---
title: "Goodman heat pump repair in Toronto | Assurance HVAC"
description: "Goodman heat pump repair in Toronto and the GTA: winter no-heat faults, icing, reversing valves and more. Flat-rate price before any work starts."
canonical: https://assuranceheatingandcoolinghvac.com/brands/goodman-heat-pump-repair/
last_updated: 2026-11-10
---

Brands we repair

# Goodman heat pump repair in Toronto

[(647) 692-0819](tel:+16476920819) Open 24/7, day or night

A heat pump works in both seasons, so Goodman heat pump repair is a year-round job: no heat in January, no cooling in July, or an outdoor unit buried in ice. We handle [heat pump service in Toronto](https://assuranceheatingandcoolinghvac.com/services/heat-pump-installation-toronto/) and the GTA, and this page covers what to check, what we can and can’t say about Goodman’s heat pumps and what a repair visit involves.

[Call (647) 692-0819](tel:+16476920819) Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

## Key takeaways

- Goodman is part of Daikin Group, and our sources don’t describe its Canadian heat pump lines.
- Winter faults to watch for: ice on the outdoor unit, cold air and a unit stuck in emergency heat.
- A reversing valve or defrost fault can affect both heating and cooling.
- Cooling-side work is done by 313A-certified mechanics, gas backup work by TSSA technicians.
- Open 24/7 for no-heat calls in the GTA, with a flat-rate price first.

Last updated November 10, 2026. Written and reviewed by the Assurance HVAC Heating & Cooling service team.

Need a technician?

Flat-rate price before any work starts.
[(647) 692-0819](tel:+16476920819) Request a technician online

**On this page**

- Goodman heat pump repair, winter and summer
- What we can say about Goodman heat pumps
- Goodman heat pump repair in winter: ice, cold air, emergency heat
- Cooling faults on a heat pump
- Heat pump parts we repair or replace
- What a Goodman heat pump owner can check
- Goodman heat pump fault codes on the GLZT7C two-stage model
- Where the Goodman rating plate is
- Warranty, registration and Canadian terms
- Repair or replace an older heat pump
- How a Goodman heat pump repair visit works
- Goodman heat pump repair questions

## Goodman heat pump repair, winter and summer

A heat pump moves heat one way in summer and the other way in winter, so a fault in the switching or the outdoor unit can show up in either season. Goodman heat pump repair therefore starts with when the symptom appears. We repair Goodman heat pumps in Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville.

## What we can say about Goodman heat pumps

Goodman’s website carries the Daikin Comfort Technologies North America name and refers to a Daikin Homeowner Support team. Goodman Global’s brands include Amana, GMC, Goodman and Janitrol, and Daikin bought the company in 2012.

We haven’t verified Goodman’s current Canadian heat pump models or cold-climate claims, so we don’t state them here. Fault codes for one current two-stage model are in the table further down. We diagnose from the unit’s model number and what the equipment does.

## Goodman heat pump repair in winter: ice, cold air, emergency heat

A light frost on the outdoor coil is normal in cold, damp weather, but a thick shell of ice or a fan that’s frozen in place is not. A heat pump regularly clears frost with a defrost cycle, and a fault in that cycle is one of the most common winter calls.

- Heavy ice that doesn’t clear after the unit goes through a defrost cycle
- Cool or lukewarm air from the vents when the outdoor unit runs
- A thermostat showing emergency or auxiliary heat for long stretches
- A rise in the electric bill with no change in habits
- Steam and a brief whoosh as the unit switches into or out of defrost are normal, but grinding, or a hiss that doesn’t stop, is not

## Cooling faults on a heat pump

In summer the same machine acts as an air conditioner, so it can suffer the same electrical and refrigerant faults, plus any problem with the reversing valve that sends it the wrong way.

- Warm air with the compressor running, which may be the charge or the reversing valve
- Humming with a stopped fan, often a capacitor
- Frost on the indoor coil
- Water leaking near the indoor unit from a blocked condensate line

## Heat pump parts we repair or replace

These are the parts behind most heat pump calls, and a mechanic usually tests several before naming the culprit. A good diagnosis finds the failed part and the reason it failed.

- Reversing valve, which switches between heating and cooling
- Defrost control board and defrost sensor
- Run and start capacitors, and the contactor
- Outdoor fan motor and blade
- Refrigerant leaks, repaired before any recharge
- Auxiliary heat elements and relays in an air handler
- Condensate drains and thermostat or low-voltage wiring

## What a Goodman heat pump owner can check

Four checks are worth five minutes before you book, and all of them are safe to do without tools or opening any panel. They also give the mechanic useful clues when you call, so note what you find.

- Thermostat in the right mode with the setpoint moved a few degrees
- A clean filter, since a blocked one hurts both heating and cooling
- Snow cleared from around the outdoor unit and off its top, gently by hand, with the unit’s power left alone
- Breaker and outdoor disconnect on

Don’t chip ice off the coil with a tool. The fins and refrigerant lines are easy to damage, and a repair for that costs more than the original problem.

## Goodman heat pump fault codes on the GLZT7C two-stage model

These codes are from Goodman’s [GLZT7C heat pump installation and service reference](https://mobile.goodmanmfg.com/mobileapp/stellent/pdf/infoPdf/Lit/IOG-4056D.pdf), part IOG-4056D, which covers the two-stage R-32 *LZT7C models from 2 to 5 tons. The outdoor unit’s control board shows each code on three small 7-segment displays and can recall its six most recent faults.

That board sits inside the outdoor unit, so a technician reads it. Goodman also warns that a tripped breaker may mean an electrical problem and should not be reset without proper troubleshooting, so call instead of resetting it. A defrost cycle on this model runs for 10 minutes at most. A code names a part to check, not a final diagnosis.

Fault codes on Goodman GLZT7C two-stage heat pumps (*LZT7C, R-32)
Code | What it means | What to do |
A2 | Outdoor air temperature sensor fault | Book a repair |
A3 | Outdoor coil temperature sensor fault; the heat pump may not heat | Book a repair |
E5 | Open fuse or a short in the low voltage wiring | Call a technician |
b0 | Indoor blower not running when it should, or a communication error between the units (communicating systems only) | Call a technician |
01 | Low side fault or low pressure cut out trip | Call a technician |
L1 | Low pressure cut out lockout after 3 trips | Call a technician |
02 | High side fault or high pressure cut out trip | Call a technician |
03 | Short cycling: the last 4 cycles each ran under 3 minutes | Call a technician |
04 | Locked rotor: the compressor can’t turn | Call a technician |
05 | Open circuit, such as power disconnected | Check that the breaker and outdoor disconnect are on; if a breaker has tripped, call a technician |
H8 | High line voltage (above 255 VAC) | Call a technician |
L8 | Low or no line voltage (below 185 VAC) | Check the breaker; if it has tripped, call a technician instead of resetting it |
P0 | Compressor protector open: no current through the compressor windings | Call a technician |

Ask whoever reads the board for the exact code, and note what the system was doing when it stopped. Our technicians check the six-fault history on site and test the sensor, switch or compressor part the code points to before replacing anything. Other Goodman models use different controls, so the model number on the rating plate matters.

## Where the Goodman rating plate is

The model and serial numbers are on the unit’s rating plate. Goodman’s cooling-system FAQ, a US page, says the plate is generally found slightly above the refrigerant valves on the back side of the unit. Our sources don’t give a separate spot for heat pumps, so that is where we would start looking, and no panels need to come off.

A photo of the plate and your install invoice help us look up the unit before we arrive.

## Warranty, registration and Canadian terms

Daikin’s warranty page links to a Goodman warranty registration and lookup site. We can’t give you a length or a Canadian deadline, so check Goodman’s Canadian page and keep your paperwork. If a part looks to be covered, we’ll say so, but we don’t perform warranty work for the maker.

Rebates apply to heat pump installations, not repairs. For new equipment, see our [rebates page](https://assuranceheatingandcoolinghvac.com/rebates/) and the [Home Renovation Savings Program](https://saveonenergy.ca/homerenovationsavings), where amounts depend on your home and current heating fuel.

## Repair or replace an older heat pump

A heat pump typically lasts about 15 years, so a Goodman heat pump repair on a newer unit is usually worthwhile. A failed capacitor or fan motor is a clear repair, while a failed compressor or a leaking coil on an aging unit is the moment to compare against a new, more efficient system.

How we frame the decision
Situation | Usual call |
Capacitor, contactor, fan motor, any age | Repair |
Reversing valve or defrost fault, under 10 years | Repair |
Compressor or leak, 10 to 15 years | Compare repair and replacement (HSPF2 and SEER2) |
Past 15 years with repeated faults | Replace |

## How a Goodman heat pump repair visit works

We are open 24/7, with technicians out day or night for no-heat emergencies. Booked visits get a two-hour arrival window and a text when the technician is on the way. The mechanic diagnoses the unit, then gives you a flat-rate price to approve before any repair.

For local detail, see [heat pump installation in Mississauga](https://assuranceheatingandcoolinghvac.com/service-area/mississauga/heat-pump-installation/), or reach the maker through the contact page on Goodman’s website.

Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Goodman. Brand names are trademarks of their owners.

FAQ

## Goodman heat pump repair questions

**Why is there ice on my Goodman heat pump?**

Frost is normal in cold, damp weather, and the unit clears it with a defrost cycle. A thick shell of ice that stays means the cycle isn’t working, airflow is poor or the charge is off. Don’t chip it. Switch the system to emergency heat if you have it and call.

**Is my Goodman heat pump made by Daikin?**

Goodman Manufacturing is an independent subsidiary of Daikin Group, which bought Goodman Global in 2012. Goodman’s website carries the Daikin Comfort name. We don’t claim shared parts or factories with Daikin’s own heat pumps, and we repair each by its own model number.

**Does a Goodman heat pump work in a Toronto winter?**

Our sources don’t describe Goodman’s cold-climate ratings, so we can’t quote one. Heat pumps in general lose output as it gets colder, and many homes pair them with backup heat. If your unit struggles in a cold snap, we diagnose whether it’s a fault or a sizing limit.

**What is emergency heat and should I use it?**

Emergency or auxiliary heat is the backup heat source, often electric elements in the air handler. It runs when the heat pump can’t keep up or has failed. It costs more to run, so use it as a short-term measure while you book a repair, not as a habit.

**What should I have ready when I call about my Goodman heat pump?**

Have the model and serial numbers if you can read them safely, the age of the unit, and a note of what it does and when: ice, cold air, odd noises or a tripped breaker. Mention whether the system has backup heat. That lets us plan the visit and bring likely parts.

**Can you repair a Goodman heat pump in Oakville or Vaughan?**

Yes. We repair heat pumps in Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville. Cooling-side work is done by 313A-certified mechanics, and you approve a flat-rate price before any work starts. We also take no-heat calls 24/7, and the same flat-rate rule applies at night.

**What does a Goodman heat pump error code mean?**

It names the fault the outdoor control board detected. On Goodman’s GLZT7C two-stage heat pump, L1 is a low pressure lockout after three trips and A2 is an outdoor air temperature sensor fault. The code shows on the board inside the outdoor unit, so a technician reads it. Other Goodman models use different controls, so tell us the model number when you call.

**Is a heat pump repair covered by a rebate?**

Rebates are for new equipment, not repairs. The Home Renovation Savings Program is the open program we point to for heat pump installations, and amounts depend on your home and current heating fuel. If your unit is near the end of its life, we can talk through your options.

Book a visit

## Need Goodman heat pump repair? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

[(647) 692-0819](tel:+16476920819)

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

For AI agents: [site summary](https://assuranceheatingandcoolinghvac.com/llms.txt), [full text](https://assuranceheatingandcoolinghvac.com/llms-full.txt), [sitemap](https://assuranceheatingandcoolinghvac.com/sitemap.xml).
