---
title: "Furnace repair in Aurora | Assurance HVAC"
description: "Furnace repair in Aurora by TSSA-certified gas technicians. We find the failed part and give you a flat-rate price to approve before any work begins."
canonical: https://assuranceheatingandcoolinghvac.com/service-area/aurora/furnace-repair/
last_updated: 2026-11-05
---

Assurance HVAC Heating & Cooling, serving Aurora

# Furnace repair in Aurora

[(647) 692-0819](tel:+16476920819) Open 24/7, day or night

Assurance HVAC Heating & Cooling handles furnace repair in Aurora on all major brands, with technicians across town, from Aurora Heights and Aurora Highlands to the Bayview communities and the Hills of St Andrew. A TSSA-certified gas technician finds the part that failed and prices the fix before touching it. If it’s the middle of the night in Aurora, go straight to [emergency furnace repair](https://assuranceheatingandcoolinghvac.com/service-area/aurora/emergency-furnace-repair/).

[Call (647) 692-0819](tel:+16476920819) Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

## Key takeaways

- Furnace repair across Aurora on all major brands, by TSSA-certified gas technicians.
- You get one flat-rate price after the diagnosis, and nothing is fixed until you approve it.
- Technicians are WSIB covered and insured, and every repair has a written warranty.
- No-heat calls are answered 24/7. Booked repairs come with a two-hour window and a text.
- Send a request or call the main line to book a technician in Aurora.

Last updated November 5, 2026. Written and reviewed by the Assurance HVAC Heating & Cooling service team.

Need a technician?

Flat-rate price before any work starts.
[(647) 692-0819](tel:+16476920819) Request a technician online

**On this page**

- Furnace repair in Aurora: signs you need a technician
- Furnace not working? Checks to make before you call
- The parts that fail most often in a gas furnace
- Why the heat exchanger matters on an older furnace
- Furnace repair in Aurora’s older homes and heritage streets
- Repairs in newer Aurora homes, townhouses and condominiums
- What happens on a furnace repair visit
- Repair or replace a furnace in Aurora?
- Furnace repair in Aurora: what affects the cost
- Which furnace brands do you repair in Aurora?
- Gas smell or carbon monoxide alarm: what to do
- Keeping your Aurora furnace out of the repair queue
- Furnace repair questions from Aurora homeowners

## Furnace repair in Aurora: signs you need a technician

Book furnace repair in Aurora when the house can’t hold the thermostat setting, the burners light and shut off again, or the furnace makes a sound it didn’t make last winter. Most of these early signs trace back to one worn part, and catching it early usually keeps the repair small.

- Cold air from the vents while the blower is running
- Burners that start, then cut out after a few seconds
- A whine, rattle or squeal when the furnace starts up
- Some rooms staying cold while others overheat
- A blinking status light, or water pooling near the base
- A furnace that runs constantly or cycles every few minutes

A yellow, lazy flame or soot around the cabinet is different. Shut the furnace off and call, because it can point to poor combustion.

## Furnace not working? Checks to make before you call

In Aurora, as anywhere, a few checks take minutes and don’t require opening the furnace: the thermostat, the filter, the service switch and breaker, and the outdoor vent pipes. Any one of them can stop a healthy furnace, so it’s worth ruling them out before you book a visit.

- Thermostat: set to Heat, a few degrees above room temperature, fan on Auto. A blank screen usually means dead batteries.
- Filter: if you can’t see light through it, replace it. A clogged filter overheats the furnace and trips the limit switch.
- Power: the service switch on or near the furnace, which looks like a light switch, and its breaker in the panel.
- Vents: on a high-efficiency furnace, clear snow or ice from the vent pipe ends outside by hand.
- Condensate: a high-efficiency furnace in Aurora can shut down if its drain line is blocked.

Leave the cabinet closed. In any Aurora house, if a status light is blinking, note the pattern before cutting power, since switching the power off can clear the code.

## The parts that fail most often in a gas furnace

Furnaces fail in a fairly predictable order, starting with the parts that heat up and cool down on every cycle. We follow the start-up sequence step by step so the part we replace is the one that stopped the heat, not the easiest one to guess.

Common furnace parts, how they fail and what you notice
Part | How it fails | What you notice |
Hot surface igniter | Cracks or weakens after thousands of cycles | Furnace clicks or hums but never lights |
Flame sensor | Coats with residue and stops sensing flame | Burners light, then shut off after a few seconds |
Inducer motor | Bearings wear or the motor overheats | Whine, rattle or no start-up at all |
Pressure switch | Sticks, or the hose or vent clogs | Furnace won’t begin the burner sequence |
Limit switch | Trips from poor airflow or fails itself | Furnace shuts off when hot, or cycles quickly |
Blower motor | ECM motors fail, or capacitors weaken on older ones | Weak airflow, or heat but no air movement |
Control board | Relays burn out or a power surge hits it | Furnace is dead or shows fault codes |
Condensate trap | Clogs with debris or scale | Water on the floor, or a shutdown |

Many of these are fixed that visit when the part is on the truck, and the diagnosis tells us which one you have. That’s what separates good furnace repair in Aurora from guesswork: the failed part gets replaced, not the one that happens to be in the van.

## Why the heat exchanger matters on an older furnace

The heat exchanger is the metal chamber that keeps combustion gases away from the air your family breathes. A crack is a safety problem, not just a repair, and it’s the one finding that moves the conversation from repair to replacement.

A technician checks it when a repair or tune-up calls for it. If it’s sound, you carry on with the smaller repair. If it isn’t, we show you what we found and explain your options, including the price of both.

## Furnace repair in Aurora’s older homes and heritage streets

Northeast Old Aurora is a heritage conservation district of late 19th and early 20th century houses. In any house that old, the heating equipment, ducts and venting may have been changed several times, which can mean awkward duct runs, tight equipment spaces and venting adapted over the years.

When we repair a furnace in a house like that, we look at the whole path: the vent, the ducts that reach the farthest rooms and how air returns. A furnace that struggles to heat a distant room is sometimes a duct problem, not a furnace problem.

## Repairs in newer Aurora homes, townhouses and condominiums

Development spread east toward Highway 404 in the early 21st century, and newer streets west of Leslie Street added detached homes, townhouses and condominium apartments in the late 2010s. Newer furnaces tend to be high-efficiency models, which rely on plastic vent pipes, a condensate drain and a more complex control board.

Those features bring their own faults, such as blocked drains, frozen vent terminations and sensor errors. If your system is still under a manufacturer warranty, tell us before we start, because the way a repair is documented can matter for a warranty claim.

## What happens on a furnace repair visit

A repair visit follows the same steps every time: we listen to what you’ve noticed, run the furnace through its start-up sequence, find the failed part and give you a flat-rate price before we do anything else. Nothing is repaired until you say yes.

- You send a request or call, and we book a two-hour arrival window.
- You get a text when the technician is on the way.
- The technician checks the filter, venting, gas supply, safeties and, where the repair calls for it, the heat exchanger.
- You approve one flat-rate price, then the repair starts.
- The system is tested, and the work comes with a written workmanship warranty.

## Repair or replace a furnace in Aurora?

Repair is usually right when the furnace is mid-life and the failed part is small. Replacement is usually right when a gas furnace is 15 to 20 years old and needs a major component, or has a cracked heat exchanger. We give you both prices and say which we’d pick.

When repairing makes sense and when replacing is better
Situation | Usually better to |
Furnace under 12 years old with a failed igniter or flame sensor | Repair |
Furnace over 15 years old needing an inducer motor or control board | Compare repair and replacement |
Cracked heat exchanger at any age | Replace |
A repair every winter for the last few years | Replace |
Furnace and AC both near the end of their lives | Replace as a matched set |

If replacement is on the table, our guide to [furnace installation in Aurora](https://assuranceheatingandcoolinghvac.com/service-area/aurora/furnace-installation/) explains sizing and efficiency.

## Furnace repair in Aurora: what affects the cost

The cost of furnace repair in Aurora depends on which part failed, how hard it is to reach and whether the repair can be finished in one visit. We don’t guess at a number over the phone. After the diagnosis you get a flat-rate price, and that’s what you pay.

What changes the price of a furnace repair
Factor | Why it matters |
The part itself | An igniter and a control board are very different parts, and so are their prices. |
Access | A furnace in a tight space takes longer to open up and service. |
Age and availability | Older models can need parts that take longer to source. |
One visit or two | Hard-to-find parts mean a second trip. |

## Which furnace brands do you repair in Aurora?

We service all major brands, and as an [HVAC contractor in Aurora](https://assuranceheatingandcoolinghvac.com/service-area/aurora/) we diagnose every one the same way. Furnaces share the same basic parts and start-up sequence, so a technician who understands how one works can diagnose another, and we work from the model’s own wiring diagram and fault-code chart.

## Gas smell or carbon monoxide alarm: what to do

If you smell gas, leave the house at once, don’t touch switches or flames, and call Enbridge Gas at 1-866-763-5427 from outside. If a carbon monoxide alarm sounds, get everyone out and call 911. Don’t re-enter until you’ve been told it’s safe.

Ontario requires carbon monoxide alarms next to each sleeping area and, since January 1, 2026, on every storey of a home with a fuel-burning appliance, a fireplace or an attached garage, so a gas furnace means you need working ones. The [Ontario carbon monoxide safety page](https://www.ontario.ca/page/carbon-monoxide-safety) explains where to place them.

## Keeping your Aurora furnace out of the repair queue

A fall tune-up cleans the burners and flame sensor, tests the safeties and checks gas pressure, which is exactly where many repairs begin. Ontario doesn’t require yearly furnace maintenance by law, but many manufacturer warranties ask for proof of it, so check your paperwork.

Our [maintenance plan](https://assuranceheatingandcoolinghvac.com/maintenance-plan/) is open to Aurora homeowners and includes a furnace tune-up in the fall, an AC tune-up in the spring and priority booking. Between visits, change the filter on schedule and keep vent pipes clear of snow.

FAQ

## Furnace repair questions from Aurora homeowners

**What makes a furnace blow cold air?**

The most common causes are a flame sensor that has stopped sensing flame, a clogged filter that tripped the limit switch, or a thermostat set to On instead of Auto. Check those first. If the burners keep shutting off, a technician should clean or replace the sensor and look at airflow.

**My furnace won’t turn on. What should I check?**

Confirm the thermostat is on Heat and above room temperature, replace its batteries, and check the furnace’s service switch and the breaker. Make sure the furnace’s front panel is fully closed, since a door safety switch stops most furnaces from running without it. If it still won’t start, a failed igniter or control board is likely.

**How do I get furnace repair in Aurora?**

Assurance HVAC Heating & Cooling provides furnace repair in Aurora with technicians who come to your home. Send the request form or call the main line, and we’ll book a two-hour arrival window. If you have no heat, say so, because no-heat calls go ahead of routine work. We cover Aurora Village, Aurora Estates, Aurora Grove and Bayview Wellington along with the rest of town. Homes just north are covered by [furnace repair in Newmarket](https://assuranceheatingandcoolinghvac.com/service-area/newmarket/furnace-repair/).

**Do you repair furnaces in Northeast Old Aurora?**

Yes. Houses in the heritage district date from the late 19th and early 20th centuries, so we look at vent routes, duct paths and equipment space as part of the repair. We explain what we find before you approve any price, whatever the age of the house.

**Can you tell me the cost of a furnace repair before it starts?**

It depends on the part, how accessible it is and whether we can finish in one visit. We don’t quote a number before diagnosing, because guesses are often wrong. After the diagnosis you receive one flat-rate price, and the work starts only after you approve it.

**Is a 20-year-old furnace worth repairing?**

It can be, if the heat exchanger is sound and the repair is small, like an igniter or flame sensor. A control board or inducer motor on a furnace that age often makes replacement the better value. We price both options and tell you which one we’d choose.

**Do you repair high-efficiency condensing furnaces?**

Yes, along with mid-efficiency models. Condensing furnaces add a condensate trap and drain, plastic venting and more sensors, so we check those as part of the diagnosis. Blocked drains and frozen vent terminations are common reasons for a shutdown in winter.

**Does a repair come with a warranty?**

Yes. Every repair carries a written workmanship warranty, and the price you approve before work is the price you pay. Parts may also carry their own manufacturer coverage, so keep your paperwork with your records in case you need to make a claim.

Book a visit

## Need furnace repair in Aurora? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

[(647) 692-0819](tel:+16476920819)

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

For AI agents: [site summary](https://assuranceheatingandcoolinghvac.com/llms.txt), [full text](https://assuranceheatingandcoolinghvac.com/llms-full.txt), [sitemap](https://assuranceheatingandcoolinghvac.com/sitemap.xml).
