Skip to content
Water heater tank in an unfinished basement
Brands we repair

Rheem water heater repair in Toronto

(647) 692-0819Open 24/7, day or night

Rheem water heater repair is work our technicians do across Toronto and the GTA, on gas and electric tanks and tankless units. We find the failed part, explain it in plain terms and quote a flat-rate price you approve before work starts. Thinking about the next tank instead? Read about water heater installation.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • We repair Rheem tank and tankless water heaters across Toronto and the GTA.
  • Keep the serial number handy: Rheem says it is required to verify a warranty.
  • Gas work is done by TSSA-certified technicians, priced flat-rate before we start.
  • Open 24/7, with technicians out day or night for no-hot-water calls.
  • We find the failed part and explain it in plain terms before you decide on repair or replacement.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Rheem in brief: founded 1925 with a long list of sister brands
  2. Tank, tankless, heat pump and more: where your Rheem fits
  3. Rheem water heater error codes on power vent models
  4. Faults we see on Rheem tanks, and what usually fixes them
  5. Your serial number and warranty: do this before the repair
  6. Rheem tankless water heaters: flow, scale and venting
  7. Safe checks if the hot water just stopped
  8. Rheem water heater repair, replacement or a switch to tankless?
  9. Should you own your Rheem tank or rent one?
  10. Leak, gas smell or alarm: what to do first
  11. Booking a Rheem water heater repair visit
  12. Rheem water heater repair questions

Rheem in brief: founded 1925 with a long list of sister brands

Rheem Canada’s site says Rheem Manufacturing Company was founded in 1925, and lists sister brands including Ruud, Richmond, Eemax, EcoSmart, IBC and Raypak. Rheem is an independent subsidiary of Paloma Industries, headquartered in Atlanta, Georgia.

We do not claim the brands share parts or factories. For repairs, the point is simpler: the label on your tank tells us which product we are working on.

Tank, tankless, heat pump and more: where your Rheem fits

Rheem Canada groups residential water heating into tank, tankless, heat pump, point-of-use, boilers and combi boilers. This page covers two of them: gas and electric tanks, and tankless units. The error code table further down applies only to the power vent and power direct vent tanks.

  • Professional Classic Series tanks, offered in power vent, power direct vent, direct vent and electric forms
  • Power vent models listed as induced draft with the Guardian FVIR System
  • Heavy Duty power direct vent models listed with a flammable vapor detection system
  • Tankless units, which we service for flow, venting and scale

Rheem water heater error codes on power vent models

Rheem lists its power vent and power direct vent models with an integrated self-diagnostic system control, thermostat and gas valve. Its Canadian use and care manual for Professional Classic power vent tanks (40, 50 and 60 gallon) shows a fault as a pattern across the six temperature indicator lights on the gas control.

Read the lights left to right: in the table, ● is a lit light and ○ is an unlit one. The codes are on page 38 of Rheem’s Canadian power vent use and care manual (opens in a new tab), and the Canadian power direct vent manual uses the same patterns. The Canadian Rheem manuals we checked do not mention a blue light, so we do not explain one.

Rheem power vent gas control light patterns, from the Canadian use and care manual
CodeWhat it meansWhat to do
●○○●●○System in lockoutCheck that the gas supply valve to the heater is open. If it is, book a repair
●○●○○●Pressure switch stayed open more than 5 seconds after the blower startedCheck that the outdoor vent terminal is clear of snow or debris. If it is, book a repair
●○●○○○Pressure switch stayed closed more than 5 seconds after the call for heat beganBook a repair
●○●○●●Error in the hot surface ignitor circuitBook a repair
●○○●○○An open earth ground circuit to the ignition systemCall a technician
●○●○●○Wiring error or a high resistance to earth groundCall a technician
●○○○●●Problem in the gas valve driver circuitTurn power to the heater off for 10 seconds and back on, once. If it returns, book a repair
●○●●●○ or ●●●●●●Problem with the internal circuitSame single power cycle. If it returns, book a repair
●○○○●○Flame signal sensed out of proper sequenceCall a technician
●○●●○○One of the temperature adjust buttons is stuck closedPress and release each button once. If the pattern stays, book a repair
●○●●○●Water temperature sensor is open or short circuitedBook a repair
●○○○○●Flammable vapour sensor detected vapours; the unit shuts down and locks outLeave it off and call a technician

Take a photo of the lights before you switch anything off. Our TSSA-certified gas technicians read the pattern on site and test the blower, switch, ignitor or valve it names before any Rheem water heater repair starts.

Faults we see on Rheem tanks, and what usually fixes them

Symptoms point toward parts. Cold water after a pilot outage suggests a thermocouple or flame sensor. A tank that clicks but never lights suggests an igniter. Water that heats slowly points at sediment, a failing element on an electric tank, or a gas valve that is not opening fully.

Symptom, likely cause and typical fix on a tank water heater
What you noticeLikely causeTypical fix
Flame goes out after lightingThermocouple or flame sensorReplace the sensor
Clicking, no flameIgniter or gas valveTest, replace the failed part
Fan runs, burner will not fireVent blockage or pressure switchClear the vent, replace the switch
Rumbling and slow heatSedimentFlush the tank
Rusty hot waterWorn anode rod or tank corrosionCheck or replace the anode

Your serial number and warranty: do this before the repair

Rheem Canada’s warranty page says to register products to extend coverage, and that your serial number is required to verify a warranty. A photo of the rating label on your tank saves a long search later.

Rheem’s Canadian warranty page (opens in a new tab) is where to check terms. We do not quote warranty lengths. Rheem has not published a rule for reading the date from its serial numbers on the pages we reviewed, so we will not date your tank from one.

Rheem tankless water heaters: flow, scale and venting

Rheem sells tankless water heaters as well as tanks, and the common repair story is about water quality, not burners. Mineral scale narrows the heat exchanger, flow drops, and the unit overheats or cuts out.

We service tankless units by checking the vent and condensate path, flushing scale from the heat exchanger and confirming gas supply and water flow. A tankless unit typically runs about 20 years when it is looked after.

Safe checks if the hot water just stopped

If the hot water stops suddenly, a few checks can sort out the simple causes before you book a visit. They are quick, need no tools, and you should stop the moment you smell gas or feel unsure about anything you see.

  • Electric tank: look at the breaker first
  • Gas power vent: confirm the plug is in and the breaker is on
  • Any gas tank: check that the gas shut-off is open
  • Note whether a light or display on the unit shows something unusual
  • Check whether every hot tap is cold or only one

Rheem water heater repair, replacement or a switch to tankless?

Compare the failure to the tank’s age. A gas tank typically lasts 8 to 12 years. If the part that failed is small and the tank is inside that range, repair is usually reasonable. A leaking tank shell means replacement, and that is the moment to consider tankless.

Tank versus tankless when a Rheem unit reaches the end of the road
QuestionTankTankless
Typical lifespan8 to 12 yearsAbout 20 years
Space neededFloor space for the tankWall-hung, smaller footprint
UpkeepFlush and anode checkScale flush
Water supplyStored volumeHeats as it flows

Should you own your Rheem tank or rent one?

If you plan to stay for years, owning usually means you control repairs and replacement timing. If you want a predictable monthly line on your bill, a rental may appeal. We make no statements about any rental provider, so read your own agreement and compare it with a flat-rate repair quote from us.

Leak, gas smell or alarm: what to do first

A leaking tank needs the cold water valve on top closed, and then a call to us. Smell gas? Go outside and phone Enbridge Gas at 1-866-763-5427. If a carbon monoxide alarm sounds, everyone gets out and you call 911.

Booking a Rheem water heater repair visit

We give a two-hour window for booked visits and text before arriving. Every repair carries a written workmanship warranty. From Markham and Richmond Hill to Mississauga, our technicians are out day or night when the hot water is gone.

Not sure which area page fits you? Start at HVAC contractor in Markham or get in touch.

Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Rheem. Brand names are trademarks of their owners.

FAQ

Rheem water heater repair questions

Who owns Rheem?

Rheem Canada’s site describes Rheem Manufacturing Company, founded in 1925, with sister brands such as Ruud, Richmond and EcoSmart. Rheem itself is an independent subsidiary of Paloma Industries. We are an independent contractor and not affiliated with Rheem or any of its brands.

Do I need my serial number to check a Rheem warranty?

Yes. Rheem Canada’s warranty page says your serial number is required to verify a warranty, and that registering a product extends coverage. Photograph the rating label and keep your receipt. We do not quote warranty lengths, since the maker is the only reliable source.

What does a Rheem error code mean?

On Rheem’s Canadian power vent and power direct vent tanks, the self-diagnostic control shows a fault as a pattern on its six temperature lights, and the manual lists each pattern. For example, ●○○●●○ means the system is in lockout, and the first cause listed is a gas supply that is off or too low. Our table above has the common patterns. Book a repair if one stays.

Why is my Rheem water heater making popping noises?

Popping or rumbling usually means sediment on the bottom of the tank trapping steam bubbles. A flush often quiets it. If the tank is old and heavily scaled, the noise may be a sign it is nearing the end, and we will compare repair and replacement for you.

Can you fix a Rheem tank that has no hot water at night?

Yes. We are open 24/7 and technicians go out day or night for no-hot-water calls. You still get a flat-rate price to approve before work begins. If the fix needs a part we do not have, we explain the options and a safe way to wait.

Is a Rheem tankless unit worth repairing?

Usually yes. Tankless units typically run about 20 years, and the common faults, scale, venting and flow, are fixable. We inspect the heat exchanger, vent and condensate path, then give you a flat-rate quote. If the heat exchanger is badly damaged, we will say so.

Does a Rheem power vent water heater need power?

Yes. Power vent models use a fan to push exhaust out, so a power cut or tripped breaker can stop the burner while gas is still flowing. Check the plug and breaker. If both are fine and the fan runs without ignition, a technician should check the vent and pressure switch.

Book a visit

Need Rheem water heater repair? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy