltown. Many of those newer homes still run a builder-grade furnace with a 1-inch filter and a tired humidifier. The work covers humidifiers and dehumidifiers, media and HEPA filters, HRVs, ERVs and smart thermostats. For furnaces, AC and the rest, see our HVAC contractor in Markham page.
Key takeaways
- Humidifiers, filtration, HRVs, ERVs and thermostats for Markham homes old and new.
- Builder-grade systems and Unionville heritage houses each get advice that suits them.
- Licensed technicians, WSIB coverage and a written workmanship warranty on installed equipment.
- A flat-rate price follows the assessment, and work starts only once you approve it.
- Use the request form or call; we confirm a two-hour window and text before arriving.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of Markham service team.
On this page
- Clues that point to an air problem in a Markham home
- Builder-grade setups in Box Grove, Greensborough and Wismer
- Indoor air quality in Markham heritage homes
- Leaky returns and dust in older Milliken and Thornhill houses
- Bypass, fan-powered or steam: humidifiers explained
- Cooling-season humidity upstairs in Berczy Village and Angus Glen
- MERV ratings and media cabinets in plain terms
- Fresh air for tight Cornell and Cathedraltown homes
- Townhome closets and condos in Markham Centre
- Smart thermostats, humidistats and the common-wire question
- Duct cleaning after renovations in Markham homes
- Indoor air quality in Markham: the assessment visit
- Indoor air quality in Markham and what drives the cost
- Keeping the equipment working between visits
- Indoor air quality questions from Markham homeowners
Clues that point to an air problem in a Markham home
The usual clues are easy to spot once you know them: a crackle of static on the carpet, dry skin by February, frost along the window frames, dust that’s back the day after cleaning and cooking smells that linger into the evening. Upstairs rooms that feel stuffy, and a finished basement that smells damp in summer, round out the list.
- Static and dry skin in mid-winter
- Frost or condensation on window frames
- Dust returning quickly to furniture and floors
- Cooking smells that hang around
- A stuffy upper floor or a damp basement
Builder-grade setups in Box Grove, Greensborough and Wismer
Homes in Box Grove, Greensborough, Wismer and Cachet mostly went up in the 1990s and 2000s with a builder-grade package: a mid-range furnace, a 1-inch filter rack, a basic bypass humidifier and, on newer streets, an HRV. Much of that equipment is now at the age where pads, valves and motors give out, and the filter was never much more than blower protection.
The upgrade path is usually simple: a media filter cabinet, a new humidifier on a proper humidistat and a serviced HRV. If the furnace itself is near the end of its life, doing it all with the replacement saves opening the ducts twice.
Indoor air quality in Markham heritage homes
Heritage homes in Unionville and Markham Village usually come with cramped basements, aging ductwork and more air leakage than newer houses, so they dry out quickly in winter. Improving indoor air quality in Markham heritage homes usually starts with humidity, then sealing leaky return ducts that pull dust up from old basements.
A number of Unionville houses still rely on cast iron radiators, with no ducts at all. There, an HRV on its own small duct system, or the dry mode on a ductless heat pump, does the work a furnace-mounted unit would. Both villages contain heritage conservation districts, where a wall hood visible from the street can require approval, and the City of Markham (opens in a new tab) is the place to ask before work is planned.
Leaky returns and dust in older Milliken and Thornhill houses
Milliken and the Markham side of Thornhill are mostly 1960s to 80s houses, and many now run a second or third furnace on the original ducts. Old return ducts often leak at the joints and pull air from the basement, so dust comes back as quickly as it’s cleaned. Sealing those returns is often the single most useful fix.
Few upstairs returns also leave bedrooms stuffy, because air has nowhere to go once the door is shut. A return added on the upper floor, or a jumper duct, gives that air a path back.
Bypass, fan-powered or steam: humidifiers explained
All three add moisture to the air the furnace sends out, and all three run from a humidistat. They differ in how much moisture they can add and what they need to work. For most Markham homes a bypass or fan-powered unit does the job, while steam suits large houses and heat pump systems.
| Type | Needs | Strength |
|---|---|---|
| Bypass | A small duct between supply and return, a water line and a drain | Simple, with one pad to change each season |
| Fan-powered | Power for its fan, a water line and a drain | More output, and no bypass duct required |
| Steam | A dedicated circuit and a water line | Precise control that doesn’t depend on furnace heat |
Cooling-season humidity upstairs in Berczy Village and Angus Glen
Large two-storey homes in Berczy Village and Angus Glen often feel fine on the main floor and clammy upstairs in July. Their ductwork was laid out for heating, so the upper floor gets less cool, dry air, and an oversized air conditioner stops before it removes much moisture. Fixing upstairs airflow and slowing the cooling cycle help most.
When the air conditioner is due, a variable-speed system dries the air better, and a ducted heat pump can take its place, as our heat pump installation page describes. A whole-home dehumidifier is the answer for a finished basement that stays damp all summer.
MERV ratings and media cabinets in plain terms
MERV ratings run from 1 to 16, and higher numbers catch smaller particles. The rating isn’t the whole story, though: a filter also needs enough surface area for air to pass without strain. That’s why a 4- or 5-inch media cabinet at MERV 11 to 13 usually beats a thin MERV 13 filter jammed into a builder rack.
| Filter | Depth | Change it |
|---|---|---|
| Fibreglass | 1 inch | Every month |
| Pleated | 1 inch | Every one to three months |
| Media | 4 or 5 inches | Once or twice a year |
| HEPA bypass | Separate cabinet beside the furnace | On the maker’s schedule |
Fresh air for tight Cornell and Cathedraltown homes
Newer homes in Cornell and Cathedraltown are built tight, which saves energy but traps cooking smells and moisture unless a ventilator swaps the air. Most have an HRV, and keeping it running, clean and balanced is the main thing standing between those homes and foggy windows in winter.
An HRV exchanges heat between outgoing and incoming air and removes moisture with the stale air. An ERV also passes some moisture back, which suits homes that feel too dry in winter or muggy in summer. Either one needs clear outdoor hoods, and on rear-lane Cornell lots we check that hoods aren’t beside a garage door or a neighbour’s exhaust.
Townhome closets and condos in Markham Centre
Cornell townhomes and Markham Centre condos often squeeze a small furnace, a combi boiler or a heat pump air handler into one closet. The filter is easy to forget and a media cabinet may not fit, so the practical fix is the best filter the slot allows, changed on time, plus a working bathroom fan or ERV.
Condo buildings often have rules about outside contractors in suites, so we go over those with you first.
Smart thermostats, humidistats and the common-wire question
Many smart thermostats need a common wire, which older Markham furnaces and some builder installs don’t have at the thermostat. We look at the wiring and the equipment before installing, and can run the extra wire where it’s needed. The payoff is control over humidity, fan circulation and schedules from one screen.
Some models also run the humidifier and HRV. ENERGY STAR Canada (opens in a new tab) keeps a list of certified smart thermostats, and we’ll install one you’ve bought if it’s compatible.
Duct cleaning after renovations in Markham homes
It can make sense once a kitchen or basement project is finished, after a pest problem, or if there’s visible debris in the vents. It rarely fixes ongoing dust on its own, since that usually comes from leaky returns and a basic filter. Ask the technician to look into the ducts while on site, and you’ll get a straight answer on whether cleaning would make a difference.
Indoor air quality in Markham: the assessment visit
During the visit, the technician listens to what you’ve noticed, then checks humidity on each floor, the filter and how well it seals, the humidifier, any HRV, the return ducts and static pressure. You leave with a clear explanation, a recommended fix and a flat-rate price, and nothing is installed until you agree.
- Notes on what you’ve seen and where
- Humidity readings upstairs, downstairs and in the basement
- Filter fit, return ducts and static pressure checked
- The humidifier and HRV inspected
- A flat-rate price for the fix
Indoor air quality in Markham and what drives the cost
Price follows the work: the equipment chosen, how it connects to the ducts and plumbing, and how easy the mechanical room is to work in. A media cabinet on an open builder furnace is quick, while an HRV in a heritage house with plaster walls takes planning. Either way, the price is fixed before work starts.
| Factor | Why |
|---|---|
| Equipment | Each humidifier, filter, dehumidifier or ventilator has different parts and labour |
| Age of the house | Heritage homes and older ducts can need sealing or new runs first |
| Access | Tight closets and finished basements slow the work |
| Connections | Water, drain and electrical connections may need to be added |
Keeping the equipment working between visits
Small jobs keep everything working: change the filter on schedule, fit a new humidifier pad each fall, close the humidifier damper in spring, and clean the HRV filters every few months. A fall furnace maintenance visit is a good time to check the humidifier, and our maintenance plan adds a spring visit for cooling.
We serve all of Markham, from Buttonville and Milliken to Box Grove and Cornell, plus Richmond Hill, North York and Toronto nearby.
Indoor air quality questions from Markham homeowners
Why is our Unionville house so dry every winter?
Older houses leak more air, and cold outdoor air holds very little moisture, so once it warms up inside the humidity drops. A whole-home humidifier, if the house has ducts, brings it back toward 30 to 40 percent, and sealing obvious drafts helps it keep up. In radiator homes, room units or a ductless system are the usual alternatives.
Our builder humidifier hasn’t worked in years. Repair or replace?
If the housing is sound, a new pad, water valve and humidistat often bring it back to life. If it’s cracked or corroded, or the furnace is being replaced, a new unit is the better buy. We look at it, explain which makes more sense and give you a flat price for either option.
Do we need an HRV in a newer Cathedraltown home?
Most newer homes there already have one, so the real question is whether it’s running and clean. Tight construction makes the HRV the main source of fresh air, and a clogged or switched-off unit leads to stale rooms and foggy windows. A service visit cleans the core and filters and balances the airflow.
Which MERV rating suits most Markham furnaces?
MERV 8 handles everyday dust, and MERV 11 to 13 catches finer dust, pollen and smoke particles. The higher ratings work best in a 4- or 5-inch media cabinet, where they don’t restrict airflow. In a 1-inch slot, stick with what the furnace maker allows, and we’ll check static pressure if you want to go higher.
Can a heritage home have an HRV without changing how it looks?
Usually. Indoor duct runs can follow closets and basement ceilings, and the outdoor hoods can often go on a side or rear wall. In a heritage conservation district, ask the City of Markham before any change visible from the street. We plan hood locations with you before quoting.
Does a dehumidifier help a clammy second floor in summer?
Sometimes, but airflow and the air conditioner come first. If the AC is oversized or the blower runs at its heating speed, the upstairs stays humid even when it’s cool. Once those are sorted, a whole-home dehumidifier is worth it where the house, or the finished basement, still feels damp.
How often should we change a 4-inch media filter?
Once or twice a year in most homes, and more often with pets, a renovation or a smoky summer. Pull it out every couple of months in the first year to learn how fast it loads, then replace it once it turns dark grey and heavy with dust. Writing the date on the frame helps.
Who installs equipment for indoor air quality in Markham homes?
Our own technicians, all licensed, WSIB covered and insured. Gas hookups are done by TSSA-certified gas technicians, and any cooling work by 313A-certified mechanics. Each installation comes with a written workmanship warranty, and the flat-rate price you approved before the work is the price you pay.
Need indoor air quality in Markham? We’ll call you back to book.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
