---
title: "Boiler repair in Markham | Assurance HVAC"
description: "Boiler repair in Markham for Unionville radiators, townhome combi boilers and heated floors. Licensed gas technicians and a flat-rate price you approve."
canonical: https://assuranceheatingandcoolinghvac.com/service-area/markham/boiler-repair/
last_updated: 2026-11-05
---

Assurance HVAC Heating & Cooling of Markham

# Boiler repair in Markham

[(647) 496-5598](tel:+16474965598) Open 24/7, day or night

Assurance HVAC Heating & Cooling of Markham handles boiler repair in Markham, from cast iron radiators in some older Unionville homes to combi boilers in townhome closets and in-floor radiant heat in some larger newer houses. TSSA-certified gas technicians track down the fault, explain it in plain terms and give you a flat-rate price before any work, and every repair carries a written warranty. For furnaces, air conditioning and the rest of the house, visit our [HVAC contractor in Markham](https://assuranceheatingandcoolinghvac.com/service-area/markham/) page.

[Call (647) 496-5598](tel:+16474965598) Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

## Key takeaways

- Radiators, combi boilers and heated floors repaired across Markham, from Unionville to Cornell.
- Licensed TSSA gas technicians with WSIB coverage and full insurance.
- A flat-rate price follows the diagnosis, and work starts only when you approve.
- No-heat calls answered 24/7; booked repairs get a two-hour window and a text.
- Every repair comes with a written workmanship warranty.

Last updated November 5, 2026. Written and reviewed by the Assurance HVAC Heating & Cooling of Markham service team.

Need a technician?

Flat-rate price before any work starts.
[(647) 496-5598](tel:+16474965598) Request a technician online

**On this page**

- Boiler repair in Markham across three generations of homes
- Is your boiler asking for help? Signals to watch
- Cast iron radiators in older Unionville houses
- Moving off the chimney: venting a new boiler in a heritage home
- Combi boilers in Cornell and Markham Centre closets
- Heated floors in Markham’s larger newer homes
- Parts that wear out: the usual Markham boiler repairs
- Boiler repair in Markham, from first call to a working system
- Low pressure, high pressure and constant bleeding
- Should an older boiler be repaired or replaced?
- Sizing and piping a new condensing boiler
- Boiler repair in Markham: price factors to know
- When to shut the boiler off, and when to leave the house
- Keeping a Markham boiler in shape between winters
- Boiler repair questions from Markham homeowners

## Boiler repair in Markham across three generations of homes

Boiler repair in Markham covers three generations of hydronic heat. Some older Unionville homes still run cast iron radiators, some townhomes in Cornell and Markham Centre tuck a combi boiler into a closet, and some larger newer houses warm their floors with tubing. Each type fails in its own way and needs its own diagnosis.

Most Markham homes heat with a furnace, including the post-1960s streets of Milliken and Thornhill and the big 1990s and 2000s subdivisions. If you’re not sure what you have, look at the equipment: pipes leaving the unit mean a boiler, sheet-metal ducts mean a furnace.

## Is your boiler asking for help? Signals to watch

Boilers give plenty of warning before they quit. Watch for rooms or floors that heat unevenly, new sounds from the boiler or pipes, a pressure gauge that won’t hold steady, water where it shouldn’t be, and a display that keeps showing the same code.

- Radiators with a cold upper half, or one radiator cold while the rest are hot
- A heated bathroom or basement floor that never reaches its usual warmth
- Pipes that tick and bang, or a boiler that sounds like a kettle
- A gauge that drops between top-ups or rises sharply as the burner fires
- Moisture at fittings, valves or the relief valve outlet
- No hot water from a combi, or a combi that locks out under heavy use

## Cast iron radiators in older Unionville houses

Some older Unionville homes still heat with cast iron radiators, and the radiators themselves are rarely the problem. They outlast the boilers that feed them; what wears out is the valves, the air vents, the piping and the balance between rooms, which is where most radiator repair work goes.

A cold radiator in the back bedroom may have a seized valve or too little flow, while a hissing vent or weeping valve stem needs a new part. Radiator homes seldom have ducts for central air, so ductless units are the usual cooling fix; see [heat pump installation in Markham](https://assuranceheatingandcoolinghvac.com/service-area/markham/heat-pump-installation/) for how they’re sized.

## Moving off the chimney: venting a new boiler in a heritage home

Older heritage homes in Unionville and Markham Village often have tight basements and masonry chimneys, and an older boiler may vent straight into that chimney. A condensing replacement vents through plastic pipe out a wall instead, so the route of that pipe and where it leaves the house are part of the plan from the start.

A gas water heater left alone on the chimney may need a liner to draft properly, and the boiler’s condensate needs a drain. Parts of Unionville, Markham Village and Thornhill are heritage conservation districts, so if a new vent would show from the street, check with the [City of Markham](https://www.markham.ca/) first.

## Combi boilers in Cornell and Markham Centre closets

Some townhomes and condos in Cornell and Markham Centre have a combi boiler in a compact mechanical closet, heating the home and the tap water from one wall-hung unit. Space is tight, so service access, venting clearances and the condensate drain all get checked along with the boiler itself.

Combi trouble usually shows up as hot water that runs warm then cold, no hot water while the heat still works, or a lockout code. Scale in the plate heat exchanger, a flow sensor, a diverter valve or a blocked condensate trap are the usual causes. If a tank or tankless heater makes more sense, see [water heater installation in Markham](https://assuranceheatingandcoolinghvac.com/service-area/markham/water-heater-installation/).

## Heated floors in Markham’s larger newer homes

Some larger newer Markham homes run in-floor radiant heat in basements, bathrooms or main floors, usually alongside a furnace for the rest of the house. Angus Glen, Cachet and Berczy Village have many large two-storey homes, and where one has heated floors, the tubing is fed by a boiler, a combi or sometimes a water heater.

Cold patches usually trace to a stuck actuator, a failed zone pump, a mixing valve set too low or air in a loop. A floor that runs too hot points to a mixing valve failing open or a missing floor temperature limit. We test from the manifold back to the boiler.

## Parts that wear out: the usual Markham boiler repairs

Whatever the type of system, the same small group of parts causes most hydronic breakdowns. Each one is tested before anything is replaced, and common ones ride on the truck, so many repairs are finished on the first visit.

### Circulators and zone valves

A circulator that hums but won’t turn, or a zone valve motor that has burned out, leaves part or all of the house cold while the boiler itself is hot. Both are routine swaps once tested.

### Expansion tank and relief valve

A waterlogged expansion tank lets pressure climb each time the boiler heats, until the relief valve lifts and drips. We recharge or replace the tank, and replace a relief valve that keeps weeping, since it’s the boiler’s last line of defence.

### Ignition, controls and trapped air

Igniters, flame rods, gas valves and control boards cause most lockouts and codes. Air, the other frequent fault, is purged from radiators and loops, and we fix whatever let it in.

## Boiler repair in Markham, from first call to a working system

Boiler repair in Markham begins with a short call or the request form, then a call back from a real person to book a two-hour arrival window. You get a text when the technician is on the way, a diagnosis explained in plain language, and a flat-rate price before work starts.

- Mention whether you have radiators, heated floors or a combi, and any code on the display.
- We test pressure, flow, temperatures, the burner, venting and every zone or radiator circuit.
- Approve the flat-rate price, or decline it, with no pressure either way.
- We make the repair, purge the system and recheck the safety controls.

## Low pressure, high pressure and constant bleeding

A healthy hot water system holds steady pressure for months. If yours needs topping up every few weeks, water is escaping somewhere; if it climbs whenever the boiler fires, the expansion tank has probably lost its cushion of air; and if radiators need bleeding again and again, fresh water is bringing new air in.

Cold readings on most home systems sit in the low to mid teens in psi, and most residential relief valves open at 30. Don’t keep adding water to a system that keeps losing it, because fresh water carries oxygen and minerals that corrode and scale the boiler from the inside.

## Should an older boiler be repaired or replaced?

If the boiler is solid and a wear part has failed, repairing it is usually the smart money. Replacement starts to make sense once the heat exchanger leaks, parts can’t be found, or an older non-condensing unit needs an expensive repair. In Markham’s heritage homes we also weigh how well the old boiler suits the radiators.

Repair or replace an older boiler
Question | Points to repair | Points to replace |
What failed? | A pump, valve, igniter or tank | The heat exchanger or a cracked section |
Can you get parts? | Yes, from stock or a supplier | Not for this model any more |
How efficient is it? | A condensing boiler in good order | An old atmospheric boiler venting up the chimney |
Does a combi make sense? | Your water heater is fairly new | Your tank is due as well |

## Sizing and piping a new condensing boiler

A new boiler is sized from a heat-loss calculation and, in a radiator home, a measurement of every radiator, which tells us what water temperature the house needs on the coldest day. Condensing boilers reach 90% AFUE or more, and they condense best when that temperature can stay low.

Large cast iron radiators often heat a room comfortably with cooler water than you’d expect, which suits a condensing boiler. Outdoor reset lowers the water temperature as the weather warms, a modulating burner trims its output to match, and new near-boiler piping with air and dirt separation protects the new heat exchanger from the old system’s sludge.

## Boiler repair in Markham: price factors to know

Boiler repair in Markham is priced per job, after the diagnosis, because the cost depends on the part, the type of boiler, the condition of the system and how easy the space is to work in. You hear the diagnostic fee on the phone and approve one flat-rate price before anything is replaced.

Factors that change the price of a boiler repair
Factor | What it means for the price |
Part and model | Common valves and pumps cost less than a model-specific control board or heat exchanger. |
System type | Radiators, floor loops and combis each involve different parts and testing. |
Working space | Tight heritage basements and closet installs take longer to work in. |
Water quality | A sludged system may need flushing before a new part will last. |

## When to shut the boiler off, and when to leave the house

Switch the boiler off at its service switch and call us right away if the relief valve is discharging, the gauge is in the red, or water is spreading across the floor. Leave the house first if you smell gas or a carbon monoxide alarm sounds, and make your calls from outside.

- Gas: don’t operate switches or light anything; once outside, call Enbridge Gas at 1-866-763-5427.
- Carbon monoxide: get everyone out and call 911, and don’t go back in to check the boiler.

The [province’s CO guidance](https://www.ontario.ca/page/carbon-monoxide-safety) is clear: a home with a fuel-burning appliance such as a gas boiler, a fireplace or an attached garage needs carbon monoxide alarms beside each sleeping area and, since January 1, 2026, on every storey. Once the house is cleared, we find out why the boiler failed before it runs again.

## Keeping a Markham boiler in shape between winters

One service visit a year, ideally in early fall, keeps a boiler reliable and efficient. We clean the burner and heat exchanger, analyze combustion, check the venting and condensate trap, test the relief valve and expansion tank, and run every radiator circuit or floor zone. A combi also gets its hot water side checked for scale.

Keep the service records, since many boiler warranties ask for proof of maintenance. Our [maintenance plan](https://assuranceheatingandcoolinghvac.com/maintenance-plan/) books the visit each year and moves you up the list when it’s busy.

FAQ

## Boiler repair questions from Markham homeowners

**Can you repair radiators in a heritage Unionville home without changing them?**

Yes. Cast iron radiators almost never need replacing; the repairs are to valves, air vents, piping and balance. We work carefully around plaster, wood floors and original trim, and if a valve has to be replaced, we choose one that fits the existing radiator and pipe sizes. The radiators stay where they are.

**Is a combi boiler right for a Cornell townhome?**

Often, if the household runs one or two showers at a time. A combi saves closet space by doing the job of both a boiler and a water heater. For bigger households, a boiler with an indirect tank or a separate water heater keeps up better. We look at your hot water use and gas supply before recommending either.

**Why does my combi boiler run hot water warm, then cold?**

Usually scale in the plate heat exchanger, a sticking flow sensor or a diverter valve that isn’t switching fully. Low gas pressure or a partly blocked condensate line can also make the burner drop out under load. A technician checks each in turn, and descaling the heat exchanger often restores steady hot water.

**What does a cold radiator at the end of the line mean?**

When radiators near the boiler heat and the farthest ones don’t, the system is short on flow or holding air. A weak circulator, a partly closed valve, sludge in the piping or poor balancing are the usual causes. Bleeding helps if it’s air; otherwise we check the pump and valves and balance the system.

**Can the boiler vent go out the front of a heritage house?**

It depends on the house and where the boiler sits. A condensing boiler can usually vent out a side or rear wall, keeping the pipe out of the street view. In heritage conservation districts, changes visible from the street can need approval, so check with the City of Markham before planning a front-facing vent. We’ll work out the route with you.

**Is boiler repair available in Markham Village or Milliken?**

Yes. We cover all of Markham, including Markham Village, Milliken, Unionville, Wismer, Greensborough, Box Grove, Cathedraltown and Buttonville, plus Richmond Hill and North York next door. Call the number on this page or use the request form. No-heat calls go to the front of the line and are answered 24/7.

**Should a leaking relief valve worry me?**

Yes. A relief valve opens to protect the boiler from too much pressure, so steady dripping means either the pressure is climbing, usually from a failed expansion tank or fill valve, or the valve itself is worn. Either needs a technician. If it’s discharging heavily or the gauge is in the red, switch the boiler off and call right away.

**Will you work on an older boiler someone else installed?**

Yes. We repair and service all major brands and ages, whoever installed them, from decades-old cast iron boilers to modern wall-hung condensing units and combis. If an older boiler’s parts are no longer made, we’ll tell you before quoting, and explain whether a substitute part or a replacement makes more sense.

Book a visit

## Need boiler repair in Markham? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

[(647) 496-5598](tel:+16474965598)

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

For AI agents: [site summary](https://assuranceheatingandcoolinghvac.com/llms.txt), [full text](https://assuranceheatingandcoolinghvac.com/llms-full.txt), [sitemap](https://assuranceheatingandcoolinghvac.com/sitemap.xml).
