
Furnace installation in Newmarket
(647) 692-0819Open 24/7, day or night
A new furnace should be chosen for your house, not matched to the old one. Our furnace installation in Newmarket starts with a heat-loss calculation, then a clear flat-rate price for the unit you pick. TSSA-certified technicians install it, and a written workmanship warranty backs the work. Already have a fault? See furnace repair first.
Key takeaways
- Every new furnace is sized from a heat-loss calculation of your home.
- TSSA-certified gas technicians install it, and we handle the permits and inspections.
- You approve a flat-rate price before any work starts.
- Single-stage, two-stage and modulating models, with high-efficiency options.
- Installation comes with a written workmanship warranty.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- When is it time for furnace installation in Newmarket?
- Sizing comes first for furnace installation in Newmarket
- High-efficiency furnaces explained: AFUE and condensing models
- How many stages should a new furnace have?
- Venting, condensate and ductwork checks
- Furnace installation in Newmarket from start to finish
- Pairing a furnace with a heat pump
- Price factors behind a new furnace in Newmarket
- New furnaces across Newmarket neighbourhoods
- Furnace installation near Main Street South and the heritage district
- Furnace replacement or repair first? Making the call
- Choosing a new furnace without the sales pressure
- Safety after a furnace installation
- Looking after your new furnace
- Get a furnace installation quote in Newmarket
- Furnace installation questions from Newmarket homeowners
When is it time for furnace installation in Newmarket?
Consider replacement in Newmarket when the furnace is past 15 years old and needs a major part, when repairs keep coming back, or when the heat exchanger cracks. Gas furnaces typically last 15 to 20 years, so age is the first clue.
- The furnace is past 15 years and the repair is a major one.
- Two or three repairs in the last couple of years.
- A cracked or corroded heat exchanger, which is a safety issue.
- Rooms that are hot or cold regardless of the thermostat setting.
- Rising heating bills with no change in how you use the house.
Sizing comes first for furnace installation in Newmarket
A furnace must match the heat your Newmarket house loses on the coldest days. Too big, and it short cycles and wastes fuel. Too small, and the house never catches up. We use a heat-loss calculation instead of guessing from the old unit’s size.
The calculation looks at the size of the house, insulation, windows and air leakage, and the ductwork it has to push air through. Homes in Newmarket were built across several waves, from the 1950 to 1970 boom to the streets that followed Highway 404 east, so the same furnace size doesn’t suit every house.
High-efficiency furnaces explained: AFUE and condensing models
AFUE measures how much of the fuel a furnace turns into heat. Condensing furnaces reach 90% AFUE or higher, and many high-efficiency models reach 95% or more. They capture extra heat by condensing water vapour out of the exhaust; the water leaves through a condensate drain and the cooled exhaust vents through plastic pipe.
A higher AFUE usually means a higher purchase price and lower fuel use over time. We show you the options and explain the trade-off, and we don’t push the most expensive model. You can also check ENERGY STAR Canada through Natural Resources Canada (opens in a new tab) for qualifying models.
How many stages should a new furnace have?
Single-stage furnaces run at full output, two-stage models add a lower setting, and modulating furnaces adjust their output in small steps. More stages generally means longer, quieter, steadier heating and fewer cold spots.
| Type | How it runs | Best for |
|---|---|---|
| Single-stage | Full output or off | Smaller homes and tighter budgets |
| Two-stage | Low setting most of the time, high on cold days | A balance of comfort and cost |
| Modulating | Output adjusts in small steps | Even temperatures and the quietest running |
Most two-stage and modulating models pair with an ECM blower, which moves air more efficiently.
Venting, condensate and ductwork checks
The furnace is only part of the system. We look at venting, the condensate drain and your ducts, because a new furnace pushing air through restricted or leaky ducts won’t perform as promised.
Venting and combustion air
High-efficiency furnaces vent through plastic pipe, often out a side wall. We confirm the route and the intake before quoting.
Condensate drain
A condensing furnace produces water that must drain safely. We check the drain path and the condensate pump if one is needed.
Ducts and returns
We look for crushed ducts, undersized returns and obvious leaks, since airflow affects comfort and how long the blower lasts.
Furnace installation in Newmarket from start to finish
On installation day the crew removes the old furnace, sets and connects the new one, runs the venting, gas and electrical connections, then tests everything. A straight swap is often completed in a day, though we don’t promise a time because every house differs.
Before leaving, the technician starts the furnace, checks gas pressure and combustion, and shows you the thermostat and filter. We handle the permits and inspections the job needs, and you receive the written workmanship warranty.
Pairing a furnace with a heat pump
A cold-climate heat pump can share the load with a gas furnace in a hybrid setup, handling milder days while the furnace covers the coldest ones. It also provides cooling, so it can replace an air conditioner.
Rebates for heat pumps run through the Home Renovation Savings Program from Save on Energy and Enbridge Gas, and the amount depends on your home and heating fuel. See our heat pump rebates page for the official links.
Price factors behind a new furnace in Newmarket
The price depends on the furnace you choose and the work around it. We don’t publish prices, because the same model can be a different job in different houses. You get a flat-rate price before anything starts.
| Factor | Why it matters |
|---|---|
| Efficiency and stages | Condensing, two-stage and modulating models cost more upfront. |
| Size and output | A bigger heat loss needs a larger furnace. |
| Venting changes | A new vent route or side-wall exit adds labour. |
| Ductwork | Repairs or new returns add to the job. |
| Extras | Thermostat, humidifier or filter upgrades are added if you choose them. |
New furnaces across Newmarket neighbourhoods
We install furnaces in Central Newmarket and the Historic Downtown, Armitage, Bogarttown, Bristol-London, Gorham-College Manor and Huron Heights-Leslie Valley. We also serve Glenway Estates, Summerhill Estates, Woodland Hill and Stonehaven-Wyndham.
Whichever Newmarket neighbourhood you live in, the visit follows the same steps: look at the house, run the numbers, quote a flat price, install. South of town, we also handle furnace installation in Aurora.
Furnace installation near Main Street South and the heritage district
If your home is in or near the Lower Main Street South Heritage Conservation District, tell us when you book. We go over vent and outdoor unit locations with you before quoting, so there are no surprises about where equipment goes.
We don’t advise on heritage approvals. The Town of Newmarket (opens in a new tab) can tell you whether your project needs one.
Furnace replacement or repair first? Making the call
If the furnace still has life in it, a repair can be the better value, and we say so, even when you were planning on furnace installation in Newmarket. Replacement makes sense when the cost of fixing it, and the chance of the next failure, outweigh the price of a new unit. We always put both numbers on the table.
A fault on a furnace under 15 years old is usually worth fixing. A cracked heat exchanger is not. If you are unsure which side your furnace falls on, start with a diagnosis of the existing furnace. You are not committing to a new furnace by asking.
Choosing a new furnace without the sales pressure
We service all major brands, so we aren’t tied to a single line. The technician explains what matters in a furnace: efficiency, the number of stages, blower type, noise, and the manufacturer’s warranty terms, then lays out the options that suit your house in Newmarket.
Ask any contractor to put every option in writing, with the same scope, so you can compare like with like. You approve one flat-rate price, and nothing is ordered until you say yes.
Safety after a furnace installation
A new gas furnace should be tested for gas pressure, combustion and venting before the crew leaves. The technician shows you the shutoff, the filter and the thermostat so you know how to run it.
Ontario law has required CO alarms on every storey since January 1, 2026, on top of one next to each sleeping area, wherever a home has a fuel-burning appliance, a fireplace or an attached garage, so check yours after any gas work. If you smell gas, leave the house and call Enbridge Gas at 1-866-763-5427 from outside. If a carbon monoxide alarm sounds, get everyone outside and call 911.
Looking after your new furnace
A new furnace in Newmarket lasts longer with a yearly tune-up and a clean filter, so plan the first service when you plan the install. Our maintenance plan includes two tune-ups a year and priority booking.
Ontario doesn’t require yearly maintenance by law, but many manufacturer warranties ask for proof of regular service, so keep your records with the warranty papers.
Get a furnace installation quote in Newmarket
Send the request form or call the main line to start your furnace installation in Newmarket. We confirm a two-hour arrival window, assess the house and give you a flat-rate price. As an HVAC contractor in Newmarket, we show you options side by side and you decide.
Furnace installation questions from Newmarket homeowners
How long does a furnace last?
A gas furnace typically lasts 15 to 20 years, depending on use and upkeep. Once it is past 15 and needs a major repair, it is worth pricing a replacement alongside the repair. We give you both numbers and tell you which one we would pick.
How do you decide what size furnace I need?
We run a heat-loss calculation for your house in Newmarket, looking at its size, insulation, windows and ductwork. We don’t simply match the old furnace, because homes change over time with additions, new windows and finished basements, and the right size changes with them.
What efficiency should I expect from a new furnace?
Nearly every new gas furnace sold in Canada today is a high-efficiency condensing model, rated at least 90% AFUE, and some reach 95% or more. That means plastic venting and a condensate drain. What it costs to run depends on your house, so we lay out the options for your Newmarket home and you choose with real numbers.
Who arranges permits and inspections for a furnace install?
We do. We take care of the permits and inspections the job needs, so you aren’t left chasing paperwork or waiting on forms. TSSA-certified gas technicians serving Newmarket do the installation, and a written workmanship warranty covers the work once we leave.
How long does installing a furnace take in Newmarket?
A straight swap is often done in one day, but we don’t promise a set time because it depends on venting, ductwork and access. Your technician explains the plan and the likely timing before starting, so you know what to expect.
Can I add a heat pump when I replace my furnace?
Yes. A cold-climate heat pump can pair with a gas furnace as a hybrid system and also cool the house. The Home Renovation Savings Program is the open rebate, and what you get depends on your home and heating fuel.
Do you install all major furnace brands?
We service all major brands in Newmarket and help you pick equipment that suits the house rather than pushing one line. We compare models on efficiency, stages, noise and warranty so the choice is clear and you stay in control.
What does furnace installation cost in Newmarket?
It depends on the equipment, the size of the home, venting and ductwork. We give you a flat-rate price before work starts, and it doesn’t change partway through. You approve it before anything is ordered or installed, and you can ask us to explain any line of it.
Need furnace installation in Newmarket? We’ll call you back to book.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
