---
title: "How to bleed a radiator, step by step | Assurance HVAC"
description: "Learn how to bleed a radiator safely: what you need, the steps with the system off and cool, and what to check on the boiler afterwards."
canonical: https://assuranceheatingandcoolinghvac.com/guides/how-to-bleed-a-radiator/
last_updated: 2026-11-05
---

Homeowner guides

# How to bleed a radiator, step by step

[(647) 692-0819](tel:+16476920819) Open 24/7, day or night

Learn how to bleed a radiator and you can fix one of the most common causes of a radiator that is cold at the top. Trapped air collects inside a hot water radiator and blocks the heat, and letting it out takes a few minutes, a small key and a cloth. This guide gives the steps, the safety rules and what to check afterwards. If the radiator stays cold, our [boiler repair](https://assuranceheatingandcoolinghvac.com/services/boiler-repair-toronto/) team can find the cause.

[Call (647) 692-0819](tel:+16476920819) Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

## Key takeaways

- Bleeding lets trapped air out of a hot water radiator so hot water can fill it.
- Turn the heating off and let the radiators cool completely before you start.
- Use a radiator key and a cloth, and close the screw as soon as water appears.
- Check the boiler’s pressure gauge afterwards, and top up only if the manual says how.
- Steam radiators don’t bleed this way. If you’re unsure which you have, ask first.

Last updated November 5, 2026. Written and reviewed by the Assurance HVAC Heating & Cooling service team.

Need a technician?

Flat-rate price before any work starts.
[(647) 692-0819](tel:+16476920819) Request a technician online

**On this page**

- When you need to bleed a radiator
- Check that you have hot water radiators first
- How to bleed a radiator: what you need
- How to bleed a radiator: the steps
- How to bleed a radiator safely: the rules that matter
- How to bleed a radiator and check the boiler after
- Boiler pressure after bleeding: top up only as the manual says
- A radiator still cold at the top after bleeding
- When bleeding is not the answer
- Gas smells and carbon monoxide at the boiler
- Keeping radiators free of air through the season
- How to bleed a radiator: common questions

## When you need to bleed a radiator

Knowing how to bleed a radiator helps when one is hot at the bottom and cool at the top, or when it gurgles, or heats slowly compared with the others. Those signs mean air has collected in the upper part of the radiator and is pushing hot water out of the way.

Air gets in through small leaks, after the system is drained or topped up, or as dissolved air comes out of the water as it heats. It is normal to bleed radiators once a year, usually at the start of the heating season.

## Check that you have hot water radiators first

This method is only for hot water radiators, the kind fed by a boiler and a pump through a sealed loop of pipes. Steam radiators work differently, with a vent valve and a boiler that makes steam, and they are not bled with a key. If yours are steam, leave them alone and call.

A hot water radiator has a small bleed screw, usually a square or slotted brass fitting in one top corner. Many also have a valve at the bottom to turn the radiator on or off. If you see no bleed screw and a round vent instead, you may have an automatic air vent, which does the job itself.

## How to bleed a radiator: what you need

You need very little to do the job, and the key is the one item worth buying if you don’t have it. It costs little at a hardware store, and most keys fit most radiators. The whole job takes only a few minutes per radiator.

- A radiator key, or a flat screwdriver if the bleed screw is slotted
- A cloth or old towel, folded to catch drips
- A small container or cup to hold under the screw
- Your boiler’s manual, to check the pressure steps afterwards
- A pair of gloves, since the first drips can be dark and dirty

## How to bleed a radiator: the steps

Bleeding a radiator is a short, tidy job when you do it in the right order. The most important rule is to work only with the heating off and every radiator cool to the touch. Water and air coming out of a hot radiator can scald.

- Turn the heating off at the thermostat and let the radiators cool completely, which can take a few hours.
- Start on the lowest floor with the radiator closest to the boiler, then work up and outward.
- Hold the cloth under the bleed screw and fit the key onto it.
- Turn the key anticlockwise a quarter turn. You should hear air hiss out.
- Stay beside the radiator. When the hissing stops and the first water shows, close the screw straight away.
- Wipe the area dry and check that no water is still seeping out.
- Repeat on the other radiators, then turn the heating back on.

Never take the bleed screw fully out. Open it a little, wait for the air to leave, and close it again the moment water shows.

## How to bleed a radiator safely: the rules that matter

Bleeding is a safe job when the system is off and cool, and a risky one when it isn’t. The water inside a radiator that has just been running can be hot enough to scald, and the bleed screw is a small, easy-to-lose part.

Keep the cloth close, keep your face back from the screw and keep your hands away from the pipes and valves at the bottom. Don’t force a stuck screw. If it won’t turn with ordinary effort, stop and call, because a snapped screw can release a rush of water.

- Heating off and radiators fully cool before you open anything
- Close the screw the moment water appears, not after it runs
- Protect floors, since the first water is often dark
- Leave the boiler’s covers, wiring and gas controls alone

## How to bleed a radiator and check the boiler after

Letting air out also lets out a little water, so the pressure in the system can drop. After you bleed a radiator, look at the boiler’s pressure gauge. If the pressure has fallen below the normal range for your boiler, it needs attention before you run the heating for long.

Turn the heating back on, give the system time to warm and check that each radiator is hot from top to bottom. A radiator that is now fully hot was the fix. One that is still cold at the top may need a second go, or something else is wrong.

## Boiler pressure after bleeding: top up only as the manual says

If bleeding drops the pressure, you can refill it only where your boiler’s manual walks you through the method. Some models have a filling loop with clear steps, and others do not. Can’t find the steps, or not sure? Call rather than guess.

Where the manual does cover it, follow it to the letter and stop when the gauge is back in the normal range. Our guide to [boiler pressure](https://assuranceheatingandcoolinghvac.com/guides/boiler-pressure/) explains the numbers. If you keep needing to top up, there is a leak or a failed part, and a technician should look.

## A radiator still cold at the top after bleeding

A radiator that stays cold at the top after bleeding usually means air is still trapped, or something else is blocking the flow. A second bleed once the system has cooled again is fair, and you should hear less air each time. If nothing comes out, the air is not the problem.

Other causes include a stuck valve at the bottom of the radiator, a build-up of sludge, a failing pump or poorly balanced radiators. Our guide to [radiators not heating](https://assuranceheatingandcoolinghvac.com/guides/radiators-not-heating/) walks through each of them, and a technician can sort out the ones that need tools.

## When bleeding is not the answer

Bleeding fixes trapped air and nothing else. If a radiator is cold all over, noisy in a different way or leaking, letting out air won’t help. If you are bleeding the same radiator every week, something is feeding air into the system, and that is a repair.

- A radiator cold all over, or the whole house cold, points elsewhere
- Bleeding that never lets out air means air is not the issue
- Water that keeps coming out of the bleed screw or a valve, a leak to fix
- Pressure that keeps dropping, which needs a technician to trace
- Banging or rumbling from the boiler itself, which is not an air problem

## Gas smells and carbon monoxide at the boiler

The job puts you near a gas boiler, so learn two safety rules before you start. A gas smell at any point means leaving the house with no switches touched and no phone used inside, then ringing Enbridge Gas at 1-866-763-5427 once you are out.

A sounding carbon monoxide alarm is the other rule: people and pets go outside together and someone calls 911. In Ontario, any home with a fuel-burning appliance, a fireplace or an attached garage needs a CO alarm beside each sleeping area and, since January 1, 2026, one on every storey, and Enbridge’s [gas safety pages](https://www.enbridgegas.com/safety) describe what to watch for.

## Keeping radiators free of air through the season

A yearly bleed at the start of the heating season keeps most radiators working well. Check them again if one feels cooler, and write down the date so you can see a pattern. A system that needs bleeding often is trying to tell you something.

At an annual service a technician looks over the automatic vents, expansion tank and pump, which cuts down the air that gets in. The [maintenance plan](https://assuranceheatingandcoolinghvac.com/maintenance-plan/) includes a yearly boiler service before winter, and the [contact page](https://assuranceheatingandcoolinghvac.com/contact/) is the place to ask for help with a radiator that won’t heat.

Find these guides useful? Add Assurance HVAC Heating & Cooling as a preferred source, and Google shows our articles more often in your Top Stories when you search.
[Add as a preferred sourceon Google](https://www.google.com/preferences/source?q=assuranceheatingandcoolinghvac.com)

FAQ

## How to bleed a radiator: common questions

**How often should I bleed my radiators?**

Once a year, at the start of the heating season, is enough for most homes. Bleed sooner if one feels cold at the top while the bottom is hot, or if it gurgles. If you are bleeding the same radiator every few weeks, air is getting in from somewhere and the system needs a look.

**Can I bleed a radiator while the heating is on?**

No. Turn the heating off and wait until the radiators are completely cool first. Hot water and air coming out of the screw can scald, and the pump pushes water harder when it runs. A few hours with the thermostat down is usually enough.

**How to bleed a radiator without making a mess?**

Hold a folded cloth under the screw and a cup beneath it. Close it as soon as the hissing stops and the first water appears. Turn it back clockwise firmly but gently, since it only needs to be snug, then wipe it dry and check for seeping.

**Why is no air coming out when I bleed the radiator?**

Either the radiator has no air in it, or the screw isn’t open far enough. If water appears at once, air was not the reason it’s cold. Look at the valve at the bottom, the pump and the pressure gauge, or call us if it still won’t heat.

**Do I need to top up the boiler after bleeding?**

Glance at the pressure gauge. Still in the normal range for your boiler? Nothing more to do. If it has dropped, refill only by the method in the manual. With no instructions there, or pressure that keeps sinking, call a technician.

**Can I bleed steam radiators?**

No, not with a radiator key. Steam systems use air vents and work at different conditions, and opening the wrong fitting can release hot steam or water. If your radiators are steam, or you can’t tell, leave them and book a technician to look.

**What if the bleed screw is stuck or leaks?**

Stop and don’t force it. A stuck screw can snap and release a rush of water, and one that leaks after you close it needs a new part. Put a towel and a container under it, keep the heating off and call us to repair it.

**Who can fix my radiators in the GTA?**

Assurance HVAC Heating & Cooling covers Oakville, Mississauga, Vaughan, Richmond Hill, Markham, North York and Toronto with TSSA-certified gas technicians. A flat-rate price is agreed first, nothing starts without your yes, and a written workmanship warranty follows the job. Someone answers every hour of the day.

Book a visit

## Still no heat? We’ll call you back to book a technician.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

[(647) 692-0819](tel:+16476920819)

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

For AI agents: [site summary](https://assuranceheatingandcoolinghvac.com/llms.txt), [full text](https://assuranceheatingandcoolinghvac.com/llms-full.txt), [sitemap](https://assuranceheatingandcoolinghvac.com/sitemap.xml).
