Skip to content
Technician servicing a wall-mounted boiler
Brands we repair

Weil-McLain boiler repair in Toronto

(647) 692-0819Open 24/7, day or night

Weil-McLain sells a wide spread of boilers, so Weil-McLain boiler repair begins with working out which line is on your wall or in your basement. Assurance HVAC Heating & Cooling services these boilers across Toronto and the GTA, using TSSA-certified gas technicians. For the bigger picture of what we do, see our boiler repair in Toronto page.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Weil-McLain sells many lines, so we first identify yours: ECO Tec, GV90+, Ultra and others.
  • An ECO Tec Series 3 shows LOCKOUT in red and names the fault on screen.
  • Its manual calls for an annual start-up by a qualified service technician before every heating season.
  • TSSA-certified gas technicians repair it, and you approve a flat-rate price first.
  • Open 24/7, with technicians out day or night for no-heat calls.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Weil-McLain: the brand, its owner and where it builds
  2. Which Weil-McLain do you have? A line-by-line look
  3. Stainless steel, cast iron or aluminum: why the material matters
  4. Weil-McLain boiler error codes on an ECO Tec Series 3
  5. What else the ECO Tec Series 3 brochure tells us
  6. Condensate drain and the yearly start-up
  7. Common Weil-McLain boiler repair jobs, from circulators to ignition
  8. Your CP number and warranty registration
  9. Weil-McLain boiler repair or replacement for an older boiler
  10. Safety and what to do while you wait
  11. Booking a Weil-McLain repair across the GTA
  12. Weil-McLain boiler repair questions

Weil-McLain: the brand, its owner and where it builds

SPX Technologies presents Weil-McLain as a brand in its HVAC segment, Hydronics, and dates it “since 1881.” SPX describes itself as based in Charlotte, North Carolina. SPX’s page is background only. Weil-McLain’s own site says it has manufactured in Michigan City, Indiana for over 100 years, with an additional manufacturing location in Eden, North Carolina. We mention this only for background; the pages we reviewed do not cover Canadian-specific details.

Which Weil-McLain do you have? A line-by-line look

The range matters because a cast iron boiler from the older end of the catalogue and a wall-mounted stainless steel combi fail in different ways. The maker’s site lists these residential gas and oil lines, and the line name is on your boiler’s label.

  • AquaBalance, CGa, CGi, EG and Evergreen Pro
  • ECO Tec, in Series 2 and Series 3
  • GV90+ and Ultra
  • Simplicity, the combi line
  • Oil-fired lines SGO, Ultra Oil, WGO and WTGO

We do not state which lines are condensing beyond what the maker publishes, because the pages we reviewed do not say it for every model.

Stainless steel, cast iron or aluminum: why the material matters

Weil-McLain’s product listing gives the heat exchanger material for several lines, and it shapes how we approach a repair. It lists ECO Tec, Evergreen Pro, AquaBalance and Simplicity as stainless steel, the GV90+ as cast iron, and the Ultra Series 4 as aluminum.

A cast iron section behaves differently from a stainless firetube when it ages, scales or is flushed. Knowing the material tells us how to treat the water side, what a leak means and whether the repair is worth doing.

Weil-McLain boiler error codes on an ECO Tec Series 3

The ECO Tec Series 3 names its faults instead of numbering them. Its user manual says that during a fault the status changes to LOCKOUT, the screen turns red and the fault name appears, with Low Water Cutoff as the example. You can select reset on the screen, and the manual says to call for service if the fault continues.

The names below come from the troubleshooting section of the ECO Tec Series 3 boiler manual (opens in a new tab), which covers the 80 to 199 MBH heat-only and combi sizes. The GV90+, Ultra, Evergreen Pro and other lines have their own manuals. Reset once, note the name, and treat it as a pointer to the part to test.

Common ECO Tec Series 3 fault names from Weil-McLain’s boiler manual
CodeWhat it meansWhat to do
LOW WATER or LWCO J9 OPENThe low water cutoff sensor sees no water; manual resetCheck the pressure gauge, then call a technician
LOW WTR CUTOFF WARNINGThe low water cutoff probe needs cleaning; clears on its ownBook a service visit
IGNITION 1 FAULTFive ignition attempts without a proven flame; manual resetReset once on screen; call a technician if it returns
IGNITION 2 FAULTFive ignition attempts without reaching the running flame levelBook a repair
LOW FLAME SHUTDOWNFlame quality fell below the running threshold but did not go outBook a repair
AIR PRESSURE Switch OpenThe high flue pressure switch is open; manual resetCall a technician
LIMIT OPENA manual or automatic reset limit has openedBook a repair
TEMP RISE TOO QUICKLYWater in the heat exchanger heated faster than 10°F per secondBook a repair
Supply 60F > ReturnOutlet water more than 60°F hotter than the inletBook a repair
Blower Fault 2The blower could not reach pre-purge or ignition speedBook a repair
Flue 1 Sensor OpenA flue temperature sensor reads as openBook a repair
Outdoor Sensor ErrorThe outdoor sensor is short or open; warning onlyBook a repair

Write down the fault name and what the boiler was doing when it appeared. Our TSSA-certified gas technicians check the control’s last six lockouts, then test the part the fault points to before replacing anything.

What else the ECO Tec Series 3 brochure tells us

The brochure describes a high-efficiency condensing boiler from 80 to 199 MBH, in four heat-only sizes and three combi sizes, rated 95% AFUE. It has a stainless steel firetube heat exchanger, a wall-mount design with an optional pedestal for floor-standing installs, and the Unity 2.0 touchscreen.

It also says a maintenance reminder can appear on the display with the contractor’s name and phone number, and that the boiler has a removable polypropylene condensate base. Those two details are useful at service time, so we check them during a visit.

Condensate drain and the yearly start-up

The ECO Tec Series 3 manual says to schedule an annual start-up by a qualified service technician before every heating season. It also says to check the condensate drain tubing and trap, and to contact a technician if there is a problem.

A trap that is partly blocked or tubing that sags can trigger nuisance lockouts on a condensing boiler. Our maintenance plan adds two tune-ups a year with priority booking, which suits that yearly start-up.

Common Weil-McLain boiler repair jobs, from circulators to ignition

Across the lines, repairs fall into the usual hydronic categories. We work through them from the quick checks outward, so you pay to fix the fault rather than a guess.

Common boiler repairs and the signs that point to them
SignLikely areaWhat we do
Lockout or a named fault on screenSafety control, sensor or condensate pathRead the fault, test the control, clear any blockage
Radiators hot in some rooms onlyZone valve or circulatorTest actuators and the pump
Pressure climbs when the boiler runsExpansion tankCheck the tank’s air charge
Burner starts, then shuts offFlame sensing or ignitionClean the sensor, test the igniter
Damp spot under the boilerJoint, relief valve or condensateFind the source before repairing

Your CP number and warranty registration

Weil-McLain’s homeowners page offers a CP# Lookup Tool that gives the manufacturing date and product information tied to your Consumer Protection number. It also says product registration activates your warranty.

We cannot say what coverage applies in Canada, because the pages we reviewed carry no Canadian-specific warranty rules. Keep your paperwork, note the CP number, and check Weil-McLain’s homeowners page (opens in a new tab) for current terms.

Weil-McLain boiler repair or replacement for an older boiler

Boilers last a long time when looked after, and condensing models are typically rated 90% AFUE or better. An old cast iron unit with a good heat exchanger can be worth repairing, but a leaking section or repeated failures changes that arithmetic.

  • A healthy, older cast iron boiler with one failed part is often worth repairing
  • A cracked or leaking heat exchanger usually points toward replacement
  • An efficiency gap matters if the fuel bill is the main complaint
  • Replacement means sizing to your home’s heat loss and radiators, not copying the old boiler

Whichever you choose, you see a flat-rate price for it before work starts.

Safety and what to do while you wait

Gas smell: leave the house and phone Enbridge Gas on 1-866-763-5427 from outside. Carbon monoxide alarm sounding: get everyone out and call 911. Water at the relief valve or a pressure gauge in the red: turn the boiler off and call us. Keep radiator valves open and do not try to open the boiler casing yourself.

Booking a Weil-McLain repair across the GTA

Tell us the line name, what the screen says and what stopped working. We confirm a two-hour arrival window by text, find the fault, and quote a flat-rate price you approve before any work starts. Our workmanship warranty is in writing.

Calls are answered 24/7, with technicians out day or night for no-heat emergencies. We serve Toronto, North York, Vaughan, Markham, Richmond Hill, Mississauga and Oakville, including through our Markham boiler repair page.

Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Weil-McLain. Brand names are trademarks of their owners.

FAQ

Weil-McLain boiler repair questions

What does a Weil-McLain boiler error code mean?

An ECO Tec Series 3 shows LOCKOUT on a red screen with a fault name rather than a number. Its boiler manual says IGNITION 1 FAULT means five ignition attempts without a proven flame, and LOW WATER means the low water cutoff sensor sees no water. The table above lists more. Reset once, and call for service if the fault continues.

How often should a Weil-McLain boiler be serviced?

The ECO Tec Series 3 manual says to schedule an annual start-up by a qualified service technician before every heating season. It also says installation and service must be performed by a qualified installer, service technician or the gas supplier. Other lines have their own manuals, so check yours.

What is a Weil-McLain CP number?

Weil-McLain’s homeowners page describes a CP# Lookup Tool that gives the manufacturing date and product information tied to your Consumer Protection number. Find the number on your paperwork, or ask our technician to locate it, and keep a photo of it with the model name and your installation date.

Should I register my Weil-McLain boiler?

Weil-McLain’s homeowners page says product registration activates your warranty. The pages we reviewed do not give Canadian registration rules, so check the maker’s site for current terms and keep your install paperwork. We do not do warranty work on the maker’s behalf, but we can document a fault.

Can you repair a cast iron Weil-McLain in an older Toronto home?

Yes. Our technicians work on Weil-McLain boilers across Toronto and the GTA, including older cast iron units serving radiators. The maker lists the GV90+ as cast iron. We test the failed part, check the system around it, and give you repair and replacement options with a flat-rate price.

My ECO Tec keeps locking out. Is it the condensate trap?

It can be. The manual says to check the condensate drain tubing and trap, and to contact a technician if there is a problem. A lockout can have other causes too, such as water level or ignition, so reset once, note the fault name and call us if it returns.

Do you service Weil-McLain boilers in Mississauga?

Yes, we cover Mississauga along with Oakville, Markham, Vaughan, Richmond Hill, North York and Toronto. Send the request form with the line name from the boiler, such as ECO Tec or GV90+, and what you are seeing, and we book the first available visit.

What does Weil-McLain boiler repair cost?

It depends on the line, the fault and the part. After diagnosis we give you a flat-rate price for the repair, and nothing starts until you approve it. Where replacement may be the better choice, we show both so you can decide with the numbers in front of you.

Book a visit

Need Weil-McLain boiler repair? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy