
When hot water smells like rotten eggs, the smell is almost always coming from the tank, not from your pipes or your gas line. Bacteria and the tank’s anode rod are the usual cause, and the fix is rarely a new heater. This guide explains how to confirm the source, how to tell it from a real gas smell, and when to book water heater repair.
Key takeaways
- A rotten egg smell only from the hot tap points to the water heater tank.
- Bacteria feeding on the anode rod in warm water make the smelly gas, hydrogen sulfide.
- Smell in the air near a gas appliance is different: leave and call Enbridge Gas.
- Never remove an anode rod yourself. A technician can replace it or fit a powered one.
- Technicians are TSSA-certified, and you approve a flat-rate price before work starts.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- Why hot water smells like rotten eggs
- When hot water smells like rotten eggs only from the hot tap
- Rotten egg smell or a gas leak?
- Why hot water smells like rotten eggs: the anode rod and bacteria
- How a technician fixes hot water that smells like rotten eggs
- Replacement and powered anode rods
- Flushing the tank as a first step
- What not to do about a smelly tank
- Gas, carbon monoxide and scald safety
- What a technician checks on a smell call
- Keeping the smell from coming back
- Hot water smells like rotten eggs: common questions
Why hot water smells like rotten eggs
Hot water smells like rotten eggs when a gas called hydrogen sulfide forms in the tank. The gas comes from sulfate-reducing bacteria that occur naturally in many water supplies and thrive in the warm, still conditions of a tank, especially when the anode rod gives them something to react with.
The smell is unpleasant but doesn’t mean the heater is failing. It does mean something inside the tank is out of balance, and it usually comes back unless the cause is dealt with.
When hot water smells like rotten eggs only from the hot tap
A simple test separates a water heater problem from a supply or drain problem. Run the cold tap for a minute, fill a glass and smell it away from the drain. Do the same with the hot tap. A smell only in the hot water points to the tank.
- Smell only in hot water: the water heater, usually bacteria and the anode rod.
- Smell in both hot and cold water: the water source or the plumbing, not the heater.
- Smell only at the drain: a dry trap or a drain problem, not the water itself.
- Smell in the air around the heater or furnace: treat it as gas until proven otherwise.
Rotten egg smell or a gas leak?
Natural gas is given a rotten egg smell on purpose, so people notice a leak. That means a smell like rotten eggs in the air, rather than in a glass of water, may be gas. If you notice it near the water heater, furnace, stove or meter, treat it as a gas leak and don’t wait to sort it out.
Leave the house right away without flipping switches or lighting anything, and don’t use a phone inside. From outside, call Enbridge Gas at 1-866-763-5427. Only when the smell is clearly in the water itself and the air is clear should you treat it as a tank problem.
Why hot water smells like rotten eggs: the anode rod and bacteria
Every tank has an anode rod, a metal rod, usually magnesium or aluminum, that corrodes in place of the steel tank. As the rod gives up its metal, it protects the tank from rust. The same reaction can feed sulfate-reducing bacteria and give off hydrogen sulfide.
A tank that sits at a lower temperature, stays unused for a stretch or has a heavily worn rod is more likely to smell. The smell often starts after a vacation or a long stretch without use.
How a technician fixes hot water that smells like rotten eggs
The fix depends on the cause, and a technician usually works through several options in order. Each addresses either the bacteria or the rod’s reaction, so the right choice depends on the age of the tank and what is found inside it.
| Fix | What it does | Who does it |
|---|---|---|
| Flush the tank | Clears sediment bacteria can live in | You, with care, or a technician |
| Disinfect the tank | Kills the bacteria in the tank | Technician |
| Replace the anode rod | Removes the worn rod that feeds the reaction | Technician |
| Fit a different or powered anode | Gives less for the bacteria to react with | Technician |
| Replace the tank | Starts fresh when the tank is old and corroded | Technician |
Replacement and powered anode rods
A standard replacement rod may stop the smell if the old one was heavily worn. Some technicians fit an aluminum and zinc alloy rod, which reacts less with the bacteria, or a powered anode rod, which uses a small electric current rather than a sacrificial metal.
Anode work is a technician job. The rod is screwed into the top of the tank under pressure, can be seized and, on some models, needs the tank partly drained. Don’t remove one yourself, because a rod pulled the wrong way can damage the tank.
Flushing the tank as a first step
A flush clears the sediment layer at the bottom of the tank, which is where bacteria collect. It’s one of the few steps a homeowner may take, but only with the gas control set to off or the power switched off, after the tank cools and with a hose to a floor drain.
Our how to flush a water heater guide covers the steps and when to stop. A flush alone doesn’t always cure the smell, but it can reduce it, and it helps the tank in other ways.
What not to do about a smelly tank
A few common fixes found online cause more trouble than the smell. Pouring things into a gas appliance, working on the rod or turning the temperature up as a quick cure all carry risks. Keep to the safe steps and leave the rest to a technician.
- Don’t pour bleach, peroxide or any chemical into the tank or the burner area.
- Don’t remove the anode rod yourself.
- Don’t raise the temperature setting well above its usual level, which risks scalds.
- Don’t open the sealed burner area or the electrical covers.
- Don’t ignore a smell in the air near a gas appliance.
Gas, carbon monoxide and scald safety
A gas water heater burns fuel inside your home, so keep safety in view whenever you investigate a smell. If you smell gas in the air at any time, leave and call Enbridge Gas from outside. Don’t return until the gas company says it’s safe.
- CO alarm sounding with a smelly tank: step outside with the family and pets, and call 911.
- Carbon monoxide alarms are required beside sleeping areas and on every storey in Ontario homes that have a fuel-burning appliance, a fireplace or an attached garage.
For more on spotting a gas leak, see Enbridge’s natural gas safety (opens in a new tab) page.
What a technician checks on a smell call
A TSSA-certified gas technician starts by confirming the smell’s source with the same hot and cold test, then checks the tank’s temperature setting, the condition of the anode rod and the sediment inside. The technician also checks for a gas smell near the unit.
A flat-rate price comes first, you decide whether to go ahead, and our written workmanship warranty backs any repair. If you’re weighing a different type of heater, see our tankless water heaters page.
Keeping the smell from coming back
A smell that is cured can return, especially if the cause was a worn rod or a tank left idle. Run hot water through the taps if the house has been empty for a while, have the tank flushed on a regular schedule and replace the anode rod when a technician advises it. Our maintenance plan carries two tune-ups every year.
Hot water smells like rotten eggs: common questions
Why does my hot water smell like rotten eggs but not the cold?
It points to the water heater. Bacteria in the warm tank react with the anode rod and release hydrogen sulfide, which you smell in the hot water only. Cold water that smells fine rules out the source and the plumbing, and shows the tank as the place to look.
Is hot water that smells like rotten eggs safe to use?
The smell is usually a nuisance caused by the tank rather than a sign of a failing heater. If you’re worried about water quality, contact your municipality. Separately, a rotten egg smell in the air near a gas appliance may be gas, and then you should leave and call Enbridge Gas.
Can I fix a smelly water heater by flushing it?
Flushing helps because it clears the sediment bacteria live in, but it doesn’t always cure the smell. Flush only with the gas control set to off or the power off, after the tank cools, with a hose to a floor drain. If the smell comes back, the anode rod or the tank needs attention.
Should I remove the anode rod myself?
No. The rod is tightly threaded into the top of the tank, can be seized in place, and pulling it wrongly can damage the tank. A technician checks its condition, replaces it or fits a different or powered rod, and tells you whether that is likely to solve the smell.
Why did the smell start after a vacation?
Water that sits in a warm tank for days gives bacteria time to multiply and make hydrogen sulfide. After a trip, the smell is often strongest on the first use. Running hot water for a few minutes can clear it, and a flush can help if it lingers.
Does turning up the water heater temperature stop the smell?
Raising the setting can reduce bacteria, but it also raises the risk of scalding, and water heaters are commonly set around 49°C at the tap for that reason. Don’t make that change on your own. A technician can disinfect the tank and fix the cause safely.
Will I need a new water heater if the smell won’t go away?
Usually not. Most smells are fixed with a flush, a disinfection or a new anode rod. A new tank makes sense when the tank is old, corroded or leaking. We give a flat-rate price for the repair and for replacement so you can compare.
Who fixes smelly hot water in the GTA?
If you’re in Toronto, North York, Vaughan, Markham, Richmond Hill, Mississauga or Oakville, our TSSA-certified gas technicians can look at a smelly tank. All major brands are serviced, calls are answered 24/7, and the flat-rate price is yours to approve before any repair begins.
Still no hot water? We’ll call you back to book a technician.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
