Skip to content
Heating equipment and storage tanks in a utility room
Assurance HVAC Heating & Cooling, serving Aurora

Furnace installation in Aurora

(647) 692-0819Open 24/7, day or night

Assurance HVAC Heating & Cooling handles furnace installation in Aurora for homes of every age, with technicians across town. Every quote starts with a heat-loss calculation of your house, not a copy of the old nameplate, and you approve a flat-rate price before we begin. If your furnace is still running but costing you in repairs, compare it with furnace repair in Aurora first.

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • New and replacement gas furnaces installed in Aurora by TSSA-certified technicians.
  • Sizing comes from a heat-loss calculation of your house, not the old furnace.
  • You approve one flat-rate price before work, and the installation has a written warranty.
  • We handle the permits and inspections the job needs, and haul away the old furnace.
  • Send a request or call the main line to book a quote visit.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Time for furnace installation in Aurora? Look for these signs
  2. Why we size with a heat-loss calculation
  3. Furnace efficiency: AFUE, condensing models and stages
  4. Furnace installation in Aurora’s heritage homes
  5. Replacing a furnace in newer Aurora homes and townhouses
  6. Ductwork and venting checks before the new furnace goes in
  7. Pairing a new furnace with a cold-climate heat pump
  8. Installation day: what the crew does in your home
  9. Gas and carbon monoxide safety with a new furnace
  10. What furnace installation in Aurora costs, and what changes it
  11. When we tell you not to replace the furnace
  12. Looking after a new furnace
  13. Furnace installation questions from Aurora homeowners

Time for furnace installation in Aurora? Look for these signs

A gas furnace typically lasts 15 to 20 years, so it’s time to think about replacement when yours is in that range and starting to need repairs. Rising heating bills, uneven rooms in your Aurora home, a cracked heat exchanger or a major failed part are all signs that a new furnace may be better value than another repair.

  • The furnace is 15 to 20 years old or more
  • Repairs are getting more frequent or more expensive
  • A technician has found a cracked heat exchanger
  • Some rooms are always too cold or too hot
  • The furnace is noisy, short cycles or runs nonstop
  • You plan to add an AC or heat pump and want a matched system

Why we size with a heat-loss calculation

A heat-loss calculation measures how much heat your home actually needs on the coldest days, using its size, insulation, windows, air leakage and layout. It tells us the right furnace capacity. Copying the old unit’s size often means buying too much or too little, because homes change over time.

Oversized furnaces cycle on and off too quickly, wear out sooner and leave rooms uneven. Properly sized ones run longer at steadier output. New windows, extra insulation or a finished basement all change the answer, which is why we measure before we quote.

Furnace efficiency: AFUE, condensing models and stages

AFUE measures how much of the fuel a furnace turns into heat. Condensing, high-efficiency furnaces are 90% AFUE or higher, which means less of what you pay for goes up the vent. They also use plastic venting and a condensate drain, so the installation is different from an older mid-efficiency furnace.

Furnace types compared
TypeHow it runsBest for
Single-stageOne heat output, on or offSmaller homes and simpler budgets
Two-stageLow output most of the time, high on the coldest daysEven temperatures and quieter running
ModulatingAdjusts output in small steps to match demandSteadiest comfort and lowest running cost

Pair any of them with an ECM variable-speed blower and you get quieter air movement and better humidity control in summer when the AC is running.

Furnace installation in Aurora’s heritage homes

Northeast Old Aurora’s late 19th and early 20th century houses, from Ontario Victorian Vernacular to Craftsman bungalows, are far older than any furnace on sale today. In a house that age, the heating equipment, ducts and venting may have been changed several times, so we check what is actually there.

Before we quote, we go over where the furnace sits, how it will vent, how existing ducts reach each room and where a future AC’s outdoor unit could go. In a house this age, planning the layout is a big part of a good installation. Check the Town of Aurora website (opens in a new tab) if your property is in the heritage district and you plan visible exterior changes.

Replacing a furnace in newer Aurora homes and townhouses

Newer building here reaches east of Industrial Parkway toward Highway 404, from the early 21st century, and west of Leslie Street, where detached homes, townhouses and condominium apartments went up in the late 2010s. If the furnace in a newer home is failing early, we look at why before we replace it, since a venting, drainage or airflow issue can damage a new furnace too.

Newer homes may have a furnace already matched to an AC or heat pump, so we check that a replacement still works with the outdoor unit and coil. For townhouses and condominiums, confirm with your board or property manager first if the work affects shared walls or exterior vents.

Ductwork and venting checks before the new furnace goes in

A new furnace in Aurora, as anywhere, can only deliver what the ductwork lets through. We check the supply and return ducts for undersized runs, leaks and blocked returns, and we confirm the venting and combustion air path match the new furnace. Fixing duct problems at installation costs far less than living with them for 15 years.

  • Return air that is large enough for the new blower
  • Leaks and disconnected joints in accessible duct runs
  • Condensate drain route and a safe way to dispose of it
  • Vent and intake pipe routing, size and termination points
  • Gas line size and shut-off valve

Pairing a new furnace with a cold-climate heat pump

A cold-climate heat pump can work alongside a gas furnace as a hybrid or dual-fuel system, covering milder weather with the heat pump and switching to the furnace on the coldest days. It also provides the cooling, so it can replace the central AC at the same time.

Whether that’s worth it in Aurora depends on your home and your goals. The Home Renovation Savings Program from Save on Energy and Enbridge Gas is the one open rebate for heat pumps, and eligibility depends on your home and current heating fuel. See our rebates page and the Home Renovation Savings Program (opens in a new tab) for the current details.

Installation day: what the crew does in your home

A straightforward furnace installation in Aurora is typically a one-day job, though we don’t promise times, because older houses can reveal surprises behind the old furnace. Our technicians protect floors, shut off the gas and power, remove the old furnace and set the new one level and connected.

  • Old furnace disconnected and removed
  • New furnace set, with gas, vent, intake and condensate connected
  • Ducts, coil and electrical connections made and checked
  • Gas pressure, combustion and safety controls tested
  • Thermostat set up, and the system explained to you

We handle the permits and inspections the job needs, and you receive a written workmanship warranty.

Gas and carbon monoxide safety with a new furnace

Before the crew leaves, the new furnace’s gas pressure, combustion and venting are tested. Make sure the house has working carbon monoxide alarms, which Ontario requires next to every sleeping area and, since January 1, 2026, on every storey of homes with a fuel-burning appliance, a fireplace or an attached garage.

Should you ever notice a gas smell, get out without using switches or flames and phone Enbridge Gas on 1-866-763-5427 once outside. A sounding CO alarm means everyone leaves and someone calls 911.

What furnace installation in Aurora costs, and what changes it

Furnace installation cost in Aurora depends on the model, the work around it and the condition of the existing system. We give you a flat-rate price after a quote visit, so you know the whole cost before any work begins. Here is what moves the price up or down.

What changes the price of a furnace installation
FactorWhy it matters
Efficiency and stagesCondensing, two-stage and modulating models cost more upfront and less to run.
Furnace capacityA heat-loss calculation sets the size, and larger homes need larger units.
Venting and condensateMoving or replacing vent pipes and drains adds parts and labour.
Ductwork changesFixing returns or leaks adds work, but improves comfort.
AC or heat pump at the same timeDoing both together saves a second installation.

When we tell you not to replace the furnace

Not every old furnace needs replacing. If the heat exchanger is sound and the fault is something like an igniter or flame sensor, repair is often the better value, and we say so. Our honest assessment is part of the quote, not an upsell.

If you’re unsure, start with a diagnosis. We’ll show you what we find, give you both prices and let you decide. Our HVAC contractor in Aurora page explains how a visit works from request to warranty.

Looking after a new furnace

A new furnace lasts longest in Aurora when it’s maintained. Change the filter on schedule, keep vent pipes clear of snow and book a yearly tune-up. Ontario doesn’t require annual furnace maintenance by law, but many manufacturer warranties ask for proof of it, so check your warranty papers.

Our maintenance plan covers two tune-ups a year and priority booking, which suits a new system just as well as an old one.

FAQ

Furnace installation questions from Aurora homeowners

How long does a gas furnace last?

A gas furnace typically lasts 15 to 20 years, depending on how it’s sized, installed and maintained. Past 15 years, repairs tend to become more frequent and bigger. That’s a good time to compare repair and replacement costs, rather than waiting for a failure in the middle of winter.

How is the right furnace size worked out for my house?

We do a heat-loss calculation using your home’s size, insulation, windows, air leakage and layout. It gives the heat the house needs on a cold day. We don’t just match the old furnace, because renovations, new windows or extra insulation may have changed what your home needs.

How efficient is a new gas furnace today?

Nearly all new gas furnaces sold in Canada are high-efficiency condensing models, rated 90% AFUE or higher, so more of the fuel becomes heat. That means plastic venting and a condensate drain, which we plan for on every installation. Running costs depend on your home, its size and insulation and how you use the heat, so we show you the options and how each one is vented.

Do I need to replace my AC when I replace my furnace?

Not always, but it’s worth checking. The furnace blower moves air for the AC, so the two need to work together. If your AC is 12 to 15 years old, replacing both can save a second installation. If it has good years left, we make sure the new blower matches it.

Can you replace a furnace in a heritage home in Northeast Old Aurora?

Yes. We go over the furnace location, venting, duct runs and a possible future AC location before quoting. Older houses often have ducts and vents that were added later, and we plan around them. If your property is in the heritage district, check the Town of Aurora for rules on exterior changes.

Is there a rebate if I add a heat pump?

If you’re open to a cold-climate heat pump, on its own or paired with a new furnace, the Home Renovation Savings Program from Save on Energy and Enbridge Gas is the open program. What you can get depends on your home and current heating fuel, so we quote no amounts. Our rebates page keeps the details current.

Do you handle permits and the old furnace?

Yes, for every Aurora job. We handle the permits and inspections the job needs and remove the old furnace when we’re done. You don’t have to chase paperwork or arrange disposal. You receive a written workmanship warranty on the installation, and the price you approved before work is the price you pay.

How do I get a furnace installation quote in Aurora?

Send the request form or call the main line. We serve Aurora with technicians who come to your home, from Aurora Village, Aurora Heights and Aurora Highlands to Bayview Northeast and the Hills of St Andrew. We book a two-hour window, text you when the technician is on the way and give you a flat-rate price before any work begins. Newmarket, the next town north, has its own page on furnace installation in Newmarket.

Book a visit

Need furnace installation in Aurora? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy