
Gree heat pump repair in Toronto often starts with one question: is the unit faulty, or has the temperature dropped below what it can handle? Assurance HVAC Heating & Cooling works that out on site for Gree ducted air handlers and ductless mini-splits, with 313A-certified mechanics and a flat-rate price you approve first. Replacing instead? See heat pump installation.
Key takeaways
- Gree ducted and ductless heat pumps repaired across Toronto and the GTA.
- We separate real faults from cold-weather limits before recommending parts.
- 313A-certified mechanics, WSIB covered and fully insured.
- Flat-rate price approved before work starts, plus a written workmanship warranty.
- Open 24/7, with technicians out day or night for no-heat emergencies.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- Gree in brief: who makes it and where it sits in Canada
- Repairs on the ducted UNIX R32 air handler
- LOMO and Free Match ductless mini-splits
- Gree heat pump repair or a unit too cold to run?
- What Gree states about low-temperature heating
- Ice on the outdoor unit and slow thaws
- Weak summer cooling, odours and dripping heads
- Wi-Fi kits, the app and the LED display
- Gree mini-split error codes: what F0, E6 and the others mean
- Warranty papers and finding your model number
- Gree heat pump repair or replacement: how to decide
- Booking Gree heat pump repair in Markham and across the GTA
- Gree heat pump repair questions
Gree in brief: who makes it and where it sits in Canada
Gree Electric is based in Zhuhai, Guangdong, China, and sells under the GREE brand. GREE Canada calls itself the Canadian division of Gree, established in 2011, and its predecessor Sunrise Tradex was founded in 1990.
We repair Gree heat pumps as an independent contractor. If your system was installed by someone else, we still diagnose it and quote the repair in writing.
Repairs on the ducted UNIX R32 air handler
Gree’s UNIX R32 is a central ducted air handler with a cased coil option. GREE Canada says it uses DC Inverter Technology and a two-cylinder, two-stage compressor, works with 24 VAC thermostats, and can pair with a furnace plus cased coil.
For repairs that means checking thermostat wiring and low-voltage power, the blower, the coil and the drain pan alongside the outdoor unit. A weak-heat complaint is often airflow in the ducts, not the compressor.
LOMO and Free Match ductless mini-splits
Gree’s Canadian site lists two ductless families. Each has its own controls and features, so knowing the name on your indoor unit helps us bring the right parts and read the right manual.
- LOMO 23 single-zone: G10 inverter technology, optional Wi-Fi kit, washable dust filters and an adjustable LED display
- Free Match wall-mounted units: G10 inverter technology, GREE+ app Wi-Fi control, a remote included, in 9000, 12000, 18000 and 24000 BTU
- Free Match units are wall-mounted, and on any ductless head, drains, fans and filters are the usual repair items
Gree heat pump repair or a unit too cold to run?
A Gree unit may reduce output or shut itself off below its rating, and that’s different from a fault. GREE Canada’s FAQ says a unit rated to -25 °C does not necessarily stop working below that, heating output drops, and without backup heat it may shut itself down to avoid damage.
So if your mini-split goes quiet on the coldest night, that may be self-protection. If it stops at -5 °C, it’s not. We check the model’s stated range, then test the unit at the temperature you’re seeing.
What Gree states about low-temperature heating
GREE Canada states the UNIX R32 delivers heating despite outdoor temperatures as low as -30 °C, with a heating ambient range of -30 to 24 °C. For the LOMO 23 it states comfort at temperatures as low as -25 °C and a heating range of -25 to 24 °C.
These are the maker’s figures. Your own house, your installation and the unit’s condition all affect what you get. Backup heat for the coldest week is a sensible plan, and our furnace repair team can keep a gas backup ready.
Ice on the outdoor unit and slow thaws
Frost that melts away in a defrost cycle is normal. A unit that keeps icing, or that never fully thaws, has an airflow, sensor, charge or drainage fault. Don’t chip at it, and don’t pour hot water.
We look at the clearance around the unit, the condensate path and the defrost sensors. If a drain freezes in place, we also talk about raising the unit so meltwater can leave.
Weak summer cooling, odours and dripping heads
When a Gree mini-split cools poorly, the cause is usually a filter, a coil or a drain before it’s refrigerant. Washable dust filters on the LOMO line make the first step easy: wash, dry and refit.
If dripping continues after the filter is clean, the drain or the coil needs attention. A low charge means a leak, and our 313A-certified mechanics find and repair it before recharging to code.
Wi-Fi kits, the app and the LED display
The LOMO 23 offers an optional Wi-Fi kit and an adjustable LED display, and the Free Match line lists GREE+ app control. Not every unit has Wi-Fi, so check whether yours was installed with the kit.
If the display blinks a letter and a number instead of the temperature, the unit is showing an error code. The next section lists the common ones for the LOMO 23.
Gree mini-split error codes: what F0, E6 and the others mean
These codes are from GREE Canada’s LOMO Series 23 owner’s manual (opens in a new tab), which covers the GWH09QC to GWH24QC-D3DNA1D wall units. When something is abnormal, the manual says the temperature indicator on the indoor unit blinks and shows the code. A wired controller, where one is fitted, shows it on screen.
The manual splits codes into two groups. For E5, E6, E8, U8 and H6 it says a restart can clear the fault, and to call a professional if it doesn’t; for the others, call straight away. Read F0 carefully: with a zero it is a charge shortage or blockage, while the same list uses FO, with the letter O, for pump-down. Vapour from the outdoor unit while heating is defrost, which Gree calls normal.
| Code | What it means | What to do |
|---|---|---|
| F0 | System charge shortage or blockage protection | Call a technician |
| E6 | Communication error between the indoor and outdoor units | Restart once; if the code returns, call a technician |
| E5 | Whole-unit over-current protection | Restart once; if the code returns, call a technician |
| E8 | Overload protection | Restart once; if the code returns, call a technician |
| H6 | Motor stalling | Restart once; if the code returns, call a technician |
| U8 | PG motor zero-crossing protection | Restart once; if the code returns, call a technician |
| C5 | Jumper error | Call a technician |
| F1 | Return air temperature sensor open or short circuited | Call a technician |
| F2 | Evaporator temperature sensor open or short circuited | Call a technician |
| F3 | Outdoor ambient temperature sensor open or short circuited | Call a technician |
| E1 | High pressure protection | Call a technician |
| E3 | Low pressure protection | Call a technician |
| H3 | Compressor overheating protection | Call a technician |
| U7 | 4-way valve reversing error | Call a technician |
Write the code down exactly, including whether it is a zero or the letter O, and note what the unit was doing. Our technicians check the code on site and test the sensor, motor or circuit it names before swapping any part.
Warranty papers and finding your model number
GREE Canada’s warranty page that we found links only to Western Canada, so we can’t state Ontario terms or a registration deadline. Keep your invoice and install date, and ask your installer or GREE Canada about coverage.
We have no sourced label location for Gree units. Look for rating labels on the indoor and outdoor units, or let our technician locate them during the visit.
Gree heat pump repair or replacement: how to decide
With a lifespan of about 15 years for a heat pump, a newer Gree usually earns a repair. Replacement is a fair question when the sealed system fails on an older unit.
| Finding | Direction |
|---|---|
| Shuts off only in the deepest cold | Check rating, add backup heat |
| Dirty filter, coil or drain | Clean and repair |
| Failed fan, board or sensor on a newer unit | Repair |
| Compressor failure on an older unit | Price both options |
If you replace, rebates may apply to qualifying heat pumps. We never quote amounts, since they depend on your home and heating fuel.
Booking Gree heat pump repair in Markham and across the GTA
Gree heat pump repair is available in Markham, Vaughan, North York, Toronto and the other service areas, including Markham. We’re open 24/7, and technicians go out day or night for no-heat emergencies.
For booked visits you get a two-hour arrival window with a text. You see a flat-rate price first, you approve it, and then the work starts with a written workmanship warranty behind it. GREE Canada’s heat pump FAQ (opens in a new tab) is worth reading.
Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Gree. Brand names are trademarks of their owners.
Gree heat pump repair questions
My Gree mini-split shuts off when it’s very cold. Is it broken?
It may be protecting itself. GREE Canada says a unit rated to -25 °C doesn’t necessarily stop below that, but output drops and without backup heat it may shut itself down. If it stops at milder temperatures, there’s likely a fault, and we test it on site.
Do you repair Gree ducted systems like the UNIX air handler?
Yes. The UNIX R32 is a ducted air handler with a cased coil option, and we repair both the indoor and outdoor sides. We check thermostat wiring, blower, coil and drain along with the outdoor unit, since airflow problems often look like a weak heat pump.
How do I clean the filters on my Gree LOMO?
GREE Canada lists washable dust filters on the LOMO 23. Turn the unit off, slide the filters out, rinse them, let them dry fully and refit them. Follow your manual for timing. A clogged filter cuts airflow and can ice the indoor coil.
Does my Gree have Wi-Fi?
Not necessarily. GREE Canada lists an optional Wi-Fi kit for the LOMO 23 and GREE+ app control on Free Match units. If your unit didn’t get the kit at install, there’s no app link. We can confirm what you have during a visit.
Why is there ice on my outdoor unit?
Some frost that clears in a defrost cycle is normal. Constant icing or ice that never thaws points to airflow, a sensor, low charge or poor drainage. Turn the unit off, leave the ice alone and call us so we can find the cause.
What does a Gree heat pump error code mean?
It names what the unit protected itself from or which part it flagged. On GREE Canada’s LOMO 23 wall units, F0 is system charge shortage or blockage protection, and E6 is a communication error between the indoor and outdoor units. Gree says a restart can clear E6, but if it returns, or for F0, call us. The table above lists the common codes.
Is Gree sold through a local network, and who handles my warranty?
GREE Canada describes working through licensed channels, but we can’t state your warranty terms. We’re an independent contractor and don’t act for the maker. Keep your invoice and install date, and ask your installer or GREE Canada directly about coverage.
How much does a Gree repair cost?
It depends on the fault, so we don’t post prices. After diagnosis you get a flat-rate price in writing and approve it before work starts. The repair carries our written workmanship warranty, and a no-heat emergency is handled first, day or night.
Need Gree heat pump repair? We’ll call you back to book.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
