
A heat pump has to work in January as hard as it does in July, so a fault matters. We handle Trane heat pump repair for ducted and ductless systems across Toronto and the GTA, with 313A-certified technicians and a flat-rate price you approve first. Thinking about a new system? See heat pump installation in Toronto.
Key takeaways
- We repair Trane ducted and ductless heat pumps across Toronto and the GTA.
- 313A-certified technicians handle refrigerant and electrical diagnosis.
- Trane states its Canada-only Resolute line heats down to -30 ºC.
- You approve a flat-rate price before any repair starts.
- Open 24/7, with technicians out day or night when the heat fails.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- Trane heat pump repair across the GTA
- The Trane Resolute: a Canada-exclusive ducted heat pump
- Trane ductless wall units and what they need
- Trane heat pump not heating: what we look for
- Frost, snow and defrost steam in winter
- Checks to try before booking Trane heat pump repair
- Trane Home, kumo cloud and remote control
- Trane heat pump flash codes on the 5TWR4 defrost control
- Trane heat pump repair or replacement?
- Registration and warranty on a Trane heat pump
- What a repair visit looks like, and winter emergencies
- Trane heat pump repair questions
Trane heat pump repair across the GTA
We repair Trane heat pumps in Toronto, North York, Mississauga, Oakville, Vaughan, Markham and Richmond Hill. We are an independent contractor that services all major brands, and a heat pump needs a technician who understands both the refrigeration side and the electrical side.
The Trane Resolute: a Canada-exclusive ducted heat pump
Trane’s Canadian Resolute brochure describes a ducted heat pump with an indoor air handler that can use existing ductwork. Trane says it keeps a home warm in temperatures as low as -30 ºC, and even lower with auxiliary electric heat.
Trane’s spec table lists a DC inverter rotary variable-speed compressor, R410A refrigerant, a heating range of -30 ºC to 24 ºC and sizes from 2 to 5 tons. These are Trane’s statements, not our measurements.
Trane ductless wall units and what they need
Trane’s US site lists a Standard Wall Mount ST single-zone heat pump with an inverter-driven compressor that works with the kumo cloud control app. Another wall-mounted model pairs an indoor unit with an outdoor heat pump, and that page makes no cold-weather claim for it.
Those are US listings and Canadian availability isn’t stated, so we identify your ductless system from its labels. A ductless system has an indoor head in each zone, which means a fault can affect one room, not the whole house.
Trane heat pump not heating: what we look for
A heat pump that runs without heating can have an electrical, airflow or refrigerant fault, and winter adds frost and defrost to the list. We test each in turn rather than assuming it is the compressor.
- Outdoor coil iced over, or a defrost cycle that doesn’t start or doesn’t finish.
- Reversing valve stuck, so the system heats when it should cool or the reverse.
- Capacitor, contactor or fan motor in the outdoor unit that has weakened.
- Low refrigerant charge from a leak, which we locate and repair first.
- Dirty filter, closed vents or a failing indoor blower limiting airflow.
- Auxiliary electric heat that doesn’t come on when the outdoor unit can’t keep up.
Frost, snow and defrost steam in winter
Some frost and a puff of steam during defrost are normal for a heat pump in cold weather. A thick block of ice, a unit buried in snow or a defrost that never ends is not, and it deserves a visit.
Keep the outdoor unit clear of drifts and roof run-off, and leave the ice to a technician. Chipping at it can damage the coil, which is a costly mistake that a simple clearing of snow around the cabinet avoids.
Checks to try before booking Trane heat pump repair
These simple checks don’t need tools and may save you a visit, or at least tell us more when you call. Do them with the system switched to its normal heating mode, and skip anything that means opening a cabinet.
- Confirm the thermostat is set to Heat, above room temperature, with fresh batteries if it uses them.
- Check the breakers for the indoor and outdoor units.
- Replace a dirty filter on the air handler or clean the filters on a ductless head.
- Clear snow and debris from around the outdoor unit.
- Note whether the Trane Home app, kumo cloud app or remote shows a message, and photograph it.
Trane Home, kumo cloud and remote control
Trane says Resolute works out of the box with Trane Home, an app and thermostat for remote control and scheduling. The ST wall mount on Trane’s US site is listed as compatible with the kumo cloud control app.
If a heat pump seems to ignore your schedule, the cause may be an app setting or lost connection and not the equipment. Tell us what app or remote you use, and we check the equipment and the settings together.
Trane heat pump flash codes on the 5TWR4 defrost control
These codes are from Trane’s 5TWR4 heat pump installation, operation and maintenance manual (opens in a new tab), ODR-SVX004D-EN, which covers the 5TWR4018A1000A to 5TWR4060A1000A heat pumps. The defrost control board inside the outdoor unit’s control box shows a fault by flashing its fault LED a set number of times.
Because that board sits in the control box, a technician reads it. The manual targets a defrost of about 4 minutes with a 15-minute limit, locks the heat pump out when the outdoor air reaches about -12 °F and resumes at -3 °F or warmer. We haven’t found a published code list for the Canada-only Resolute, so these codes apply to the 5TWR4 only. A flash count names a part to test, not a diagnosis.
| Code | What it means | What to do |
|---|---|---|
| Status LED, 1 flash a second (2 with a call) | Normal operation: standby, or running on a call for heating or cooling | No action needed |
| 1 Flash | Outdoor air temperature sensor out of range, open or shorted; defrost falls back to a timer | Book a repair |
| 2 Flash | Coil temperature sensor out of range, open or shorted; a defrost is forced after every 60 minutes of running | Book a repair |
| 3 Flash | Low pressure switch is open | Call a technician |
| 4 Flash | Hard lockout after the 9th low pressure trip; only a low voltage power cycle clears it | Call a technician |
| 5 Flash | Soft lockout; it clears when the lockout period ends | Call a technician |
| 6 Flash | Defrost cycles too close together; the system runs timed heating cycles for a while | Book a repair |
| 7 Flash | Low ambient soft lockout: the outdoor air is too cold for the heat pump | No repair needed; the manual says it resumes as the outdoor air warms |
If a technician reads you a flash count, note it along with the outdoor temperature and what the system was doing. Our technicians check the fault LED on site and test the sensor or pressure switch it points to before replacing anything.
Trane heat pump repair or replacement?
A heat pump lasts about 15 years, so most repairs on a younger system are worth making. Compressor or refrigerant trouble on an older one calls for a closer look at what a replacement would involve.
| Situation | Usually | Reason |
|---|---|---|
| Capacitor, contactor or sensor | Repair | Small parts on a system with life left |
| Defrost control or reversing valve | Repair | A moderate repair on a working system |
| Compressor failure near 15 years | Compare both | A major repair at the end of typical life |
| Repeated refrigerant leaks | Compare both | Leak repairs can recur on aging coils |
When replacement comes up, rebates may apply. Eligibility depends on the home and current heating fuel, and our rebates page explains how to check the Home Renovation Savings Program (opens in a new tab).
Registration and warranty on a Trane heat pump
Trane’s Resolute brochure says registered limited warranty terms are available when you register within 60 days of installation, otherwise base limited warranty terms apply. That comes from a brochure, not the warranty page, so confirm with Trane’s Canadian warranty page.
Keep your installation invoice and registration confirmation together. Our maintenance plan adds service records, and our repairs carry a written workmanship warranty.
What a repair visit looks like, and winter emergencies
On a Trane heat pump repair visit, the technician checks both units, airflow, electrical readings and refrigerant pressures, then explains the fault and gives you a flat-rate price. Nothing starts until you approve it.
If the heat goes out on a cold night, call. We’re open 24/7 and technicians go out day or night. Local details are on our page for heat pump installation in Markham.
Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Trane. Brand names are trademarks of their owners.
Trane heat pump repair questions
What is the Trane Resolute heat pump?
Trane’s brochure describes Resolute as a Canada-exclusive ducted heat pump with an indoor air handler that can use existing ductwork. Trane states it heats in outdoor temperatures as low as -30 ºC, and lower with auxiliary electric heat. We confirm what you have from the unit’s labels.
Why is my Trane heat pump covered in ice?
A light frost that clears during defrost is normal in winter. A thick, lasting block of ice points to a defrost fault, restricted airflow or low refrigerant. Clear snow from around the unit, but don’t chip the ice, because that can damage the coil. Call us to diagnose it.
Can you repair a Trane ductless mini-split?
Yes. Our technicians work on Trane ductless heat pumps, including wall-mounted units. Trane’s US site lists a single-zone wall mount with an inverter-driven compressor. We identify your system from its labels, test the indoor and outdoor units together, and quote a flat price before work.
Does a Trane heat pump need backup heat?
Trane says Resolute can produce heat in outdoor temperatures as low as -30 ºC, and even lower with auxiliary electric heat. Whether your home needs backup depends on the system and the house. If the auxiliary heat is not coming on when it should, we can test it.
How do I register my Trane heat pump?
Trane’s Resolute brochure says registered limited warranty terms are available when you register within 60 days of installation. Check Trane’s Canadian warranty page for the current process. We can’t register it for you, but we can leave a written record of any repair we do.
What does a Trane heat pump error code mean?
On Trane’s 5TWR4 heat pump, the defrost control flashes a fault LED inside the outdoor unit. Three flashes means the low pressure switch is open, and seven flashes is a low ambient lockout in very cold weather that clears as it warms. A technician reads that LED. We haven’t found a published code list for the Resolute, so tell us your model when you call.
Is my Trane heat pump worth repairing?
Often, yes, especially under 15 years old with a small failed part. Compressor failures or repeated leaks on an older system need a harder look. We explain the repair and a replacement path, with a flat-rate price for the repair, so you can decide with the full picture.
Do you serve Trane heat pump owners in Oakville and Vaughan?
Yes. We cover Toronto, North York, Mississauga, Oakville, Vaughan, Markham and Richmond Hill. Booked visits get a two-hour arrival window with a text message, and winter no-heat calls are answered around the clock, with technicians out day or night. Your price is flat-rate and approved first.
Need Trane heat pump repair? We’ll call you back to book.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
